\n
address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection :
interrupt mask
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTMSK0 : interrupt mask on signal line 0
bits : 0 - 0 (1 bit)
access : read-write
INTMSK1 : interrupt mask on signal line 1
bits : 1 - 1 (1 bit)
access : read-write
INTMSK2 : interrupt mask on signal line 2
bits : 2 - 2 (1 bit)
access : read-write
INTMSK3 : interrupt mask on signal line 3
bits : 3 - 3 (1 bit)
access : read-write
INTMSK4 : interrupt mask on signal line 4
bits : 4 - 4 (1 bit)
access : read-write
INTMSK5 : interrupt mask on signal line 5
bits : 5 - 5 (1 bit)
access : read-write
INTMSK6 : interrupt mask on signal line 6
bits : 6 - 6 (1 bit)
access : read-write
INTMSK7 : interrupt mask on signal line 7
bits : 7 - 7 (1 bit)
access : read-write
INTMSK8 : interrupt mask on signal line 8
bits : 8 - 8 (1 bit)
access : read-write
INTMSK9 : interrupt mask on signal line 9
bits : 9 - 9 (1 bit)
access : read-write
INTMSK10 : interrupt mask on signal line 10
bits : 10 - 10 (1 bit)
access : read-write
INTMSK11 : interrupt mask on signal line 11
bits : 11 - 11 (1 bit)
access : read-write
INTMSK12 : interrupt mask on signal line 12
bits : 12 - 12 (1 bit)
access : read-write
INTMSK13 : interrupt mask on signal line 13
bits : 13 - 13 (1 bit)
access : read-write
INTMSK14 : interrupt mask on signal line 14
bits : 14 - 14 (1 bit)
access : read-write
INTMSK15 : interrupt mask on signal line 15
bits : 15 - 15 (1 bit)
access : read-write
INTMSK17 : interrupt mask on signal line 17
bits : 17 - 17 (1 bit)
access : read-write
INTMSK19 : interrupt mask on signal line 19
bits : 19 - 19 (1 bit)
access : read-write
INTMSK23 : interrupt mask on signal line 23
bits : 23 - 23 (1 bit)
access : read-write
INTMSK24 : interrupt mask on signal line 24
bits : 24 - 24 (1 bit)
access : read-write
INTMSK25 : interrupt mask on signal line 25
bits : 25 - 25 (1 bit)
access : read-write
Software interrupt event trigger
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SWINTEVT0 : Software interrupt event trigger on signal line 0
bits : 0 - 0 (1 bit)
access : read-write
SWINTEVT1 : Software interrupt event trigger on signal line 1
bits : 1 - 1 (1 bit)
access : read-write
SWINTEVT2 : Software interrupt event trigger on signal line 2
bits : 2 - 2 (1 bit)
access : read-write
SWINTEVT3 : Software interrupt event trigger on signal line 3
bits : 3 - 3 (1 bit)
access : read-write
SWINTEVT4 : Software interrupt event trigger on signal line 4
bits : 4 - 4 (1 bit)
access : read-write
SWINTEVT5 : Software interrupt event trigger on signal line 5
bits : 5 - 5 (1 bit)
access : read-write
SWINTEVT6 : Software interrupt event trigger on signal line 6
bits : 6 - 6 (1 bit)
access : read-write
SWINTEVT7 : Software interrupt event trigger on signal line 7
bits : 7 - 7 (1 bit)
access : read-write
SWINTEVT8 : Software interrupt event trigger on signal line 8
bits : 8 - 8 (1 bit)
access : read-write
SWINTEVT9 : Software interrupt event trigger on signal line 9
bits : 9 - 9 (1 bit)
access : read-write
SWINTEVT10 : Software interrupt event trigger on signal line 10
bits : 10 - 10 (1 bit)
access : read-write
SWINTEVT11 : Software interrupt event trigger on signal line 11
bits : 11 - 11 (1 bit)
access : read-write
SWINTEVT12 : Software interrupt event trigger on signal line 12
bits : 12 - 12 (1 bit)
access : read-write
SWINTEVT13 : Software interrupt event trigger on signal line 13
bits : 13 - 13 (1 bit)
access : read-write
SWINTEVT14 : Software interrupt event trigger on signal line 14
bits : 14 - 14 (1 bit)
access : read-write
SWINTEVT15 : Software interrupt event trigger on signal line 15
bits : 15 - 15 (1 bit)
access : read-write
SWINTEVT17 : Software interrupt event trigger on signal line 17
bits : 17 - 17 (1 bit)
access : read-write
SWINTEVT19 : Software interrupt event trigger on signal line 19
bits : 19 - 19 (1 bit)
access : read-write
interrupt flag
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
INTF0 : interrupt flag on signal line 0
bits : 0 - 0 (1 bit)
access : read-write
INTF1 : interrupt flag on signal line 1
bits : 1 - 1 (1 bit)
access : read-write
INTF2 : interrupt flag on signal line 2
bits : 2 - 2 (1 bit)
access : read-write
INTF3 : interrupt flag on signal line 3
bits : 3 - 3 (1 bit)
access : read-write
INTF4 : interrupt flag on signal line 4
bits : 4 - 4 (1 bit)
access : read-write
INTF5 : interrupt flag on signal line 5
bits : 5 - 5 (1 bit)
access : read-write
INTF6 : interrupt flag on signal line 6
bits : 6 - 6 (1 bit)
access : read-write
INTF7 : interrupt flag on signal line 7
bits : 7 - 7 (1 bit)
access : read-write
INTF8 : interrupt flag on signal line 8
bits : 8 - 8 (1 bit)
access : read-write
INTF9 : interrupt flag on signal line 9
bits : 9 - 9 (1 bit)
access : read-write
INTF10 : interrupt flag on signal line 10
bits : 10 - 10 (1 bit)
access : read-write
INTF11 : interrupt flag on signal line 11
bits : 11 - 11 (1 bit)
access : read-write
INTF12 : interrupt flag on signal line 12
bits : 12 - 12 (1 bit)
access : read-write
INTF13 : interrupt flag on signal line 13
bits : 13 - 13 (1 bit)
access : read-write
INTF14 : interrupt flag on signal line 14
bits : 14 - 14 (1 bit)
access : read-write
INTF15 : interrupt flag on signal line 15
bits : 15 - 15 (1 bit)
access : read-write
INTF17 : interrupt flag on signal line 17
bits : 17 - 17 (1 bit)
access : read-write
INTF19 : interrupt flag on signal line 19
bits : 19 - 19 (1 bit)
access : read-write
event mask
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EVTMSK0 : event mask on signal line 0
bits : 0 - 0 (1 bit)
access : read-write
EVTMSK1 : event mask on signal line 1
bits : 1 - 1 (1 bit)
access : read-write
EVTMSK2 : event mask on signal line 2
bits : 2 - 2 (1 bit)
access : read-write
EVTMSK3 : event mask on signal line 3
bits : 3 - 3 (1 bit)
access : read-write
EVTMSK4 : event mask on signal line 4
bits : 4 - 4 (1 bit)
access : read-write
EVTMSK5 : event mask on signal line 5
bits : 5 - 5 (1 bit)
access : read-write
EVTMSK6 : event mask on signal line 6
bits : 6 - 6 (1 bit)
access : read-write
EVTMSK7 : event mask on signal line 7
bits : 7 - 7 (1 bit)
access : read-write
EVTMSK8 : event mask on signal line 8
bits : 8 - 8 (1 bit)
access : read-write
EVTMSK9 : event mask on signal line 9
bits : 9 - 9 (1 bit)
access : read-write
EVTMSK10 : event mask on signal line 10
bits : 10 - 10 (1 bit)
access : read-write
EVTMSK11 : event mask on signal line 11
bits : 11 - 11 (1 bit)
access : read-write
EVTMSK12 : event mask on signal line 12
bits : 12 - 12 (1 bit)
access : read-write
EVTMSK13 : event mask on signal line 13
bits : 13 - 13 (1 bit)
access : read-write
EVTMSK14 : event mask on signal line 14
bits : 14 - 14 (1 bit)
access : read-write
EVTMSK15 : event mask on signal line 15
bits : 15 - 15 (1 bit)
access : read-write
EVTMSK17 : event mask on signal line 17
bits : 17 - 17 (1 bit)
access : read-write
EVTMSK19 : event mask on signal line 19
bits : 19 - 19 (1 bit)
access : read-write
EVTMSK23 : event mask on signal line 23
bits : 23 - 23 (1 bit)
access : read-write
EVTMSK24 : event mask on signal line 24
bits : 24 - 24 (1 bit)
access : read-write
EVTMSK25 : event mask on signal line 25
bits : 25 - 25 (1 bit)
access : read-write
rising detection enable
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RDEN0 : rising detection enable on signal line 0
bits : 0 - 0 (1 bit)
access : read-write
RDEN1 : rising detection enable on signal line 1
bits : 1 - 1 (1 bit)
access : read-write
RDEN2 : rising detection enable on signal line 2
bits : 2 - 2 (1 bit)
access : read-write
RDEN3 : rising detection enable on signal line 3
bits : 3 - 3 (1 bit)
access : read-write
RDEN4 : rising detection enable on signal line 4
bits : 4 - 4 (1 bit)
access : read-write
RDEN5 : rising detection enable on signal line 5
bits : 5 - 5 (1 bit)
access : read-write
RDEN6 : rising detection enable on signal line 6
bits : 6 - 6 (1 bit)
access : read-write
RDEN7 : rising detection enable on signal line 7
bits : 7 - 7 (1 bit)
access : read-write
RDEN8 : rising detection enable on signal line 8
bits : 8 - 8 (1 bit)
access : read-write
RDEN9 : rising detection enable on signal line 9
bits : 9 - 9 (1 bit)
access : read-write
RDEN10 : rising detection enable on signal line 10
bits : 10 - 10 (1 bit)
access : read-write
RDEN11 : rising detection enable on signal line 11
bits : 11 - 11 (1 bit)
access : read-write
RDEN12 : rising detection enable on signal line 12
bits : 12 - 12 (1 bit)
access : read-write
RDEN13 : rising detection enable on signal line 13
bits : 13 - 13 (1 bit)
access : read-write
RDEN14 : rising detection enable on signal line 14
bits : 14 - 14 (1 bit)
access : read-write
RDEN15 : rising detection enable on signal line 15
bits : 15 - 15 (1 bit)
access : read-write
RDEN17 : rising detection enable on signal line 17
bits : 17 - 17 (1 bit)
access : read-write
RDEN19 : rising detection enable on signal line 19
bits : 19 - 19 (1 bit)
access : read-write
falling detection enable
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FDEN0 : falling detection enable on signal line 0
bits : 0 - 0 (1 bit)
access : read-write
FDEN1 : falling detection enable on signal line 1
bits : 1 - 1 (1 bit)
access : read-write
FDEN2 : falling detection enable on signal line 2
bits : 2 - 2 (1 bit)
access : read-write
FDEN3 : falling detection enable on signal line 3
bits : 3 - 3 (1 bit)
access : read-write
FDEN4 : falling detection enable on signal line 4
bits : 4 - 4 (1 bit)
access : read-write
FDEN5 : falling detection enable on signal line 5
bits : 5 - 5 (1 bit)
access : read-write
FDEN6 : falling detection enable on signal line 6
bits : 6 - 6 (1 bit)
access : read-write
FDEN7 : falling detection enable on signal line 7
bits : 7 - 7 (1 bit)
access : read-write
FDEN8 : falling detection enable on signal line 8
bits : 8 - 8 (1 bit)
access : read-write
FDEN9 : falling detection enable on signal line 9
bits : 9 - 9 (1 bit)
access : read-write
FDEN10 : falling detection enable on signal line 10
bits : 10 - 10 (1 bit)
access : read-write
FDEN11 : falling detection enable on signal line 11
bits : 11 - 11 (1 bit)
access : read-write
FDEN12 : falling detection enable on signal line 12
bits : 12 - 12 (1 bit)
access : read-write
FDEN13 : falling detection enable on signal line 13
bits : 13 - 13 (1 bit)
access : read-write
FDEN14 : falling detection enable on signal line 14
bits : 14 - 14 (1 bit)
access : read-write
FDEN15 : falling detection enable on signal line 15
bits : 15 - 15 (1 bit)
access : read-write
FDEN17 : falling detection enable on signal line 17
bits : 17 - 17 (1 bit)
access : read-write
FDEN19 : falling detection enable on signal line 19
bits : 19 - 19 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.