\n

LVD

Peripheral Memory Blocks

address_offset : 0x0 Bytes (0x0)
size : 0x100 byte (0x0)
mem_usage : registers
protection :

Registers

LVIM

LVIS


LVIM

Voltage detection register
address_offset : 0x1 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

LVIM LVIM read-write 0 1 2 3 4 5 6 7 Resets to 0 0 0 0 0 0 0 0 LVIF LVIOMSK LVISEN

LVIF : Voltage detection flag
bits : 0 - 0 (1 bit)
access : read-only

Enumeration:

0 : GE

Supply voltage (VDD) greater or equal to detection voltage (VLVD), or when LVD is off

1 : LT

Supply voltage (VDD) less than detection voltage (VLVD)

End of enumeration elements list.

LVIOMSK : Mask status flag of LVD output
bits : 1 - 2 (2 bit)
access : read-only

Enumeration:

0 : Invalid

Mask of LVD output is invalid

1 : Valid

Mask of LVD output is valid

End of enumeration elements list.

LVISEN : Enable rewritting LVIS register
bits : 7 - 14 (8 bit)
access : read-only

Enumeration:

0 : Disable

Disabling of rewriting the LVIS register

1 : Enable

Enabling of rewriting the LVIS register

End of enumeration elements list.


LVIS

Voltage detection level register
address_offset : 0x2 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0

LVIS LVIS read-write 0 1 2 3 4 5 6 7 Resets to 0 0 0 0 0 0 0 0 LVILV LVIMD

LVILV : LVD detection level
bits : 0 - 0 (1 bit)
access : read-write

Enumeration:

0 : High

High-voltage detection level (VLVDH)

1 : Low

Low-voltage detection level (VLVDL or VLVD)

End of enumeration elements list.

LVIMD : Operation mode of voltage detection
bits : 7 - 14 (8 bit)
access : read-write

Enumeration:

0 : IRQ

interrupt mode

1 : Reset

reset mode

End of enumeration elements list.



Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.