\n
address_offset : 0x0 Bytes (0x0)
size : 0x3C byte (0x0)
mem_usage : registers
protection :
I2C Master Config Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSPEN : MSPEN field description
bits : 0 - 0 (1 bit)
TOEN : TOEN field description
bits : 1 - 1 (1 bit)
MSP_DMAEN : MSP_DMAEN field description
bits : 16 - 16 (1 bit)
AUTOEND : AUTOEND field description
bits : 17 - 17 (1 bit)
I2C Master Status Register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ACKMO : ACKMO field description
bits : 0 - 0 (1 bit)
access : read-write
BF : BF field description
bits : 2 - 2 (1 bit)
access : read-only
RW : RW field description
bits : 4 - 4 (1 bit)
access : read-only
BUSY : BUSY field description
bits : 5 - 5 (1 bit)
access : read-only
I2C Master Baud rate Generator Register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSPBRGL : MSPBRGL field description
bits : 0 - 8 (9 bit)
MSPBRGH : MSPBRGH field description
bits : 16 - 24 (9 bit)
I2C Master transfer Buffer
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
MSPBUF : MSPBUF field description
bits : 0 - 7 (8 bit)
I2C Master Timing Control Register
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SDAHD : SDAHD field description
bits : 0 - 8 (9 bit)
I2C Master Time-Out Register
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TIMEOUT : TIMEOUT field description
bits : 0 - 11 (12 bit)
I2C Slave Control Register
address_offset : 0x24 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SSPEN : SSPEN field description
bits : 0 - 0 (1 bit)
A10EN : A10EN field description
bits : 1 - 1 (1 bit)
SCLI_ANFEN : SCLI_ANFEN field description
bits : 2 - 2 (1 bit)
SDAO_DLYEN : SDAO_DLYEN field description
bits : 3 - 3 (1 bit)
ACKEN : ACKEN field description
bits : 4 - 4 (1 bit)
SSP_DMAEN : SSP_DMAEN field description
bits : 8 - 8 (1 bit)
SCLSEN : SCLSEN field description
bits : 9 - 9 (1 bit)
I2C Slave Interrupt Enable Register
address_offset : 0x28 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RXIE : RXIE field description
bits : 0 - 0 (1 bit)
TXIE : TXIE field description
bits : 1 - 1 (1 bit)
ADME : ADME field description
bits : 2 - 2 (1 bit)
SSPOVE : SSPOVE field description
bits : 3 - 3 (1 bit)
WCOLE : WCOLE field description
bits : 4 - 4 (1 bit)
PE : PE field description
bits : 5 - 5 (1 bit)
SE : SE field description
bits : 6 - 6 (1 bit)
ADEE : ADEE field description
bits : 7 - 7 (1 bit)
I2C Slave Interrupt Status Register
address_offset : 0x2C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RXIF : RXIF field description
bits : 0 - 0 (1 bit)
access : read-write
TXIF : TXIF field description
bits : 1 - 1 (1 bit)
access : read-write
ADM : ADM field description
bits : 2 - 2 (1 bit)
access : read-write
SSPOV : SSPOV field description
bits : 3 - 3 (1 bit)
access : read-write
WCOL : WCOL field description
bits : 4 - 4 (1 bit)
access : read-write
P : P field description
bits : 5 - 5 (1 bit)
access : read-only
S : S field description
bits : 6 - 6 (1 bit)
access : read-only
ADE : ADE field description
bits : 7 - 7 (1 bit)
access : read-write
I2C Slave Status Register
address_offset : 0x30 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
BF : BF field description
bits : 0 - 0 (1 bit)
DA : DA field description
bits : 1 - 1 (1 bit)
RW : RW field description
bits : 2 - 2 (1 bit)
BUSY : BUSY field description
bits : 3 - 3 (1 bit)
I2C Slave transfer Buffer
address_offset : 0x34 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SSPBUF : SSPBUF field description
bits : 0 - 7 (8 bit)
I2C Slave Address Register
address_offset : 0x38 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SSPADDR : SSPADDR field description
bits : 0 - 9 (10 bit)
I2C Master Control Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SEN : SEN field description
bits : 0 - 0 (1 bit)
RSEN : RSEN field description
bits : 1 - 1 (1 bit)
PEN : PEN field description
bits : 2 - 2 (1 bit)
RCEN : RCEN field description
bits : 3 - 3 (1 bit)
I2C Master Intterupt Enable Register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RXIE : RXIE field description
bits : 0 - 0 (1 bit)
TXIE : TXIE field description
bits : 1 - 1 (1 bit)
NACKE : NACKE field description
bits : 2 - 2 (1 bit)
PE : PE field description
bits : 3 - 3 (1 bit)
SE : SE field description
bits : 4 - 4 (1 bit)
OVTE : OVTE field description
bits : 5 - 5 (1 bit)
WCOLE : WCOLE field description
bits : 6 - 6 (1 bit)
I2C Master Interrupt Status Register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RXIF : RXIF field description
bits : 0 - 0 (1 bit)
access : read-write
TXIF : TXIF field description
bits : 1 - 1 (1 bit)
access : read-write
ACKSTA : ACKSTA field description
bits : 2 - 2 (1 bit)
access : read-write
P : P field description
bits : 3 - 3 (1 bit)
access : read-only
S : S field description
bits : 4 - 4 (1 bit)
access : read-only
OVT : OVT field description
bits : 5 - 5 (1 bit)
access : read-only
WCOL : WCOL field description
bits : 6 - 6 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.