\n
address_offset : 0x0 Bytes (0x0)
size : 0x30 byte (0x0)
mem_usage : registers
protection :
PRNG Interrupt Enable Control Register
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNGIEN : PRNG Interrupt Enable Bit
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
PRNG interrupt Disabled
#1 : 1
PRNG interrupt Enabled
End of enumeration elements list.
PRNG Generated Key0
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEY : Store PRNG Generated Key (Read Only)
The bits store the key that is generated by PRNG.
bits : 0 - 31 (32 bit)
access : read-only
PRNG Generated Key1
address_offset : 0x14 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNG Generated Key2
address_offset : 0x18 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNG Generated Key3
address_offset : 0x1C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNG Generated Key4
address_offset : 0x20 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNG Generated Key5
address_offset : 0x24 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNG Generated Key6
address_offset : 0x28 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNG Generated Key7
address_offset : 0x2C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNG Interrupt Flag
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PRNGIF : PRNG Finish Interrupt Flag
Note: This bit is cleared by writing 1, and it has no effect by writing 0.
bits : 16 - 16 (1 bit)
access : read-write
Enumeration:
#0 : 0
No PRNG interrupt
#1 : 1
PRNG key generation done interrupt
End of enumeration elements list.
PRNG Control Register
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
START : Start PRNG Engine
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Stop PRNG engine
#1 : 1
Generate a new key and store the new key to the register PRNG_KEYx, which will be cleared when the new key is generated
End of enumeration elements list.
SEEDRLD : Reload New Seed for PRNG Engine
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Generating key based on the current seed
#1 : 1
Reload new seed
End of enumeration elements list.
KEYSZ : PRNG Generate Key Size
bits : 2 - 3 (2 bit)
access : read-write
Enumeration:
#00 : 0
64 bits
#01 : 1
128 bits
#10 : 2
192 bits
#11 : 3
256 bits
End of enumeration elements list.
BUSY : PRNG Busy (Read Only)
bits : 8 - 8 (1 bit)
access : read-only
Enumeration:
#0 : 0
PRNG engine is idle
#1 : 1
PRNG engine is generating PRNG_KEYx
End of enumeration elements list.
Seed for PRNG
address_offset : 0xC Bytes (0x0)
size : -1 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
SEED : Seed for PRNG (Write Only)
The bits store the seed for PRNG engine.
bits : 0 - 31 (32 bit)
access : write-only
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.