\n
address_offset : 0x0 Bytes (0x0)
size : 0xFE byte (0x0)
mem_usage : registers
protection :
Chip identification register 1.
address_offset : 0x0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIP_ID1 : First character of device type 2632 in ASCII.
bits : 0 - 7 (8 bit)
access : read-only
address_offset : 0x10 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIP_SWC :
bits : 0 - 3 (4 bit)
access : read-only
address_offset : 0x14 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIP_REVISION :
bits : 0 - 7 (8 bit)
access : read-only
Chip identification register 2.
address_offset : 0x4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIP_ID2 : Second character of device type 2632 in ASCII.
bits : 0 - 7 (8 bit)
access : read-only
Chip identification register 3.
address_offset : 0x8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIP_ID3 : Third character of device type 2632 in ASCII.
bits : 0 - 7 (8 bit)
access : read-only
Chip identification register 4.
address_offset : 0xC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIP_ID4 : Fourth character of device type 2632 in ASCII.
bits : 0 - 7 (8 bit)
access : read-only
address_offset : 0xF8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIP_LAYOUT_REVISION :
bits : 0 - 7 (8 bit)
access : read-only
address_offset : 0xFC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CHIP_METAL_OPTION :
bits : 0 - 3 (4 bit)
access : read-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.