\n
address_offset : 0x0 Bytes (0x0)
size : 0x1C byte (0x0)
mem_usage : registers
protection :
address_offset : 0x24 Bytes (0x0)
size : 0x48 byte (0x0)
mem_usage : registers
protection :
address_offset : 0x74 Bytes (0x0)
size : 0x58 byte (0x0)
mem_usage : registers
protection :
address_offset : 0xF0 Bytes (0x0)
size : 0x4 byte (0x0)
mem_usage : registers
protection :
address_offset : 0x100 Bytes (0x0)
size : 0x1C byte (0x0)
mem_usage : registers
protection :
address_offset : 0x120 Bytes (0x0)
size : 0x18 byte (0x0)
mem_usage : registers
protection :
address_offset : 0x140 Bytes (0x0)
size : 0x20 byte (0x0)
mem_usage : registers
protection :
address_offset : 0x200 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection :
Peripheral Non-secure Attribution Set Register0 (0x4000_0000~0x4001_FFFF)
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
USBH : Set USBH to Non-secure State
Write 1 to set USBH to non-secure state.
bits : 9 - 9 (1 bit)
access : read-write
Enumeration:
#0 : 0
USBH is a secure module (default)
#1 : 1
USBH is a non-secure module
End of enumeration elements list.
SDH0 : Set SDH0 to Non-secure State
Write 1 to set SDH0 to non-secure state.
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
SDH0 is a secure module (default)
#1 : 1
SDH0 is a non-secure module
End of enumeration elements list.
EBI : Set EBI to Non-secure State
Write 1 to set EBI to non-secure state.
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
EBI is a secure module (default)
#1 : 1
EBI is a non-secure module
End of enumeration elements list.
PDMA1 : Set PDMA1 to Non-secure State
Write 1 to set PDMA1 to non-secure state.
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
PDMA1 is a secure module (default)
#1 : 1
PDMA1 is a non-secure module
End of enumeration elements list.
Peripheral Non-secure Attribution Set Register4 (0x4008_0000~0x4009_FFFF)
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
I2C0 : Set I2C0 to Non-secure State
Write 1 to set I2C0 to non-secure state.
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
I2C0 is a secure module (default)
#1 : 1
I2C0 is a non-secure module
End of enumeration elements list.
I2C1 : Set I2C1 to Non-secure State
Write 1 to set I2C1 to non-secure state.
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
I2C1 is a secure module (default)
#1 : 1
I2C1 is a non-secure module
End of enumeration elements list.
I2C2 : Set I2C2 to Non-secure State
Write 1 to set I2C2 to non-secure state.
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
I2C2 is a secure module (default)
#1 : 1
I2C2 is a non-secure module
End of enumeration elements list.
SC0 : Set SC0 to Non-secure State
Write 1 to set SC0 to non-secure state.
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
SC0 is a secure module (default)
#1 : 1
SC0 is a non-secure module
End of enumeration elements list.
SC1 : Set SC1 to Non-secure State
Write 1 to set SC1 to non-secure state.
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
SC1 is a secure module (default)
#1 : 1
SC1 is a non-secure module
End of enumeration elements list.
SC2 : Set SC2 to Non-secure State
Write 1 to set SC2 to non-secure state.
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
SC2 is a secure module (default)
#1 : 1
SC2 is a non-secure module
End of enumeration elements list.
Peripheral Non-privileged Attribution Set Register0 (0x4000_0000~0x4001_FFFF)
address_offset : 0x100 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SYS : Set SYS to Non-privileged State
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
SYS is a privileged module (default)
#1 : 1
SYS is a non-privileged module
End of enumeration elements list.
PDMA0 : Set PDMA0 to Non-privileged State
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
PDMA0 is a privileged module (default)
#1 : 1
PDMA0 is a non-privileged module
End of enumeration elements list.
USBH : Set USBH to Non-privileged State
bits : 9 - 9 (1 bit)
access : read-write
Enumeration:
#0 : 0
USBH is a privileged module (default)
#1 : 1
USBH is a non-privileged module
End of enumeration elements list.
FMC : Set FMC to Non-privileged State
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
FMC is a privileged module (default)
#1 : 1
FMC is a non-privileged module
End of enumeration elements list.
SDH0 : Set SDH0 to Non-privileged State
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
SDH0 is a privileged module (default)
#1 : 1
SDH0 is a non-privileged module
End of enumeration elements list.
EBI : Set EBI to Non-privileged State
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
EBI is a privileged module (default)
#1 : 1
EBI is a non-privileged module
End of enumeration elements list.
PDMA1 : Set PDMA1 to Non-privileged State
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
PDMA1 is a privileged module (default)
#1 : 1
PDMA1 is a non-privileged module
End of enumeration elements list.
Peripheral Non-privileged Attribution Set Register1 (0x4002_0000~0x4003_FFFF)
address_offset : 0x104 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCU : Set SCU to Non-privileged State
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
SCU is a privileged module (default)
#1 : 1
SCU is a non-privileged module
End of enumeration elements list.
CRC : Set CRC to Non-privileged State
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
CRC is a privileged module (default)
#1 : 1
CRC is a non-privileged module
End of enumeration elements list.
CRPT : Set CRPT to Non-privileged State
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
CRPT is a privileged module (default)
#1 : 1
CRPT is a non-privileged module
End of enumeration elements list.
KS : Set KS to Non-privileged State
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
#0 : 0
KS is a privileged module (default)
#1 : 1
KS is a non-privileged module
End of enumeration elements list.
Peripheral Non-privileged Attribution Set Register2 (0x4004_0000~0x4005_FFFF)
address_offset : 0x108 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WDT : Set WDT to Non-privileged State
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
WDT is a privileged module (default)
#1 : 1
WDT is a non-privileged module
End of enumeration elements list.
RTC : Set RTC to Non-privileged State
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
RTC is a privileged module (default)
#1 : 1
RTC is a non-privileged module
End of enumeration elements list.
EWDT : Set EWDT to Non-privileged State
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
EWDT is a privileged module (default)
#1 : 1
EWDT is a non-privileged module
End of enumeration elements list.
EADC : Set EADC to Non-privileged State
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
EADC is a privileged module (default)
#1 : 1
EADC is a non-privileged module
End of enumeration elements list.
ACMP01 : Set ACMP01 to Non-privileged State
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
ACMP0, ACMP1 are privileged modules (default)
#1 : 1
ACMP0, ACMP1 are non-privileged modules
End of enumeration elements list.
DAC : Set DAC to Non-privileged State
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
DAC is a privileged module (default)
#1 : 1
DAC is a non-privileged module
End of enumeration elements list.
I2S0 : Set I2S0 to Non-privileged State
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
I2S0 is a privileged module (default)
#1 : 1
I2S0 is a non-privileged module
End of enumeration elements list.
OTG : Set OTG to Non-privileged State
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
OTG is a privileged module (default)
#1 : 1
OTG is a non-privileged module
End of enumeration elements list.
TMR01 : Set TMR01 to Non-privileged State
bits : 14 - 16 (3 bit)
access : read-write
Enumeration:
0 : 0
TMR01 is a privileged module (default)
1 : 1
TMR01 is a non-privileged module
End of enumeration elements list.
TMR23 : Set TMR23 to Non-privileged State
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
TMR23 is a privileged module (default)
#1 : 1
TMR23 is a non-privileged module
End of enumeration elements list.
TMR45 : Set TMR45 to Non-privileged State
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
TMR45 is a privileged module (default)
#1 : 1
TMR45 is a non-privileged module
End of enumeration elements list.
EPWM0 : Set EPWM0 to Non-privileged State
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
EPWM0 is a privileged module (default)
#1 : 1
EPWM0 is a non-privileged module
End of enumeration elements list.
EPWM1 : Set EPWM1 to Non-privileged State
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
EPWM1 is a privileged module (default)
#1 : 1
EPWM1 is a non-privileged module
End of enumeration elements list.
BPWM0 : Set BPWM0 to Non-privileged State
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
BPWM0 is a privileged module (default)
#1 : 1
BPWM0 is a non-privileged module
End of enumeration elements list.
BPWM1 : Set BPWM1 to Non-privileged State
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
BPWM1 is a privileged module (default)
#1 : 1
BPWM1 is a non-privileged module
End of enumeration elements list.
Peripheral Non-privileged Attribution Set Register3 (0x4006_0000~0x4007_FFFF)
address_offset : 0x10C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
QSPI0 : Set QSPI0 to Non-privileged State
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
QSPI0 is a privileged module (default)
#1 : 1
QSPI0 is a non-privileged module
End of enumeration elements list.
SPI0 : Set SPI0 to Non-privileged State
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
SPI0 is a privileged module (default)
#1 : 1
SPI0 is a non-privileged module
End of enumeration elements list.
SPI1 : Set SPI1 to Non-privileged State
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
SPI1 is a privileged module (default)
#1 : 1
SPI1 is a non-privileged module
End of enumeration elements list.
SPI2 : Set SPI2 to Non-privileged State
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
SPI2 is a privileged module (default)
#1 : 1
SPI2 is a non-privileged module
End of enumeration elements list.
SPI3 : Set SPI3 to Non-privileged State
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
SPI3 is a privileged module (default)
#1 : 1
SPI3 is a non-privileged module
End of enumeration elements list.
UART0 : Set UART0 to Non-privileged State
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART0 is a privileged module (default)
#1 : 1
UART0 is a non-privileged module
End of enumeration elements list.
UART1 : Set UART1 to Non-privileged State
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART1 is a privileged module (default)
#1 : 1
UART1 is a non-privileged module
End of enumeration elements list.
UART2 : Set UART2 to Non-privileged State
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART2 is a privileged module (default)
#1 : 1
UART2 is a non-privileged module
End of enumeration elements list.
UART3 : Set UART3 to Non-privileged State
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART3 is a privileged module (default)
#1 : 1
UART3 is a non-privileged module
End of enumeration elements list.
UART4 : Set UART4 to Non-privileged State
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART4 is a privileged module (default)
#1 : 1
UART4 is a non-privileged module
End of enumeration elements list.
UART5 : Set UART5 to Non-privileged State
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART5 is a privileged module (default)
#1 : 1
UART5 is a non-privileged module
End of enumeration elements list.
Peripheral Non-privileged Attribution Set Register4 (0x4008_0000~0x4009_FFFF)
address_offset : 0x110 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
I2C0 : Set I2C0 to Non-privileged State
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
I2C0 is a privileged module (default)
#1 : 1
I2C0 is a non-privileged module
End of enumeration elements list.
I2C1 : Set I2C1 to Non-privileged State
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
I2C1 is a privileged module (default)
#1 : 1
I2C1 is a non-privileged module
End of enumeration elements list.
I2C2 : Set I2C2 to Non-privileged State
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
I2C2 is a privileged module (default)
#1 : 1
I2C2 is a non-privileged module
End of enumeration elements list.
SC0 : Set SC0 to Non-privileged State
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
SC0 is a privileged module (default)
#1 : 1
SC0 is a non-privileged module
End of enumeration elements list.
SC1 : Set SC1 to Non-privileged State
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
SC1 is a privileged module (default)
#1 : 1
SC1 is a non-privileged module
End of enumeration elements list.
SC2 : Set SC2 to Non-privileged State
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
SC2 is a privileged module (default)
#1 : 1
SC2 is a non-privileged module
End of enumeration elements list.
Peripheral Non-privileged Attribution Set Register5 (0x400A_0000~0x400B_FFFF)
address_offset : 0x114 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CAN0 : Set CAN0 to Non-privileged State
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
CAN0 is a privileged module (default)
#1 : 1
CAN0 is a non-privileged module
End of enumeration elements list.
QEI0 : Set QEI0 to Non-privileged State
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
QEI0 is a privileged module (default)
#1 : 1
QEI0 is a non-privileged module
End of enumeration elements list.
QEI1 : Set QEI1 to Non-privileged State
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
QEI1 is a privileged module (default)
#1 : 1
QEI1 is a non-privileged module
End of enumeration elements list.
ECAP0 : Set ECAP0 to Non-privileged State
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
ECAP0 is a privileged module (default)
#1 : 1
ECAP0 is a non-privileged module
End of enumeration elements list.
ECAP1 : Set ECAP1 to Non-privileged State
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
#0 : 0
ECAP1 is a privileged module (default)
#1 : 1
ECAP1 is a non-privileged module
End of enumeration elements list.
TRNG : Set TRNG to Non-privileged State
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
TRNG is a privileged module (default)
#1 : 1
TRNG is a non-privileged module
End of enumeration elements list.
LCD : Set LCD to Non-privileged State
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
LCD is a privileged module (default)
#1 : 1
LCD is a non-privileged module
End of enumeration elements list.
TAMPER : Set TAMPER to Non-privileged State
bits : 29 - 29 (1 bit)
access : read-write
Enumeration:
#0 : 0
TAMPER is a privileged module (default)
#1 : 1
TAMPER is a non-privileged module
End of enumeration elements list.
Peripheral Non-privileged Attribution Set Register6 (0x400C_0000~0x400D_FFFF)
address_offset : 0x118 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
USBD : Set USBD to Non-privileged State
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
USBD is a privileged module (default)
#1 : 1
USBD is a non-privileged module
End of enumeration elements list.
USCI0 : Set USCI0 to Non-privileged State
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
USCI0 is a privileged module (default)
#1 : 1
USCI0 is a non-privileged module
End of enumeration elements list.
USCI1 : Set USCI1 to Non-privileged State
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
USCI1 is a privileged module (default)
#1 : 1
USCI1 is a non-privileged module
End of enumeration elements list.
I/O Non-privileged Attribution Set Register
address_offset : 0x120 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PA : Set GPIO Port a to Non-privileged State
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
GPIO port A is privileged (default)
#1 : 1
GPIO port A is non-privileged
End of enumeration elements list.
PB : Set GPIO Port B to Non-privileged State
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
GPIO port B is privileged (default)
#1 : 1
GPIO port B is non-privileged
End of enumeration elements list.
PC : Set GPIO Port C to Non-privileged State
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
GPIO port C is privileged (default)
#1 : 1
GPIO port C is non-privileged
End of enumeration elements list.
PD : Set GPIO Port D to Non-privileged State
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
GPIO port D is privileged (default)
#1 : 1
GPIO port D is non-privileged
End of enumeration elements list.
PE : Set GPIO Port E to Non-privileged State
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
GPIO port E is privileged (default)
#1 : 1
GPIO port E is non-privileged
End of enumeration elements list.
PF : Set GPIO Port F to Non-privileged State
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
GPIO port F is privileged (default)
#1 : 1
GPIO port F is non-privileged
End of enumeration elements list.
PG : Set GPIO Port G to Non-privileged State
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#0 : 0
GPIO port G is privileged (default)
#1 : 1
GPIO port G is non-privileged
End of enumeration elements list.
PH : Set GPIO Port H to Non-privileged State
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
GPIO port H is privileged (default)
#1 : 1
GPIO port H is non-privileged
End of enumeration elements list.
SRAM Non-privileged Attribution Set Register
address_offset : 0x124 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SECn : Set SRAM Section n to Non-privileged State
Size per section is 16 Kbytes.
Secure SRAM section n is 0x2000_0000+0x4000*n to 0x2000_0000+0x4000*(n+1)-0x1
Non-secure SRAM section n is 0x3000_0000+0x4000*n to 0x3000_0000+0x4000*(n+1)-0x1
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
SRAM Section n is privileged (default)
1 : 1
SRAM Section n is non-privileged
End of enumeration elements list.
Other Memory Non-privileged Attribution Set Register
address_offset : 0x128 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FLASH : Set Flash to Non-privileged State
Set the privileged state of memory ranging from 0x0000_0000 to 0x1FFF_FFFF.
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Flash is set to privileged (default)
#1 : 1
Flash is set to non-privileged
End of enumeration elements list.
EXTMEM : Set External Memory (EBI Memory) to Non-privileged State
Set the privileged state of memory ranging from 0x6000_0000 to 0x7FFF_FFFF.
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
External Memory is set to privileged (default)
#1 : 1
External Memory is set to non-privileged
End of enumeration elements list.
Privileged Violation Interrupt Enable Register
address_offset : 0x12C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
APB0IEN : APB0 Privileged Violation Interrupt Enable Bit
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of APB0 Disabled
#1 : 1
Interrupt triggered from privileged violation of APB0 Enabled
End of enumeration elements list.
APB1IEN : APB1 Privileged Violation Interrupt Enable Bit
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of APB1 Disabled
#1 : 1
Interrupt triggered from privileged violation of APB1 Enabled
End of enumeration elements list.
GPIOIEN : GPIO Privileged Violation Interrupt Enable Bit
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of GPIO Disabled
#1 : 1
Interrupt triggered from privileged violation of GPIO Enabled
End of enumeration elements list.
EBIIEN : EBI Privileged Violation Interrupt Enable Bit
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of EBI Disabled
#1 : 1
Interrupt triggered from privileged violation of EBI Enabled
End of enumeration elements list.
USBHIEN : USBH Privileged Violation Interrupt Enable Bit
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of USB host Disabled
#1 : 1
Interrupt triggered from privileged violation of USB host Enabled
End of enumeration elements list.
CRCIEN : CRC Privileged Violation Interrupt Enable Bit
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of CRC Disabled
#1 : 1
Interrupt triggered from privileged violation of CRC Enabled
End of enumeration elements list.
SDH0IEN : SDH0 Privileged Violation Interrupt Enable Bit
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of SD host 0 Disabled
#1 : 1
Interrupt triggered from privileged violation of SD host 0 Enabled
End of enumeration elements list.
PDMA0IEN : PDMA0 Privileged Violation Interrupt Enable Bit
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of PDMA0 Disabled
#1 : 1
Interrupt triggered from privileged violation of PDMA0 Enabled
End of enumeration elements list.
PDMA1IEN : PDMA1 Privileged Violation Interrupt Enable Bit
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of PDMA1 Disabled
#1 : 1
Interrupt triggered from privileged violation of PDMA1 Enabled
End of enumeration elements list.
SRAM0IEN : SRAM Bank 0 Privileged Violation Interrupt Enable Bit
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of SRAM bank0 Disabled
#1 : 1
Interrupt triggered from privileged violation of SRAM bank0 Enabled
End of enumeration elements list.
SRAM1IEN : SRAM Bank 1 Privileged Violation Interrupt Enable Bit
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of SRAM bank1 Disabled
#1 : 1
Interrupt triggered from privileged violation of SRAM bank1 Enabled
End of enumeration elements list.
FMCIEN : FMC Privileged Violation Interrupt Enable Bit
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of FMC Disabled
#1 : 1
Interrupt triggered from privileged violation of FMC Enabled
End of enumeration elements list.
FLASHIEN : FLASH Privileged Violation Interrupt Enable Bit
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of Flash data Disabled
#1 : 1
Interrupt triggered from privileged violation of Flash data Enabled
End of enumeration elements list.
SCUIEN : SCU Privileged Violation Interrupt Enable Bit
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of SCU Disabled
#1 : 1
Interrupt triggered from privileged violation of SCU Enabled
End of enumeration elements list.
SYSIEN : SYS Privileged Violation Interrupt Enable Bit
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of system manager Disabled
#1 : 1
Interrupt triggered from privileged violation of system manager Enabled
End of enumeration elements list.
CRPTIEN : CRPT Privileged Violation Interrupt Enable Bit
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of crypto Disabled
#1 : 1
Interrupt triggered from privileged violation of crypto Enabled
End of enumeration elements list.
KSIEN : KS Privileged Violation Interrupt Enable Bit
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of keystore Disabled
#1 : 1
Interrupt triggered from privileged violation of keystore Enabled
End of enumeration elements list.
SRAM2IEN : SRAM2 Privileged Violation Interrupt Enable Bit
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from privileged violation of SRAM2 Disabled
#1 : 1
Interrupt triggered from privileged violation of SRAM2 Enabled
End of enumeration elements list.
Privileged Violation Interrupt Status Register
address_offset : 0x130 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
APB0IF : APB0 Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
No APB0 violation interrupt event
#1 : 1
There is APB0 violation interrupt event
End of enumeration elements list.
APB1IF : APB1 Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
No APB1 violation interrupt event
#1 : 1
There is APB1 violation interrupt event
End of enumeration elements list.
GPIOIF : GPIO Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
No GPIO violation interrupt event
#1 : 1
There is GPIO violation interrupt event
End of enumeration elements list.
EBIIF : EBI Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
No EBI violation interrupt event
#1 : 1
There is EBI violation interrupt event
End of enumeration elements list.
USBHIF : USBH Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#0 : 0
No USBH violation interrupt event
#1 : 1
There is USBH violation interrupt event
End of enumeration elements list.
CRCIF : CRC Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
No CRC violation interrupt event
#1 : 1
There is CRC violation interrupt event
End of enumeration elements list.
SDH0IF : SDH0 Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SDH0 violation interrupt event
#1 : 1
There is SDH0 violation interrupt event
End of enumeration elements list.
PDMA0IF : PDMA0 Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#0 : 0
No PDMA0 violation interrupt event
#1 : 1
There is PDMA0 violation interrupt event
End of enumeration elements list.
PDMA1IF : PDMA1 Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
#0 : 0
No PDMA1 violation interrupt event
#1 : 1
There is PDMA1 violation interrupt event
End of enumeration elements list.
SRAM0IF : SRAM0 Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SRAM0 violation interrupt event
#1 : 1
There is SRAM0 violation interrupt event
End of enumeration elements list.
SRAM1IF : SRAM Bank 1 Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SRAM1 violation interrupt event
#1 : 1
There is SRAM1 violation interrupt event
End of enumeration elements list.
FMCIF : FMC Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#0 : 0
No FMC violation interrupt event
#1 : 1
There is FMC violation interrupt event
End of enumeration elements list.
FLASHIF : FLASH Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
No FLASH violation interrupt event
#1 : 1
There is FLASH violation interrupt event
End of enumeration elements list.
SCUIF : SCU Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SCU violation interrupt event
#1 : 1
There is SCU violation interrupt event
End of enumeration elements list.
SYSIF : SYS Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SYS violation interrupt event
#1 : 1
There is SYS violation interrupt event
End of enumeration elements list.
CRPTIF : CRPT Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
No CRPT violation interrupt event
#1 : 1
There is CRPT violation interrupt event
End of enumeration elements list.
KSIF : KS Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
#0 : 0
No KS violation interrupt event
#1 : 1
There is KS violation interrupt event
End of enumeration elements list.
SRAM2IF : SRAM Bank 2 Privileged Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SRAM Bank 2 violation interrupt event
#1 : 1
There is SRAM Bank 2 violation interrupt event
End of enumeration elements list.
Security Configuration Write Protection Register
address_offset : 0x134 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
LOCK : Enable Write Protection Lock Bit (Write One Only)
Note: This bit cannot be cleared to 0 without a system-level reset after set to one.
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Write protection lock Disabled
#1 : 1
Write protection Enabled and locked
End of enumeration elements list.
WVCODE : Write Verify Code
Read operation:
Reserved, all zeros.
Write operation:
bits : 16 - 31 (16 bit)
access : read-write
Enumeration:
0x475a : 18266
The write verify code, 0x475A, is needed to do a valid write to SCU_SCWP
End of enumeration elements list.
Peripheral Non-secure Attribution Set Register5 (0x400A_0000~0x400B_FFFF)
address_offset : 0x14 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CAN0 : Set CAN0 to Non-secure State
Write 1 to set CAN0 to non-secure state.
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
CAN0 is a secure module (default)
#1 : 1
CAN0 is a non-secure module
End of enumeration elements list.
QEI0 : Set QEI0 to Non-secure State
Write 1 to set QEI0 to non-secure state.
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
QEI0 is a secure module (default)
#1 : 1
QEI0 is a non-secure module
End of enumeration elements list.
QEI1 : Set QEI1 to Non-secure State
Write 1 to set QEI1 to non-secure state.
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
QEI1 is a secure module (default)
#1 : 1
QEI1 is a non-secure module
End of enumeration elements list.
ECAP0 : Set ECAP0 to Non-secure State
Write 1 to set ECAP0 to non-secure state.
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
ECAP0 is a secure module (default)
#1 : 1
ECAP0 is a non-secure module
End of enumeration elements list.
ECAP1 : Set ECAP1 to Non-secure State
Write 1 to set ECAP1 to non-secure state.
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
#0 : 0
ECAP1 is a secure module (default)
#1 : 1
ECAP1 is a non-secure module
End of enumeration elements list.
TRNG : Set TRNG to Non-secure State
Write 1 to set TRNG to non-secure state.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
TRNG is a secure module (default)
#1 : 1
TRNG is a non-secure module
End of enumeration elements list.
LCD : Set LCD to Non-secure State
Write 1 to set LCD to non-secure state.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
LCD is a secure module (default)
#1 : 1
LCD is a non-secure module
End of enumeration elements list.
I/O Non-secure Attribution Set Register0
address_offset : 0x140 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PA : Set GPIO Port A to Non-secure State
Write 1 to set PA to non-secure state. Each bit configures one pin in GPIO port A.
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
GPIO port A is secure (default)
1 : 1
GPIO port A is non-secure
End of enumeration elements list.
I/O Non-secure Attribution Set Register1
address_offset : 0x144 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PB : Set GPIO Port B to Non-secure State
Write 1 to set PB to non-secure state. Each bit configures one pin in GPIO port B.
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
GPIO port B is secure (default)
1 : 1
GPIO port B is non-secure
End of enumeration elements list.
I/O Non-secure Attribution Set Register2
address_offset : 0x148 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PC : Set GPIO Port C to Non-secure State
Write 1 to set PC to non-secure state. Each bit configures one pin in GPIO port C.
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
GPIO port C is secure (default)
1 : 1
GPIO port C is non-secure
End of enumeration elements list.
I/O Non-secure Attribution Set Register3
address_offset : 0x14C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PD : Set GPIO Port D to Non-secure State
Write 1 to set PD to non-secure state. Each bit configures one pin in GPIO port D.
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
GPIO port D is secure (default)
1 : 1
GPIO port D is non-secure
End of enumeration elements list.
I/O Non-secure Attribution Set Register4
address_offset : 0x150 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PE : Set GPIO Port E to Non-secure State
Write 1 to set PE to non-secure state. Each bit configures one pin in GPIO port E.
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
GPIO port E is secure (default)
1 : 1
GPIO port E is non-secure
End of enumeration elements list.
I/O Non-secure Attribution Set Register5
address_offset : 0x154 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PF : Set GPIO Port F to Non-secure State
Write 1 to set PF to non-secure state. Each bit configures one pin in GPIO port F.
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
GPIO port F is secure (default)
1 : 1
GPIO port F is non-secure
End of enumeration elements list.
I/O Non-secure Attribution Set Register6
address_offset : 0x158 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PG : Set GPIO Port G to Non-secure State
Write 1 to set PG to non-secure state. Each bit configures one pin in GPIO port G.
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
GPIO port G is secure (default)
1 : 1
GPIO port G is non-secure
End of enumeration elements list.
I/O Non-secure Attribution Set Register7
address_offset : 0x15C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PH : Set GPIO Port H to Non-secure State
Write 1 to set PH to non-secure state. Each bit configures one pin in GPIO port H.
bits : 0 - 15 (16 bit)
access : read-write
Enumeration:
0 : 0
GPIO port H is secure (default)
1 : 1
GPIO port H is non-secure
End of enumeration elements list.
Peripheral Non-secure Attribution Set Register6 (0x400C_0000~0x400D_FFFF)
address_offset : 0x18 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
USBD : Set USBD to Non-secure State
Write 1 to set USBD to non-secure state.
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
USBD is a secure module (default)
#1 : 1
USBD is a non-secure module
End of enumeration elements list.
USCI0 : Set USCI0 to Non-secure State
Write 1 to set USCI0 to non-secure state.
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
USCI0 is a secure module (default)
#1 : 1
USCI0 is a non-secure module
End of enumeration elements list.
USCI1 : Set USCI1 to Non-secure State
Write 1 to set USCI1 to non-secure state.
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
USCI1 is a secure module (default)
#1 : 1
USCI1 is a non-secure module
End of enumeration elements list.
Non-secure State Monitor Control Register
address_offset : 0x200 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRESCALE : Pre-scale Value of Non-secure State Monitor Counter
bits : 0 - 7 (8 bit)
access : read-write
Enumeration:
0 : 0
Counter Disabled
End of enumeration elements list.
NSMIEN : Non-secure State Monitor Interrupt Enable Bit
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
Non-secure state monitor interrupt Disabled
#1 : 1
Non-secure state monitor interrupt Enabled
End of enumeration elements list.
AUTORLD : Auto Reload Non-secure State Monitor Counter When CURRNS Changing to 1
bits : 9 - 9 (1 bit)
access : read-write
Enumeration:
#0 : 0
Disable clearing non-secure state monitor counter automatically (default)
#1 : 1
Enable clearing non-secure state monitor counter automatically when the core processor changes from secure state to non-secure state
End of enumeration elements list.
TMRMOD : Non-secure Monitor Mode Enable Bit
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#0 : 0
Monitor mode. The counter will count down when the core processor is in non-secure state. (default)
#1 : 1
Free-counting mode. The counter will keep counting no matter the core processor is in secure or non-secure state
End of enumeration elements list.
IDLEON : Monitor Counter Keep Counting When the Chip Is in Idle Mode Enable Bit
Note: In monitor mode, the counter is always halted when the core processor is in secure state.
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
The counter will be halted when the chip is in idle mode
#1 : 1
The counter will keep counting when the chip is in idle mode. (default)
End of enumeration elements list.
DBGON : Monitor Counter Keep Counting When the Chip Is in Debug Mode Enable Bit
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
The counter will be halted when the core processor is halted by ICE. (default)
#1 : 1
The counter will keep counting when the core processor is halted by ICE
End of enumeration elements list.
Non-secure State Monitor Reload Value Register
address_offset : 0x204 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RELOAD : Reload Value for Non-secure State Monitor Counter
The RELOAD value will be reloaded to the counter whenever the counter counts down to 0.
bits : 0 - 23 (24 bit)
access : read-write
Non-secure State Monitor Counter Value Register
address_offset : 0x208 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
VALUE : Counter Value of Non-secure State Monitor Counter
A write of any value clears the VALUE to 0 and also clears NSMIF.
bits : 0 - 23 (24 bit)
access : read-write
Non-secure State Monitor Status Register
address_offset : 0x20C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CURRNS : Current Core Processor Secure/Non-secure State (Read Only)
Note: This bit can be used to monitor the current secure/non-secure state of the core processor, even if the non-secure state monitor counter is disabled.
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 0
Core processor is in secure state
#1 : 1
Core processor is in non-secure state
End of enumeration elements list.
NSMIF : Non-secure State Monitor Interrupt Flag
Note: This bit is cleared by writing 1.
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Counter does not count down to 0 since the last NSMIF has been cleared
#1 : 1
Counter counts down to 0
End of enumeration elements list.
SRAM Non-secure Attribution Set Register
address_offset : 0x24 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SECn : Set SRAM Section n to Non-secure State
Write 1 to set SRAM section n to non-secure state. Write 0 is ignored.
Size per section is 16 Kbytes.
Secure SRAM section n is 0x2000_0000+0x4000*n to 0x2000_0000+0x4000*(n+1)-0x1
Non-secure SRAM section n is 0x3000_0000+0x4000*n to 0x3000_0000+0x4000*(n+1)-0x1
bits : 0 - 14 (15 bit)
access : read-write
Enumeration:
0 : 0
SRAM Section n is secure (default)
1 : 1
SRAM Section n is non-secure
End of enumeration elements list.
Flash Non-secure Boundary Address Register
address_offset : 0x28 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
FNSADDR : Flash Non-secure Boundary Address
Indicate the base address of Non-secure region set in user configuration. Refer to FMC section for more details.
bits : 0 - 31 (32 bit)
access : read-only
Security Violation Interrupt Enable Register
address_offset : 0x2C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
APB0IEN : APB0 Security Violation Interrupt Enable Bit
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of APB0 Disabled
#1 : 1
Interrupt triggered from security violation of APB0 Enabled
End of enumeration elements list.
APB1IEN : APB1 Security Violation Interrupt Enable Bit
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of APB1 Disabled
#1 : 1
Interrupt triggered from security violation of APB1 Enabled
End of enumeration elements list.
GPIOIEN : GPIO Security Violation Interrupt Enable Bit
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of GPIO Disabled
#1 : 1
Interrupt triggered from security violation of GPIO Enabled
End of enumeration elements list.
EBIIEN : EBI Security Violation Interrupt Enable Bit
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of EBI Disabled
#1 : 1
Interrupt triggered from security violation of EBI Enabled
End of enumeration elements list.
USBHIEN : USBH Security Violation Interrupt Enable Bit
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of USB host Disabled
#1 : 1
Interrupt triggered from security violation of USB host Enabled
End of enumeration elements list.
CRCIEN : CRC Security Violation Interrupt Enable Bit
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of CRC Disabled
#1 : 1
Interrupt triggered from security violation of CRC Enabled
End of enumeration elements list.
SDH0IEN : SDH0 Security Violation Interrupt Enable Bit
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of SD host 0 Disabled
#1 : 1
Interrupt triggered from security violation of SD host 0 Enabled
End of enumeration elements list.
PDMA0IEN : PDMA0 Security Violation Interrupt Enable Bit
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of PDMA0 Disabled
#1 : 1
Interrupt triggered from security violation of PDMA0 Enabled
End of enumeration elements list.
PDMA1IEN : PDMA1 Security Violation Interrupt Enable Bit
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of PDMA1 Disabled
#1 : 1
Interrupt triggered from security violation of PDMA1 Enabled
End of enumeration elements list.
SRAM0IEN : SRAM Bank 0 Security Violation Interrupt Enable Bit
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of SRAM bank0 Disabled
#1 : 1
Interrupt triggered from security violation of SRAM bank0 Enabled
End of enumeration elements list.
SRAM1IEN : SRAM Bank 1 Security Violation Interrupt Enable Bit
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of SRAM bank1 Disabled
#1 : 1
Interrupt triggered from security violation of SRAM bank1 Enabled
End of enumeration elements list.
FMCIEN : FMC Security Violation Interrupt Enable Bit
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of FMC Disabled
#1 : 1
Interrupt triggered from security violation of FMC Enabled
End of enumeration elements list.
FLASHIEN : FLASH Security Violation Interrupt Enable Bit
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of Flash data Disabled
#1 : 1
Interrupt triggered from security violation of Flash data Enabled
End of enumeration elements list.
SCUIEN : SCU Security Violation Interrupt Enable Bit
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of SCU Disabled
#1 : 1
Interrupt triggered from security violation of SCU Enabled
End of enumeration elements list.
SYSIEN : SYS Security Violation Interrupt Enable Bit
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of system manager Disabled
#1 : 1
Interrupt triggered from security violation of system manager Enabled
End of enumeration elements list.
CRPTIEN : CRPT Security Violation Interrupt Enable Bit
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of crypto Disabled
#1 : 1
Interrupt triggered from security violation of crypto Enabled
End of enumeration elements list.
KSIEN : KS Security Violation Interrupt Enable Bit
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of keystore Disabled
#1 : 1
Interrupt triggered from security violation of keystore Enabled
End of enumeration elements list.
SRAM2IEN : SRAM2 Security Violation Interrupt Enable Bit
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
Interrupt triggered from security violation of SRAM2 Disabled
#1 : 1
Interrupt triggered from security violation of SRAM2 Enabled
End of enumeration elements list.
Security Violation Interrupt Status Register
address_offset : 0x30 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
APB0IF : APB0 Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
No APB0 violation interrupt event
#1 : 1
There is at least a APB0 violation interrupt event
End of enumeration elements list.
APB1IF : APB1 Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
No APB1 violation interrupt event
#1 : 1
There is at least a APB1 violation interrupt event
End of enumeration elements list.
GPIOIF : GPIO Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
No GPIO violation interrupt event
#1 : 1
There is at least a GPIO violation interrupt event
End of enumeration elements list.
EBIIF : EBI Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
No EBI violation interrupt event
#1 : 1
There is at least a EBI violation interrupt event
End of enumeration elements list.
USBHIF : USBH Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 6 - 6 (1 bit)
access : read-write
Enumeration:
#0 : 0
No USBH violation interrupt event
#1 : 1
There is at least a USBH violation interrupt event
End of enumeration elements list.
CRCIF : CRC Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
No CRC violation interrupt event
#1 : 1
There is at least a CRC violation interrupt event
End of enumeration elements list.
SDH0IF : SDH0 Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SDH0 violation interrupt event
#1 : 1
There is at least a SDH0 violation interrupt event
End of enumeration elements list.
PDMA0IF : PDMA0 Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 10 - 10 (1 bit)
access : read-write
Enumeration:
#0 : 0
No PDMA0 violation interrupt event
#1 : 1
There is at least a PDMA0 violation interrupt event
End of enumeration elements list.
PDMA1IF : PDMA1 Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 11 - 11 (1 bit)
access : read-write
Enumeration:
#0 : 0
No PDMA1 violation interrupt event
#1 : 1
There is at least a PDMA1 violation interrupt event
End of enumeration elements list.
SRAM0IF : SRAM Bank 0 Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 12 - 12 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SRAM Bank 0 violation interrupt event
#1 : 1
There is at least a SRAM Bank 0 violation interrupt event
End of enumeration elements list.
SRAM1IF : SRAM Bank 1 Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SRAM Bank 1 violation interrupt event
#1 : 1
There is at least a SRAM Bank 1 violation interrupt event
End of enumeration elements list.
FMCIF : FMC Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 14 - 14 (1 bit)
access : read-write
Enumeration:
#0 : 0
No FMC violation interrupt event
#1 : 1
There is at least a FMC violation interrupt event
End of enumeration elements list.
FLASHIF : FLASH Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 15 - 15 (1 bit)
access : read-write
Enumeration:
#0 : 0
No FLASH violation interrupt event
#1 : 1
There is at least a FLASH violation interrupt event
End of enumeration elements list.
SCUIF : SCU Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SCU violation interrupt event
#1 : 1
There is at least a SCU violation interrupt event
End of enumeration elements list.
SYSIF : SYS Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SYS violation interrupt event
#1 : 1
There is at least a SYS violation interrupt event
End of enumeration elements list.
CRPTIF : CRPT Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
No CRPT violation interrupt event
#1 : 1
There is at least a CRPT violation interrupt event
End of enumeration elements list.
KSIF : KS Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
#0 : 0
No KS violation interrupt event
#1 : 1
There is at least a KS violation interrupt event
End of enumeration elements list.
SRAM2IF : SRAM Bank 2 Security Violation Interrupt Status
Note: Write 1 to clear the interrupt flag.
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
No SRAM Bank 2 violation interrupt event
#1 : 1
There is at least a SRAM Bank 2 violation interrupt event
End of enumeration elements list.
APB0 Security Policy Violation Source
address_offset : 0x34 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
MASTER : Master Violating Security Policy
Indicate which master invokes the security violation.
Others is undefined.
bits : 0 - 3 (4 bit)
access : read-only
Enumeration:
0x0 : 0
core processor
0x3 : 3
PDMA0
0x4 : 4
SDH0
0x5 : 5
CRYPTO
0x6 : 6
USH
0xb : 11
PDMA1
End of enumeration elements list.
APB0 Violation Address
address_offset : 0x38 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
VIOADDR : Violation Address
Indicate the target address of the access, which invokes the security violation.
bits : 0 - 31 (32 bit)
access : read-only
APB1 Security Policy Violation Source
address_offset : 0x3C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Peripheral Non-secure Attribution Set Register1 (0x4002_0000~0x4003_FFFF)
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRC : Set CRC to Non-secure State
Write 1 to set CRC to non-secure state.
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
CRC is a secure module (default)
#1 : 1
CRC is a non-secure module
End of enumeration elements list.
CRPT : Set CRPT to Non-secure State
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
CRPT is a secure module (default)
#1 : 1
CRPT is a non-secure module
End of enumeration elements list.
APB1 Violation Address
address_offset : 0x40 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
GPIO Security Policy Violation Source
address_offset : 0x44 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
GPIO Violation Address
address_offset : 0x48 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EBI Security Policy Violation Source
address_offset : 0x4C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EBI Violation Address
address_offset : 0x50 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
USBH Security Policy Violation Source
address_offset : 0x54 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
USBH Violation Address
address_offset : 0x58 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRC Security Policy Violation Source
address_offset : 0x5C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CRC Violation Address
address_offset : 0x60 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SDH0 Security Policy Violation Source
address_offset : 0x64 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SDH0 Violation Address
address_offset : 0x68 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDMA0 Security Policy Violation Source
address_offset : 0x74 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDMA0 Violation Address
address_offset : 0x78 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PDMA1 Security Policy Violation Source
address_offset : 0x7C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Peripheral Non-secure Attribution Set Register2 (0x4004_0000~0x4005_FFFF)
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EWDT : Set EWDT to Non-secure State
Write 1 to set EWDT to non-secure state.
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
EWDT is a secure module (default)
#1 : 1
EWDT is a non-secure module
End of enumeration elements list.
EADC : Set EADC to Non-secure State
Write 1 to set EADC to non-secure state.
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
EADC is a secure module (default)
#1 : 1
EADC is a non-secure module
End of enumeration elements list.
ACMP01 : Set ACMP01 to Non-secure State
Write 1 to set ACMP0, ACMP1 to non-secure state.
bits : 5 - 5 (1 bit)
access : read-write
Enumeration:
#0 : 0
ACMP0, ACMP1 are secure modules (default)
#1 : 1
ACMP0, ACMP1 are non-secure modules
End of enumeration elements list.
DAC : Set DAC to Non-secure State
Write 1 to set DAC to non-secure state.
bits : 7 - 7 (1 bit)
access : read-write
Enumeration:
#0 : 0
DAC is a secure module (default)
#1 : 1
DAC is a non-secure module
End of enumeration elements list.
I2S0 : Set I2S0 to Non-secure State
Write 1 to set I2S0 to non-secure state.
bits : 8 - 8 (1 bit)
access : read-write
Enumeration:
#0 : 0
I2S0 is a secure module (default)
#1 : 1
I2S0 is a non-secure module
End of enumeration elements list.
OTG : Set OTG to Non-secure State
Write 1 to set OTG to non-secure state.
bits : 13 - 13 (1 bit)
access : read-write
Enumeration:
#0 : 0
OTG is a secure module (default)
#1 : 1
OTG is a non-secure module
End of enumeration elements list.
TMR23 : Set TMR23 to Non-secure State
Write 1 to set TMR23 to non-secure state.
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
TMR23 is a secure module (default)
#1 : 1
TMR23 is a non-secure module
End of enumeration elements list.
TMR45 : Set TMR45 to Non-secure State
Write 1 to set TMR45 to non-secure state.
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
TMR45 is a secure module (default)
#1 : 1
TMR45 is a non-secure module
End of enumeration elements list.
EPWM0 : Set EPWM0 to Non-secure State
Write 1 to set EPWM0 to non-secure state.
bits : 24 - 24 (1 bit)
access : read-write
Enumeration:
#0 : 0
EPWM0 is a secure module (default)
#1 : 1
EPWM0 is a non-secure module
End of enumeration elements list.
EPWM1 : Set EPWM1 to Non-secure State
Write 1 to set EPWM1 to non-secure state.
bits : 25 - 25 (1 bit)
access : read-write
Enumeration:
#0 : 0
EPWM1 is a secure module (default)
#1 : 1
EPWM1 is a non-secure module
End of enumeration elements list.
BPWM0 : Set BPWM0 to Non-secure State
Write 1 to set BPWM0 to non-secure state.
bits : 26 - 26 (1 bit)
access : read-write
Enumeration:
#0 : 0
BPWM0 is a secure module (default)
#1 : 1
BPWM0 is a non-secure module
End of enumeration elements list.
BPWM1 : Set BPWM1 to Non-secure State
Write 1 to set BPWM1 to non-secure state.
bits : 27 - 27 (1 bit)
access : read-write
Enumeration:
#0 : 0
BPWM1 is a secure module (default)
#1 : 1
BPWM1 is a non-secure module
End of enumeration elements list.
PDMA1 Violation Address
address_offset : 0x80 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SRAM0 Security Policy Violation Source
address_offset : 0x84 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SRAM0 Violation Address
address_offset : 0x88 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SRAM1 Security Policy Violation Source
address_offset : 0x8C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SRAM1 Violation Address
address_offset : 0x90 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FMC Security Policy Violation Source
address_offset : 0x94 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FMC Violation Address
address_offset : 0x98 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Flash Security Policy Violation Source
address_offset : 0x9C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Flash Violation Address
address_offset : 0xA0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCU Security Policy Violation Source
address_offset : 0xA4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCU Violation Address
address_offset : 0xA8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
System Security Policy Violation Source
address_offset : 0xAC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
System Violation Address
address_offset : 0xB0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Crypto Security Policy Violation Source
address_offset : 0xB4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Crypto Violation Address
address_offset : 0xB8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
KS Security Policy Violation Source
address_offset : 0xBC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Peripheral Non-secure Attribution Set Register3 (0x4006_0000~0x4007_FFFF)
address_offset : 0xC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
QSPI0 : Set QSPI0 to Non-secure State
Write 1 to set QSPI0 to non-secure state.
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
QSPI0 is a secure module (default)
#1 : 1
QSPI0 is a non-secure module
End of enumeration elements list.
SPI0 : Set SPI0 to Non-secure State
Write 1 to set SPI0 to non-secure state.
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
SPI0 is a secure module (default)
#1 : 1
SPI0 is a non-secure module
End of enumeration elements list.
SPI1 : Set SPI1 to Non-secure State
Write 1 to set SPI1 to non-secure state.
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
SPI1 is a secure module (default)
#1 : 1
SPI1 is a non-secure module
End of enumeration elements list.
SPI2 : Set SPI2 to Non-secure State
Write 1 to set SPI2 to non-secure state.
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
SPI2 is a secure module (default)
#1 : 1
SPI2 is a non-secure module
End of enumeration elements list.
SPI3 : Set SPI3 to Non-secure State
Write 1 to set SPI3 to non-secure state.
bits : 4 - 4 (1 bit)
access : read-write
Enumeration:
#0 : 0
SPI3 is a secure module (default)
#1 : 1
SPI3 is a non-secure module
End of enumeration elements list.
UART0 : Set UART0 to Non-secure State
Write 1 to set UART0 to non-secure state.
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART0 is a secure module (default)
#1 : 1
UART0 is a non-secure module
End of enumeration elements list.
UART1 : Set UART1 to Non-secure State
Write 1 to set UART1 to non-secure state.
bits : 17 - 17 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART1 is a secure module (default)
#1 : 1
UART1 is a non-secure module
End of enumeration elements list.
UART2 : Set UART2 to Non-secure State
Write 1 to set UART2 to non-secure state.
bits : 18 - 18 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART2 is a secure module (default)
#1 : 1
UART2 is a non-secure module
End of enumeration elements list.
UART3 : Set UART3 to Non-secure State
Write 1 to set UART3 to non-secure state.
bits : 19 - 19 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART3 is a secure module (default)
#1 : 1
UART3 is a non-secure module
End of enumeration elements list.
UART4 : Set UART4 to Non-secure State
Write 1 to set UART4 to non-secure state.
bits : 20 - 20 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART4 is a secure module (default)
#1 : 1
UART4 is a non-secure module
End of enumeration elements list.
UART5 : Set UART5 to Non-secure State
Write 1 to set UART5 to non-secure state.
bits : 21 - 21 (1 bit)
access : read-write
Enumeration:
#0 : 0
UART5 is a secure module (default)
#1 : 1
UART5 is a non-secure module
End of enumeration elements list.
KS Violation Address
address_offset : 0xC0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SRAM2 Security Policy Violation Source
address_offset : 0xC4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SRAM2 Violation Address
address_offset : 0xC8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
Shared Information Access Enable Register
address_offset : 0xF0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SCUSIAEN : SCU Shared Information Access Enable Bit
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Non-secure CPU access SCU Shared information Disabled
#1 : 1
Non-secure CPU access SCU Shared information Enabled
End of enumeration elements list.
SYSSIAEN : SYS Shared Information Access Enable Bit
Note: Include clock information.
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Non-secure CPU access SYS Shared information Disabled
#1 : 1
Non-secure CPU access SYS Shared information Enabled
End of enumeration elements list.
FMCSIAEN : FMC Shared Information Access Enable Bit
bits : 2 - 2 (1 bit)
access : read-write
Enumeration:
#0 : 0
Non-secure CPU access FMC Shared information Disabled
#1 : 1
Non-secure CPU access FMC Shared information Enabled
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.