\n
address_offset : 0x0 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection :
ComparatorControl Register 1
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CMP1EN : CMP1EN field description
bits : 0 - 0 (1 bit)
access : read-write
V1NSEL : V1NSEL field description
bits : 1 - 2 (2 bit)
access : read-write
V1PSEL : V1PSEL field description
bits : 3 - 4 (2 bit)
access : read-write
POL : POL field description
bits : 5 - 5 (1 bit)
access : read-write
CMP1O : CMP1O field description
bits : 8 - 8 (1 bit)
access : read-only
Comparator Control Register 2
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CMP2EN : CMP2EN field description
bits : 0 - 0 (1 bit)
access : read-write
V2NSEL : V2NSEL field description
bits : 1 - 2 (2 bit)
access : read-write
V2PSEL : V2PSEL field description
bits : 3 - 3 (1 bit)
access : read-write
POL : POL field description
bits : 5 - 5 (1 bit)
access : read-write
CMP2O : CMP2O field description
bits : 8 - 8 (1 bit)
access : read-only
Comparator Interrupt Config Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CMP1IE : CMP1IE field description
bits : 0 - 0 (1 bit)
CMP2IE : CMP2IE field description
bits : 1 - 1 (1 bit)
CMP1SEL : CMP1SEL field description
bits : 2 - 3 (2 bit)
CMP2SEL : CMP2SEL field description
bits : 4 - 5 (2 bit)
CMP1DF : CMP1DF field description
bits : 8 - 8 (1 bit)
CMP2DF : CMP2DF field description
bits : 9 - 9 (1 bit)
Comparator Interrupt Status Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CMP1IF : CMP1IF field description
bits : 0 - 0 (1 bit)
CMP2IF : CMP2IF field description
bits : 1 - 1 (1 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.