\n
address_offset : 0x0 Bytes (0x0)
size : 0x2F296 byte (0x0)
mem_usage : registers
protection :
Timer 20 Mode1 Register
address_offset : 0x0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock source edge selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer one-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 20 Bi20ary Cou20ter
address_offset : 0x10 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 22 Mode1 Register
address_offset : 0x100 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock source edge selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer one-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 23 Mode1 Register
address_offset : 0x102 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock source edge selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer one-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 22 Mode2 Register
address_offset : 0x104 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
OUTMD : Output mode
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFEN : Task overflow detection enable
bits : 1 - 2 (2 bit)
access : read-write
DTEN : Dead time insertion
bits : 2 - 4 (3 bit)
access : read-write
ORMDA : Dead time insertion logic (TMnA)
bits : 3 - 6 (4 bit)
access : read-write
ORMDB : Dead time insertion logic (TMnB)
bits : 4 - 8 (5 bit)
access : read-write
SLFCNT : Dead time width auto control enable
bits : 5 - 10 (6 bit)
access : read-write
PXDTA : Output polarity of TMnA
bits : 6 - 12 (7 bit)
access : read-write
PXDTB : Output polarity of TMnB
bits : 7 - 14 (8 bit)
access : read-write
LEBEN : Leading edge blanking setting enable
bits : 8 - 16 (9 bit)
access : read-write
SFTEN : Output shift control enable
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : This bit must be set to 0.
bits : 10 - 20 (11 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 23 Mode2 Register
address_offset : 0x106 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
OUTMD : Output mode
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFEN : Task overflow detection enable
bits : 1 - 2 (2 bit)
access : read-write
DTEN : Dead time insertion
bits : 2 - 4 (3 bit)
access : read-write
ORMDA : Dead time insertion logic (TMnA)
bits : 3 - 6 (4 bit)
access : read-write
ORMDB : Dead time insertion logic (TMnB)
bits : 4 - 8 (5 bit)
access : read-write
SLFCNT : Dead time width auto control enable
bits : 5 - 10 (6 bit)
access : read-write
PXDTA : Output polarity of TMnA
bits : 6 - 12 (7 bit)
access : read-write
PXDTB : Output polarity of TMnB
bits : 7 - 14 (8 bit)
access : read-write
LEBEN : Leading edge blanking setting enable
bits : 8 - 16 (9 bit)
access : read-write
SFTEN : Output shift control enable
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : This bit must be set to 0.
bits : 10 - 20 (11 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 22 Compare/Capture A Mode Register
address_offset : 0x108 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 22 Compare/Capture B Mode Register
address_offset : 0x109 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 23 Compare/Capture A Mode Register
address_offset : 0x10A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 23 Compare/Capture B Mode Register
address_offset : 0x10B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 22 Compare/Capture C Mode Register
address_offset : 0x10C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 23 Compare/Capture C Mode Register
address_offset : 0x10E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 22 Bi22ary Cou22ter
address_offset : 0x110 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 23 Bi23ary Cou23ter
address_offset : 0x112 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 22 Compare/Capture A Register
address_offset : 0x114 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 23 Compare/Capture A Register
address_offset : 0x116 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 22 Compare/Capture B Register
address_offset : 0x11A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 23 Compare/Capture B Register
address_offset : 0x11E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 21 Bi21ary Cou21ter
address_offset : 0x12 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 22 Compare/Capture C Register
address_offset : 0x120 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 23 Compare/Capture C Register
address_offset : 0x122 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 22 Capture A Factor Selectio22 Register
address_offset : 0x124 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 23 Capture A Factor Selectio23 Register
address_offset : 0x126 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 22 Capture B Factor Selectio22 Register
address_offset : 0x128 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 23 Capture B Factor Selectio23 Register
address_offset : 0x12A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 22 Capture C Factor Selectio22 Register
address_offset : 0x12C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 23 Capture C Factor Selectio23 Register
address_offset : 0x12E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 22 Start Trigger Factor Selectio22 Register
address_offset : 0x130 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 23 Start Trigger Factor Selectio23 Register
address_offset : 0x132 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 22 I22terrupt Output Co22trol Register
address_offset : 0x134 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 23 I23terrupt Output Co23trol Register
address_offset : 0x136 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 20 Compare/Capture A Register
address_offset : 0x14 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 22 Pi22 Protectio22 Co22trol Register
address_offset : 0x140 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
PRTASEL : Protection factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTASTCLR : TMnOFFSTR.PRTAST clear operation
bits : 3 - 6 (4 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 4 - 11 (8 bit)
access : read
AOFFA : TMnA pin output protection
bits : 8 - 17 (10 bit)
access : read-write
BOFFA : TMnB pin output protection
bits : 10 - 21 (12 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 23 Pi23 Protectio23 Co23trol Register
address_offset : 0x142 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
PRTASEL : Protection factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTASTCLR : TMnOFFSTR.PRTAST clear operation
bits : 3 - 6 (4 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 4 - 11 (8 bit)
access : read
AOFFA : TMnA pin output protection
bits : 8 - 17 (10 bit)
access : read-write
BOFFA : TMnB pin output protection
bits : 10 - 21 (12 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 22 Pi22 Protectio22 Factor Selectio22 Register
address_offset : 0x144 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PAE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PAE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PAE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PAE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PAE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PAE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PAE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PAE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPAE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PAE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PAE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PAE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APAE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPAE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APAE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPAE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 23 Pi23 Protectio23 Factor Selectio23 Register
address_offset : 0x146 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PAE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PAE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PAE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PAE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PAE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PAE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PAE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PAE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPAE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PAE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PAE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PAE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APAE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPAE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APAE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPAE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 22 Duty Cut/Period Cut Co22trol Register
address_offset : 0x148 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTBEN : Duty cut/period cut enable
bits : 0 - 0 (1 bit)
access : read-write
PRTBMD : Operation selection
bits : 1 - 2 (2 bit)
access : read-write
PRTBSEL : Duty cut/period cut factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTBSTCLR : TMnOFFSTR.PRTBST clear operation
bits : 3 - 6 (4 bit)
access : read-write
PRTBRLS : Return at the end of periodic
bits : 4 - 8 (5 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 5 - 12 (8 bit)
access : read
AOFFB : Duty cut function of TMnA pin output
bits : 8 - 17 (10 bit)
access : read-write
BOFFB : Duty cut function of TMnB pin output
bits : 10 - 21 (12 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 23 Duty Cut/Period Cut Co23trol Register
address_offset : 0x14A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTBEN : Duty cut/period cut enable
bits : 0 - 0 (1 bit)
access : read-write
PRTBMD : Operation selection
bits : 1 - 2 (2 bit)
access : read-write
PRTBSEL : Duty cut/period cut factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTBSTCLR : TMnOFFSTR.PRTBST clear operation
bits : 3 - 6 (4 bit)
access : read-write
PRTBRLS : Return at the end of periodic
bits : 4 - 8 (5 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 5 - 12 (8 bit)
access : read
AOFFB : Duty cut function of TMnA pin output
bits : 8 - 17 (10 bit)
access : read-write
BOFFB : Duty cut function of TMnB pin output
bits : 10 - 21 (12 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 22 Duty Cut/Period Cut Factor Selectio22 Register
address_offset : 0x14C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PBE : Duty cut/period cut factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PBE : Duty cut/period cut factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PBE : Duty cut/period cut factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PBE : Duty cut/period cut factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PBE : Duty cut/period cut factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PBE : Duty cut/period cut factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PBE : Duty cut/period cut factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PBE : Duty cut/period cut factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
CMP0PBE : Duty cut/period cut factor selection by CMP00
bits : 8 - 16 (9 bit)
access : read
CMP1PBE : Duty cut/period cut factor selection by CMP10
bits : 9 - 18 (10 bit)
access : read-write
CMP2PBE : Duty cut/period cut factor selection by CMP20
bits : 10 - 20 (11 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 23 Duty Cut/Period Cut Factor Selectio23 Register
address_offset : 0x14E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PBE : Duty cut/period cut factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PBE : Duty cut/period cut factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PBE : Duty cut/period cut factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PBE : Duty cut/period cut factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PBE : Duty cut/period cut factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PBE : Duty cut/period cut factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PBE : Duty cut/period cut factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PBE : Duty cut/period cut factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
CMP0PBE : Duty cut/period cut factor selection by CMP00
bits : 8 - 16 (9 bit)
access : read
CMP1PBE : Duty cut/period cut factor selection by CMP10
bits : 9 - 18 (10 bit)
access : read-write
CMP2PBE : Duty cut/period cut factor selection by CMP20
bits : 10 - 20 (11 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 22 Dead Time Setti22g Register
address_offset : 0x150 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
DTSTA : Dead time setting of Timer A pin
bits : 0 - 7 (8 bit)
access : read-write
DTSTB : Dead time setting of Timer B pin
bits : 8 - 23 (16 bit)
access : read-write
Timer 23 Dead Time Setti23g Register
address_offset : 0x152 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
DTSTA : Dead time setting of Timer A pin
bits : 0 - 7 (8 bit)
access : read-write
DTSTB : Dead time setting of Timer B pin
bits : 8 - 23 (16 bit)
access : read-write
Timer 22 Output Shift Amou22t Setti22g Register
address_offset : 0x154 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
SFTST : Set the shift amount of timer pin output.
bits : 0 - 15 (16 bit)
access : read-write
Timer 23 Output Shift Amou23t Setti23g Register
address_offset : 0x156 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
SFTST : Set the shift amount of timer pin output.
bits : 0 - 15 (16 bit)
access : read-write
Timer 22 Leadi22g Edge Bla22ki22g Setti22g Register
address_offset : 0x158 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBST : Set the blanking amount.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 23 Leadi23g Edge Bla23ki23g Setti23g Register
address_offset : 0x15A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBST : Set the blanking amount.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 21 Compare/Capture A Register
address_offset : 0x16 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 22 Cou22t Directio22 Status Register
address_offset : 0x160 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 23 Cou23t Directio23 Status Register
address_offset : 0x162 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 22 Pi22 Protectio22 Status Register
address_offset : 0x164 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAST : Pin protection function state
bits : 0 - 0 (1 bit)
access : read
PRTBST : Duty cut function state
bits : 1 - 2 (2 bit)
access : read
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 23 Pi23 Protectio23 Status Register
address_offset : 0x166 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAST : Pin protection function state
bits : 0 - 0 (1 bit)
access : read
PRTBST : Duty cut function state
bits : 1 - 2 (2 bit)
access : read
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 22 Task Overflow Object Selectio22 Register
address_offset : 0x168 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TSKOVFE0 : Set TMnCA as task overflow judgment object.
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFE1 : Set TMnCB as task overflow judgment object.
bits : 1 - 2 (2 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 23 Task Overflow Object Selectio23 Register
address_offset : 0x16A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TSKOVFE0 : Set TMnCA as task overflow judgment object.
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFE1 : Set TMnCB as task overflow judgment object.
bits : 1 - 2 (2 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 20 Compare/Capture B Register
address_offset : 0x1A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 21 Compare/Capture B Register
address_offset : 0x1E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 21 Mode1 Register
address_offset : 0x2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock source edge selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer one-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 20 Compare/Capture C Register
address_offset : 0x20 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 24 Mode1 Register
address_offset : 0x200 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock source edge selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer one-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 25 Mode1 Register
address_offset : 0x202 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock source edge selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer one-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 24 Mode2 Register
address_offset : 0x204 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
OUTMD : Output mode
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFEN : Task overflow detection enable
bits : 1 - 2 (2 bit)
access : read-write
DTEN : Dead time insertion
bits : 2 - 4 (3 bit)
access : read-write
ORMDA : Dead time insertion logic (TMnA)
bits : 3 - 6 (4 bit)
access : read-write
ORMDB : Dead time insertion logic (TMnB)
bits : 4 - 8 (5 bit)
access : read-write
SLFCNT : Dead time width auto control enable
bits : 5 - 10 (6 bit)
access : read-write
PXDTA : Output polarity of TMnA
bits : 6 - 12 (7 bit)
access : read-write
PXDTB : Output polarity of TMnB
bits : 7 - 14 (8 bit)
access : read-write
LEBEN : Leading edge blanking setting enable
bits : 8 - 16 (9 bit)
access : read-write
SFTEN : Output shift control enable
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : This bit must be set to 0.
bits : 10 - 20 (11 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 25 Mode2 Register
address_offset : 0x206 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
OUTMD : Output mode
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFEN : Task overflow detection enable
bits : 1 - 2 (2 bit)
access : read-write
DTEN : Dead time insertion
bits : 2 - 4 (3 bit)
access : read-write
ORMDA : Dead time insertion logic (TMnA)
bits : 3 - 6 (4 bit)
access : read-write
ORMDB : Dead time insertion logic (TMnB)
bits : 4 - 8 (5 bit)
access : read-write
SLFCNT : Dead time width auto control enable
bits : 5 - 10 (6 bit)
access : read-write
PXDTA : Output polarity of TMnA
bits : 6 - 12 (7 bit)
access : read-write
PXDTB : Output polarity of TMnB
bits : 7 - 14 (8 bit)
access : read-write
LEBEN : Leading edge blanking setting enable
bits : 8 - 16 (9 bit)
access : read-write
SFTEN : Output shift control enable
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : This bit must be set to 0.
bits : 10 - 20 (11 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 24 Compare/Capture A Mode Register
address_offset : 0x208 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 24 Compare/Capture B Mode Register
address_offset : 0x209 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 25 Compare/Capture A Mode Register
address_offset : 0x20A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 25 Compare/Capture B Mode Register
address_offset : 0x20B Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 24 Compare/Capture C Mode Register
address_offset : 0x20C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 25 Compare/Capture C Mode Register
address_offset : 0x20E Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 24 Bi24ary Cou24ter
address_offset : 0x210 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 25 Bi25ary Cou25ter
address_offset : 0x212 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 24 Compare/Capture A Register
address_offset : 0x214 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 25 Compare/Capture A Register
address_offset : 0x216 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 24 Compare/Capture B Register
address_offset : 0x21A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 25 Compare/Capture B Register
address_offset : 0x21E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 21 Compare/Capture C Register
address_offset : 0x22 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 24 Compare/Capture C Register
address_offset : 0x220 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 25 Compare/Capture C Register
address_offset : 0x222 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 24 Capture A Factor Selectio24 Register
address_offset : 0x224 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 25 Capture A Factor Selectio25 Register
address_offset : 0x226 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 24 Capture B Factor Selectio24 Register
address_offset : 0x228 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 25 Capture B Factor Selectio25 Register
address_offset : 0x22A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 24 Capture C Factor Selectio24 Register
address_offset : 0x22C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 25 Capture C Factor Selectio25 Register
address_offset : 0x22E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 24 Start Trigger Factor Selectio24 Register
address_offset : 0x230 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 25 Start Trigger Factor Selectio25 Register
address_offset : 0x232 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 24 I24terrupt Output Co24trol Register
address_offset : 0x234 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 25 I25terrupt Output Co25trol Register
address_offset : 0x236 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 20 Capture A Factor Selectio20 Register
address_offset : 0x24 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 24 Pi24 Protectio24 Co24trol Register
address_offset : 0x240 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
PRTASEL : Protection factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTASTCLR : TMnOFFSTR.PRTAST clear operation
bits : 3 - 6 (4 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 4 - 11 (8 bit)
access : read
AOFFA : TMnA pin output protection
bits : 8 - 17 (10 bit)
access : read-write
BOFFA : TMnB pin output protection
bits : 10 - 21 (12 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 25 Pi25 Protectio25 Co25trol Register
address_offset : 0x242 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
PRTASEL : Protection factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTASTCLR : TMnOFFSTR.PRTAST clear operation
bits : 3 - 6 (4 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 4 - 11 (8 bit)
access : read
AOFFA : TMnA pin output protection
bits : 8 - 17 (10 bit)
access : read-write
BOFFA : TMnB pin output protection
bits : 10 - 21 (12 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 24 Pi24 Protectio24 Factor Selectio24 Register
address_offset : 0x244 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PAE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PAE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PAE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PAE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PAE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PAE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PAE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PAE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPAE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PAE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PAE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PAE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APAE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPAE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APAE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPAE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 25 Pi25 Protectio25 Factor Selectio25 Register
address_offset : 0x246 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PAE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PAE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PAE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PAE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PAE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PAE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PAE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PAE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPAE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PAE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PAE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PAE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APAE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPAE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APAE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPAE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 24 Duty Cut/Period Cut Co24trol Register
address_offset : 0x248 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTBEN : Duty cut/period cut enable
bits : 0 - 0 (1 bit)
access : read-write
PRTBMD : Operation selection
bits : 1 - 2 (2 bit)
access : read-write
PRTBSEL : Duty cut/period cut factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTBSTCLR : TMnOFFSTR.PRTBST clear operation
bits : 3 - 6 (4 bit)
access : read-write
PRTBRLS : Return at the end of periodic
bits : 4 - 8 (5 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 5 - 12 (8 bit)
access : read
AOFFB : Duty cut function of TMnA pin output
bits : 8 - 17 (10 bit)
access : read-write
BOFFB : Duty cut function of TMnB pin output
bits : 10 - 21 (12 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 25 Duty Cut/Period Cut Co25trol Register
address_offset : 0x24A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTBEN : Duty cut/period cut enable
bits : 0 - 0 (1 bit)
access : read-write
PRTBMD : Operation selection
bits : 1 - 2 (2 bit)
access : read-write
PRTBSEL : Duty cut/period cut factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTBSTCLR : TMnOFFSTR.PRTBST clear operation
bits : 3 - 6 (4 bit)
access : read-write
PRTBRLS : Return at the end of periodic
bits : 4 - 8 (5 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 5 - 12 (8 bit)
access : read
AOFFB : Duty cut function of TMnA pin output
bits : 8 - 17 (10 bit)
access : read-write
BOFFB : Duty cut function of TMnB pin output
bits : 10 - 21 (12 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 24 Duty Cut/Period Cut Factor Selectio24 Register
address_offset : 0x24C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PBE : Duty cut/period cut factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PBE : Duty cut/period cut factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PBE : Duty cut/period cut factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PBE : Duty cut/period cut factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PBE : Duty cut/period cut factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PBE : Duty cut/period cut factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PBE : Duty cut/period cut factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PBE : Duty cut/period cut factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
CMP0PBE : Duty cut/period cut factor selection by CMP00
bits : 8 - 16 (9 bit)
access : read
CMP1PBE : Duty cut/period cut factor selection by CMP10
bits : 9 - 18 (10 bit)
access : read-write
CMP2PBE : Duty cut/period cut factor selection by CMP20
bits : 10 - 20 (11 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 25 Duty Cut/Period Cut Factor Selectio25 Register
address_offset : 0x24E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PBE : Duty cut/period cut factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PBE : Duty cut/period cut factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PBE : Duty cut/period cut factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PBE : Duty cut/period cut factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PBE : Duty cut/period cut factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PBE : Duty cut/period cut factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PBE : Duty cut/period cut factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PBE : Duty cut/period cut factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
CMP0PBE : Duty cut/period cut factor selection by CMP00
bits : 8 - 16 (9 bit)
access : read
CMP1PBE : Duty cut/period cut factor selection by CMP10
bits : 9 - 18 (10 bit)
access : read-write
CMP2PBE : Duty cut/period cut factor selection by CMP20
bits : 10 - 20 (11 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 24 Dead Time Setti24g Register
address_offset : 0x250 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
DTSTA : Dead time setting of Timer A pin
bits : 0 - 7 (8 bit)
access : read-write
DTSTB : Dead time setting of Timer B pin
bits : 8 - 23 (16 bit)
access : read-write
Timer 25 Dead Time Setti25g Register
address_offset : 0x252 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
DTSTA : Dead time setting of Timer A pin
bits : 0 - 7 (8 bit)
access : read-write
DTSTB : Dead time setting of Timer B pin
bits : 8 - 23 (16 bit)
access : read-write
Timer 24 Output Shift Amou24t Setti24g Register
address_offset : 0x254 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
SFTST : Set the shift amount of timer pin output.
bits : 0 - 15 (16 bit)
access : read-write
Timer 25 Output Shift Amou25t Setti25g Register
address_offset : 0x256 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
SFTST : Set the shift amount of timer pin output.
bits : 0 - 15 (16 bit)
access : read-write
Timer 24 Leadi24g Edge Bla24ki24g Setti24g Register
address_offset : 0x258 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBST : Set the blanking amount.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 25 Leadi25g Edge Bla25ki25g Setti25g Register
address_offset : 0x25A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBST : Set the blanking amount.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 21 Capture A Factor Selectio21 Register
address_offset : 0x26 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 24 Cou24t Directio24 Status Register
address_offset : 0x260 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 25 Cou25t Directio25 Status Register
address_offset : 0x262 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 24 Pi24 Protectio24 Status Register
address_offset : 0x264 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAST : Pin protection function state
bits : 0 - 0 (1 bit)
access : read
PRTBST : Duty cut function state
bits : 1 - 2 (2 bit)
access : read
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 25 Pi25 Protectio25 Status Register
address_offset : 0x266 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAST : Pin protection function state
bits : 0 - 0 (1 bit)
access : read
PRTBST : Duty cut function state
bits : 1 - 2 (2 bit)
access : read
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 24 Task Overflow Object Selectio24 Register
address_offset : 0x268 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TSKOVFE0 : Set TMnCA as task overflow judgment object.
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFE1 : Set TMnCB as task overflow judgment object.
bits : 1 - 2 (2 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 25 Task Overflow Object Selectio25 Register
address_offset : 0x26A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TSKOVFE0 : Set TMnCA as task overflow judgment object.
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFE1 : Set TMnCB as task overflow judgment object.
bits : 1 - 2 (2 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 20 Capture B Factor Selectio20 Register
address_offset : 0x28 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 21 Capture B Factor Selectio21 Register
address_offset : 0x2A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 20 Capture C Factor Selectio20 Register
address_offset : 0x2C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 21 Capture C Factor Selectio21 Register
address_offset : 0x2E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 0 Mode Register
address_offset : 0x2F000 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 1 Mode Register
address_offset : 0x2F002 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 0 Compare/Capture A Mode Register
address_offset : 0x2F004 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 0 Compare/Capture B Mode Register
address_offset : 0x2F005 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 1 Compare/Capture A Mode Register
address_offset : 0x2F006 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 1 Compare/Capture B Mode Register
address_offset : 0x2F007 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 0 Compare/Capture C Mode Register
address_offset : 0x2F008 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 1 Compare/Capture C Mode Register
address_offset : 0x2F00A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 0 Bi0ary Cou0ter
address_offset : 0x2F010 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 1 Bi1ary Cou1ter
address_offset : 0x2F012 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 0 Compare/Capture A Register
address_offset : 0x2F014 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 1 Compare/Capture A Register
address_offset : 0x2F016 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 0 Compare/Capture B Register
address_offset : 0x2F018 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 1 Compare/Capture B Register
address_offset : 0x2F01A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 0 Compare/Capture C Register
address_offset : 0x2F01C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 1 Compare/Capture C Register
address_offset : 0x2F01E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 0 Capture A Factor Selectio0 Register
address_offset : 0x2F020 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 1 Capture A Factor Selectio1 Register
address_offset : 0x2F022 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 0 Capture B Factor Selectio0 Register
address_offset : 0x2F024 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 1 Capture B Factor Selectio1 Register
address_offset : 0x2F026 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 0 Capture C Factor Selectio0 Register
address_offset : 0x2F028 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 1 Capture C Factor Selectio1 Register
address_offset : 0x2F02A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 0 Start Trigger Factor Selectio0 Register
address_offset : 0x2F030 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 1 Start Trigger Factor Selectio1 Register
address_offset : 0x2F032 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 0 I0terrupt Output Co0trol Register
address_offset : 0x2F034 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 1 I1terrupt Output Co1trol Register
address_offset : 0x2F036 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 0 Pi0 Protectio0 Co0trol Register
address_offset : 0x2F040 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 1 Pi1 Protectio1 Co1trol Register
address_offset : 0x2F042 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 0 Pi0 Protectio0 Factor Selectio0 Register
address_offset : 0x2F044 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 1 Pi1 Protectio1 Factor Selectio1 Register
address_offset : 0x2F046 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 0 Cou0t Directio0 Status Register
address_offset : 0x2F050 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 1 Cou1t Directio1 Status Register
address_offset : 0x2F052 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 2 Mode Register
address_offset : 0x2F060 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 3 Mode Register
address_offset : 0x2F062 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 2 Compare/Capture A Mode Register
address_offset : 0x2F064 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 2 Compare/Capture B Mode Register
address_offset : 0x2F065 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 3 Compare/Capture A Mode Register
address_offset : 0x2F066 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 3 Compare/Capture B Mode Register
address_offset : 0x2F067 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 2 Compare/Capture C Mode Register
address_offset : 0x2F068 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 3 Compare/Capture C Mode Register
address_offset : 0x2F06A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 2 Bi2ary Cou2ter
address_offset : 0x2F070 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 3 Bi3ary Cou3ter
address_offset : 0x2F072 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 2 Compare/Capture A Register
address_offset : 0x2F074 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 3 Compare/Capture A Register
address_offset : 0x2F076 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 2 Compare/Capture B Register
address_offset : 0x2F078 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 3 Compare/Capture B Register
address_offset : 0x2F07A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 2 Compare/Capture C Register
address_offset : 0x2F07C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 3 Compare/Capture C Register
address_offset : 0x2F07E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 2 Capture A Factor Selectio2 Register
address_offset : 0x2F080 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 3 Capture A Factor Selectio3 Register
address_offset : 0x2F082 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 2 Capture B Factor Selectio2 Register
address_offset : 0x2F084 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 3 Capture B Factor Selectio3 Register
address_offset : 0x2F086 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 2 Capture C Factor Selectio2 Register
address_offset : 0x2F088 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 3 Capture C Factor Selectio3 Register
address_offset : 0x2F08A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 2 Start Trigger Factor Selectio2 Register
address_offset : 0x2F090 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 3 Start Trigger Factor Selectio3 Register
address_offset : 0x2F092 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 2 I2terrupt Output Co2trol Register
address_offset : 0x2F094 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 3 I3terrupt Output Co3trol Register
address_offset : 0x2F096 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 2 Pi2 Protectio2 Co2trol Register
address_offset : 0x2F0A0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 3 Pi3 Protectio3 Co3trol Register
address_offset : 0x2F0A2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 2 Pi2 Protectio2 Factor Selectio2 Register
address_offset : 0x2F0A4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 3 Pi3 Protectio3 Factor Selectio3 Register
address_offset : 0x2F0A6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 2 Cou2t Directio2 Status Register
address_offset : 0x2F0B0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 3 Cou3t Directio3 Status Register
address_offset : 0x2F0B2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 4 Mode Register
address_offset : 0x2F0C0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 5 Mode Register
address_offset : 0x2F0C2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 4 Compare/Capture A Mode Register
address_offset : 0x2F0C4 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 4 Compare/Capture B Mode Register
address_offset : 0x2F0C5 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 5 Compare/Capture A Mode Register
address_offset : 0x2F0C6 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 5 Compare/Capture B Mode Register
address_offset : 0x2F0C7 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 4 Compare/Capture C Mode Register
address_offset : 0x2F0C8 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 5 Compare/Capture C Mode Register
address_offset : 0x2F0CA Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 4 Bi4ary Cou4ter
address_offset : 0x2F0D0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 5 Bi5ary Cou5ter
address_offset : 0x2F0D2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 4 Compare/Capture A Register
address_offset : 0x2F0D4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 5 Compare/Capture A Register
address_offset : 0x2F0D6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 4 Compare/Capture B Register
address_offset : 0x2F0D8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 5 Compare/Capture B Register
address_offset : 0x2F0DA Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 4 Compare/Capture C Register
address_offset : 0x2F0DC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 5 Compare/Capture C Register
address_offset : 0x2F0DE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 4 Capture A Factor Selectio4 Register
address_offset : 0x2F0E0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 5 Capture A Factor Selectio5 Register
address_offset : 0x2F0E2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 4 Capture B Factor Selectio4 Register
address_offset : 0x2F0E4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 5 Capture B Factor Selectio5 Register
address_offset : 0x2F0E6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 4 Capture C Factor Selectio4 Register
address_offset : 0x2F0E8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 5 Capture C Factor Selectio5 Register
address_offset : 0x2F0EA Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 4 Start Trigger Factor Selectio4 Register
address_offset : 0x2F0F0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 5 Start Trigger Factor Selectio5 Register
address_offset : 0x2F0F2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 4 I4terrupt Output Co4trol Register
address_offset : 0x2F0F4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 5 I5terrupt Output Co5trol Register
address_offset : 0x2F0F6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 4 Pi4 Protectio4 Co4trol Register
address_offset : 0x2F100 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 5 Pi5 Protectio5 Co5trol Register
address_offset : 0x2F102 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 4 Pi4 Protectio4 Factor Selectio4 Register
address_offset : 0x2F104 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 5 Pi5 Protectio5 Factor Selectio5 Register
address_offset : 0x2F106 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 4 Cou4t Directio4 Status Register
address_offset : 0x2F110 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 5 Cou5t Directio5 Status Register
address_offset : 0x2F112 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 6 Mode Register
address_offset : 0x2F120 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 7 Mode Register
address_offset : 0x2F122 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 6 Compare/Capture A Mode Register
address_offset : 0x2F124 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 6 Compare/Capture B Mode Register
address_offset : 0x2F125 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 7 Compare/Capture A Mode Register
address_offset : 0x2F126 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 7 Compare/Capture B Mode Register
address_offset : 0x2F127 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 6 Compare/Capture C Mode Register
address_offset : 0x2F128 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 7 Compare/Capture C Mode Register
address_offset : 0x2F12A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 6 Bi6ary Cou6ter
address_offset : 0x2F130 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 7 Bi7ary Cou7ter
address_offset : 0x2F132 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 6 Compare/Capture A Register
address_offset : 0x2F134 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 7 Compare/Capture A Register
address_offset : 0x2F136 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 6 Compare/Capture B Register
address_offset : 0x2F138 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 7 Compare/Capture B Register
address_offset : 0x2F13A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 6 Compare/Capture C Register
address_offset : 0x2F13C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 7 Compare/Capture C Register
address_offset : 0x2F13E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 6 Capture A Factor Selectio6 Register
address_offset : 0x2F140 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 7 Capture A Factor Selectio7 Register
address_offset : 0x2F142 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 6 Capture B Factor Selectio6 Register
address_offset : 0x2F144 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 7 Capture B Factor Selectio7 Register
address_offset : 0x2F146 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 6 Capture C Factor Selectio6 Register
address_offset : 0x2F148 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 7 Capture C Factor Selectio7 Register
address_offset : 0x2F14A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 6 Start Trigger Factor Selectio6 Register
address_offset : 0x2F150 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 7 Start Trigger Factor Selectio7 Register
address_offset : 0x2F152 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 6 I6terrupt Output Co6trol Register
address_offset : 0x2F154 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 7 I7terrupt Output Co7trol Register
address_offset : 0x2F156 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 6 Pi6 Protectio6 Co6trol Register
address_offset : 0x2F160 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 7 Pi7 Protectio7 Co7trol Register
address_offset : 0x2F162 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 6 Pi6 Protectio6 Factor Selectio6 Register
address_offset : 0x2F164 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 7 Pi7 Protectio7 Factor Selectio7 Register
address_offset : 0x2F166 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 6 Cou6t Directio6 Status Register
address_offset : 0x2F170 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 7 Cou7t Directio7 Status Register
address_offset : 0x2F172 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 8 Mode Register
address_offset : 0x2F180 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 9 Mode Register
address_offset : 0x2F182 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 8 Compare/Capture A Mode Register
address_offset : 0x2F184 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 8 Compare/Capture B Mode Register
address_offset : 0x2F185 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 9 Compare/Capture A Mode Register
address_offset : 0x2F186 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 9 Compare/Capture B Mode Register
address_offset : 0x2F187 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 8 Compare/Capture C Mode Register
address_offset : 0x2F188 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 9 Compare/Capture C Mode Register
address_offset : 0x2F18A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 8 Bi8ary Cou8ter
address_offset : 0x2F190 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 9 Bi9ary Cou9ter
address_offset : 0x2F192 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 8 Compare/Capture A Register
address_offset : 0x2F194 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 9 Compare/Capture A Register
address_offset : 0x2F196 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 8 Compare/Capture B Register
address_offset : 0x2F198 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 9 Compare/Capture B Register
address_offset : 0x2F19A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 8 Compare/Capture C Register
address_offset : 0x2F19C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 9 Compare/Capture C Register
address_offset : 0x2F19E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 8 Capture A Factor Selectio8 Register
address_offset : 0x2F1A0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 9 Capture A Factor Selectio9 Register
address_offset : 0x2F1A2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 8 Capture B Factor Selectio8 Register
address_offset : 0x2F1A4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 9 Capture B Factor Selectio9 Register
address_offset : 0x2F1A6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 8 Capture C Factor Selectio8 Register
address_offset : 0x2F1A8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 9 Capture C Factor Selectio9 Register
address_offset : 0x2F1AA Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 8 Start Trigger Factor Selectio8 Register
address_offset : 0x2F1B0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 9 Start Trigger Factor Selectio9 Register
address_offset : 0x2F1B2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 8 I8terrupt Output Co8trol Register
address_offset : 0x2F1B4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 9 I9terrupt Output Co9trol Register
address_offset : 0x2F1B6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 8 Pi8 Protectio8 Co8trol Register
address_offset : 0x2F1C0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 9 Pi9 Protectio9 Co9trol Register
address_offset : 0x2F1C2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 8 Pi8 Protectio8 Factor Selectio8 Register
address_offset : 0x2F1C4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 9 Pi9 Protectio9 Factor Selectio9 Register
address_offset : 0x2F1C6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 8 Cou8t Directio8 Status Register
address_offset : 0x2F1D0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 9 Cou9t Directio9 Status Register
address_offset : 0x2F1D2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 10 Mode Register
address_offset : 0x2F1E0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 11 Mode Register
address_offset : 0x2F1E2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 10 Compare/Capture A Mode Register
address_offset : 0x2F1E4 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 10 Compare/Capture B Mode Register
address_offset : 0x2F1E5 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 11 Compare/Capture A Mode Register
address_offset : 0x2F1E6 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 11 Compare/Capture B Mode Register
address_offset : 0x2F1E7 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 10 Compare/Capture C Mode Register
address_offset : 0x2F1E8 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 11 Compare/Capture C Mode Register
address_offset : 0x2F1EA Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 10 Bi10ary Cou10ter
address_offset : 0x2F1F0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 11 Bi11ary Cou11ter
address_offset : 0x2F1F2 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 10 Compare/Capture A Register
address_offset : 0x2F1F4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 11 Compare/Capture A Register
address_offset : 0x2F1F6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 10 Compare/Capture B Register
address_offset : 0x2F1F8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 11 Compare/Capture B Register
address_offset : 0x2F1FA Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 10 Compare/Capture C Register
address_offset : 0x2F1FC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 11 Compare/Capture C Register
address_offset : 0x2F1FE Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 10 Capture A Factor Selectio10 Register
address_offset : 0x2F200 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 11 Capture A Factor Selectio11 Register
address_offset : 0x2F202 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 10 Capture B Factor Selectio10 Register
address_offset : 0x2F204 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 11 Capture B Factor Selectio11 Register
address_offset : 0x2F206 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 10 Capture C Factor Selectio10 Register
address_offset : 0x2F208 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 11 Capture C Factor Selectio11 Register
address_offset : 0x2F20A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 10 Start Trigger Factor Selectio10 Register
address_offset : 0x2F210 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 11 Start Trigger Factor Selectio11 Register
address_offset : 0x2F212 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 10 I10terrupt Output Co10trol Register
address_offset : 0x2F214 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 11 I11terrupt Output Co11trol Register
address_offset : 0x2F216 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 10 Pi10 Protectio10 Co10trol Register
address_offset : 0x2F220 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 11 Pi11 Protectio11 Co11trol Register
address_offset : 0x2F222 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 10 Pi10 Protectio10 Factor Selectio10 Register
address_offset : 0x2F224 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 11 Pi11 Protectio11 Factor Selectio11 Register
address_offset : 0x2F226 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 10 Cou10t Directio10 Status Register
address_offset : 0x2F230 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 11 Cou11t Directio11 Status Register
address_offset : 0x2F232 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 12 Mode Register
address_offset : 0x2F240 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 13 Mode Register
address_offset : 0x2F242 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CK : Clock source Selection
bits : 0 - 3 (4 bit)
access : read-write
PSCNE : Pre-Scalar operation enable
bits : 4 - 8 (5 bit)
access : read-write
CKEG : Clock Source Edge Selection
bits : 5 - 10 (6 bit)
access : read-write
LDE : Timer n binary counter initialization
bits : 6 - 12 (7 bit)
access : read-write
CNE : Time n operation enable(*1)
bits : 7 - 14 (8 bit)
access : read-write
UD : Binary counter up/down selection
bits : 8 - 17 (10 bit)
access : read-write
CGE : Count clock mask enable
bits : 10 - 20 (11 bit)
access : read-write
CGESEL : Timer count control selection
bits : 11 - 22 (12 bit)
access : read-write
ONE : Timer 1-shot operation enable
bits : 12 - 24 (13 bit)
access : read-write
CLE : Timer binary counter clear enable
bits : 13 - 26 (14 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 14 - 28 (15 bit)
access : read
XF : The action status of the timer n
bits : 15 - 30 (16 bit)
access : read
Timer 12 Compare/Capture A Mode Register
address_offset : 0x2F244 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 12 Compare/Capture B Mode Register
address_offset : 0x2F245 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 13 Compare/Capture A Mode Register
address_offset : 0x2F246 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 13 Compare/Capture B Mode Register
address_offset : 0x2F247 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 12 Compare/Capture C Mode Register
address_offset : 0x2F248 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 13 Compare/Capture C Mode Register
address_offset : 0x2F24A Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 12 Bi12ary Cou12ter
address_offset : 0x2F250 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 13 Bi13ary Cou13ter
address_offset : 0x2F252 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BC : Value of the binary counter is read out.
bits : 0 - 15 (16 bit)
access : read
Timer 12 Compare/Capture A Register
address_offset : 0x2F254 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 13 Compare/Capture A Register
address_offset : 0x2F256 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CA : It is a register corresponding to compare A and capture A operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 12 Compare/Capture B Register
address_offset : 0x2F258 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 13 Compare/Capture B Register
address_offset : 0x2F25A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CB : It is a register corresponding to compare B and capture B operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 12 Compare/Capture C Register
address_offset : 0x2F25C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 13 Compare/Capture C Register
address_offset : 0x2F25E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CC : It is a register corresponding to compare C and capture C operation.
bits : 0 - 15 (16 bit)
access : read-write
Timer 12 Capture A Factor Selectio12 Register
address_offset : 0x2F260 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 13 Capture A Factor Selectio13 Register
address_offset : 0x2F262 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CAE : The capture A factor selection of timer n.
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CAE : The capture A factor selection of timer n.
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CAE : The capture A factor selection of timer n.
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CAE : The capture A factor selection of timer n.
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CAE : The capture A factor selection of timer n.
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CAE : The capture A factor selection of timer n.
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CAE : The capture A factor selection of timer n.
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CAE : The capture A factor selection of timer n.
bits : 7 - 14 (8 bit)
access : read-write
UDF0CAE : The capture A factor selection of timer n.
bits : 8 - 16 (9 bit)
access : read-write
UDF1CAE : The capture A factor selection of timer n.
bits : 9 - 18 (10 bit)
access : read-write
AI0CAE : The capture A factor selection of timer n.
bits : 10 - 20 (11 bit)
access : read-write
AI1CAE : The capture A factor selection of timer n.
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 12 Capture B Factor Selectio12 Register
address_offset : 0x2F264 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 13 Capture B Factor Selectio13 Register
address_offset : 0x2F266 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CBE : The capture B factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CBE : The capture B factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CBE : The capture B factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CBE : The capture B factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CBE : The capture B factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CBE : The capture B factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CBE : The capture B factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CBE : The capture B factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CBE : The capture B factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CBE : The capture B factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
BI0CBE : The capture B factor selection of timer n
bits : 10 - 20 (11 bit)
access : read-write
BI1CBE : The capture B factor selection of timer n
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 12 Capture C Factor Selectio12 Register
address_offset : 0x2F268 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 13 Capture C Factor Selectio13 Register
address_offset : 0x2F26A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0CCE : The capture C factor selection of timer n
bits : 0 - 0 (1 bit)
access : read-write
IRQ1CCE : The capture C factor selection of timer n
bits : 1 - 2 (2 bit)
access : read-write
IRQ2CCE : The capture C factor selection of timer n
bits : 2 - 4 (3 bit)
access : read-write
IRQ3CCE : The capture C factor selection of timer n
bits : 3 - 6 (4 bit)
access : read-write
IRQ4CCE : The capture C factor selection of timer n
bits : 4 - 8 (5 bit)
access : read-write
IRQ5CCE : The capture C factor selection of timer n
bits : 5 - 10 (6 bit)
access : read-write
IRQ6CCE : The capture C factor selection of timer n
bits : 6 - 12 (7 bit)
access : read-write
IRQ7CCE : The capture C factor selection of timer n
bits : 7 - 14 (8 bit)
access : read-write
UDF0CCE : The capture C factor selection of timer n
bits : 8 - 16 (9 bit)
access : read-write
UDF1CCE : The capture C factor selection of timer n
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 12 Start Trigger Factor Selectio12 Register
address_offset : 0x2F270 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 13 Start Trigger Factor Selectio13 Register
address_offset : 0x2F272 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 12 I12terrupt Output Co12trol Register
address_offset : 0x2F274 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 13 I13terrupt Output Co13trol Register
address_offset : 0x2F276 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 12 Pi12 Protectio12 Co12trol Register
address_offset : 0x2F280 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 13 Pi13 Protectio13 Co13trol Register
address_offset : 0x2F282 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
AOFF : TMnA pin output protection
bits : 2 - 5 (4 bit)
access : read-write
BOFF : TMnB pin output protection
bits : 4 - 9 (6 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 6 - 21 (16 bit)
access : read
Timer 12 Pi12 Protectio12 Factor Selectio12 Register
address_offset : 0x2F284 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 13 Pi13 Protectio13 Factor Selectio13 Register
address_offset : 0x2F286 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 12 Cou12t Directio12 Status Register
address_offset : 0x2F290 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 13 Cou13t Directio13 Status Register
address_offset : 0x2F292 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 20 Start Trigger Factor Selectio20 Register
address_offset : 0x30 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 21 Start Trigger Factor Selectio21 Register
address_offset : 0x32 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
STE : Timer n start trigger enable
bits : 0 - 0 (1 bit)
access : read-write
STEG : Start trigger factor edge selection
bits : 1 - 3 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read
STSEL : Start trigger factor selection
bits : 4 - 11 (8 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 20 I20terrupt Output Co20trol Register
address_offset : 0x34 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 21 I21terrupt Output Co21trol Register
address_offset : 0x36 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CNT : Number of times setting for timer n compare/capture C interrupt (Second time or later)
bits : 0 - 3 (4 bit)
access : read-write
SCNT : Number of times setting for timer n compare/capture C interrupt (First time)
bits : 4 - 11 (8 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 8 - 23 (16 bit)
access : read
Timer 20 Mode2 Register
address_offset : 0x4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
OUTMD : Output mode
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFEN : Task overflow detection enable
bits : 1 - 2 (2 bit)
access : read-write
DTEN : Dead time insertion
bits : 2 - 4 (3 bit)
access : read-write
ORMDA : Dead time insertion logic (TMnA)
bits : 3 - 6 (4 bit)
access : read-write
ORMDB : Dead time insertion logic (TMnB)
bits : 4 - 8 (5 bit)
access : read-write
SLFCNT : Dead time width auto control enable
bits : 5 - 10 (6 bit)
access : read-write
PXDTA : Output polarity of TMnA
bits : 6 - 12 (7 bit)
access : read-write
PXDTB : Output polarity of TMnB
bits : 7 - 14 (8 bit)
access : read-write
LEBEN : Leading edge blanking setting enable
bits : 8 - 16 (9 bit)
access : read-write
SFTEN : Output shift control enable
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : This bit must be set to 0.
bits : 10 - 20 (11 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 20 Pi20 Protectio20 Co20trol Register
address_offset : 0x40 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
PRTASEL : Protection factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTASTCLR : TMnOFFSTR.PRTAST clear operation
bits : 3 - 6 (4 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 4 - 11 (8 bit)
access : read
AOFFA : TMnA pin output protection
bits : 8 - 17 (10 bit)
access : read-write
BOFFA : TMnB pin output protection
bits : 10 - 21 (12 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 21 Pi21 Protectio21 Co21trol Register
address_offset : 0x42 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAEN : Pin protection enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 2 (2 bit)
access : read
PRTASEL : Protection factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTASTCLR : TMnOFFSTR.PRTAST clear operation
bits : 3 - 6 (4 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 4 - 11 (8 bit)
access : read
AOFFA : TMnA pin output protection
bits : 8 - 17 (10 bit)
access : read-write
BOFFA : TMnB pin output protection
bits : 10 - 21 (12 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 20 Pi20 Protectio20 Factor Selectio20 Register
address_offset : 0x44 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PAE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PAE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PAE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PAE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PAE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PAE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PAE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PAE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPAE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PAE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PAE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PAE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APAE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPAE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APAE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPAE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 21 Pi21 Protectio21 Factor Selectio21 Register
address_offset : 0x46 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PAE : Protection factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PAE : Protection factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PAE : Protection factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PAE : Protection factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PAE : Protection factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PAE : Protection factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PAE : Protection factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PAE : Protection factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
NMIPAE : Protection factor selection by NMI
bits : 8 - 16 (9 bit)
access : read-write
CMP0PAE : Protection factor selection by CMP00
bits : 9 - 18 (10 bit)
access : read-write
CMP1PAE : Protection factor selection by CMP10
bits : 10 - 20 (11 bit)
access : read-write
CMP2PAE : Protection factor selection by CMP20
bits : 11 - 22 (12 bit)
access : read-write
AD0APAE : Protection factor selection by A/D0 conversion error detection interrupt
bits : 12 - 24 (13 bit)
access : read-write
AD0BPAE : Protection factor selection by A/D0 conversion error detection B interrupt
bits : 13 - 26 (14 bit)
access : read-write
AD1APAE : Protection factor selection by A/D1 conversion error detection interrupt
bits : 14 - 28 (15 bit)
access : read-write
AD1BPAE : Protection factor selection by A/D1 conversion error detection B interrupt
bits : 15 - 30 (16 bit)
access : read-write
Timer 20 Duty Cut/Period Cut Co20trol Register
address_offset : 0x48 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTBEN : Duty cut/period cut enable
bits : 0 - 0 (1 bit)
access : read-write
PRTBMD : Operation selection
bits : 1 - 2 (2 bit)
access : read-write
PRTBSEL : Duty cut/period cut factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTBSTCLR : TMnOFFSTR.PRTBST clear operation
bits : 3 - 6 (4 bit)
access : read-write
PRTBRLS : Return at the end of periodic
bits : 4 - 8 (5 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 5 - 12 (8 bit)
access : read
AOFFB : Duty cut function of TMnA pin output
bits : 8 - 17 (10 bit)
access : read-write
BOFFB : Duty cut function of TMnB pin output
bits : 10 - 21 (12 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 21 Duty Cut/Period Cut Co21trol Register
address_offset : 0x4A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTBEN : Duty cut/period cut enable
bits : 0 - 0 (1 bit)
access : read-write
PRTBMD : Operation selection
bits : 1 - 2 (2 bit)
access : read-write
PRTBSEL : Duty cut/period cut factor polarity selection
bits : 2 - 4 (3 bit)
access : read-write
PRTBSTCLR : TMnOFFSTR.PRTBST clear operation
bits : 3 - 6 (4 bit)
access : read-write
PRTBRLS : Return at the end of periodic
bits : 4 - 8 (5 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 5 - 12 (8 bit)
access : read
AOFFB : Duty cut function of TMnA pin output
bits : 8 - 17 (10 bit)
access : read-write
BOFFB : Duty cut function of TMnB pin output
bits : 10 - 21 (12 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Timer 20 Duty Cut/Period Cut Factor Selectio20 Register
address_offset : 0x4C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PBE : Duty cut/period cut factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PBE : Duty cut/period cut factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PBE : Duty cut/period cut factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PBE : Duty cut/period cut factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PBE : Duty cut/period cut factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PBE : Duty cut/period cut factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PBE : Duty cut/period cut factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PBE : Duty cut/period cut factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
CMP0PBE : Duty cut/period cut factor selection by CMP00
bits : 8 - 16 (9 bit)
access : read
CMP1PBE : Duty cut/period cut factor selection by CMP10
bits : 9 - 18 (10 bit)
access : read-write
CMP2PBE : Duty cut/period cut factor selection by CMP20
bits : 10 - 20 (11 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 21 Duty Cut/Period Cut Factor Selectio21 Register
address_offset : 0x4E Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
IRQ0PBE : Duty cut/period cut factor selection by IRQ00
bits : 0 - 0 (1 bit)
access : read-write
IRQ1PBE : Duty cut/period cut factor selection by IRQ01
bits : 1 - 2 (2 bit)
access : read-write
IRQ2PBE : Duty cut/period cut factor selection by IRQ08
bits : 2 - 4 (3 bit)
access : read-write
IRQ3PBE : Duty cut/period cut factor selection by IRQ09
bits : 3 - 6 (4 bit)
access : read-write
IRQ4PBE : Duty cut/period cut factor selection by IRQ14
bits : 4 - 8 (5 bit)
access : read-write
IRQ5PBE : Duty cut/period cut factor selection by IRQ15
bits : 5 - 10 (6 bit)
access : read-write
IRQ6PBE : Duty cut/period cut factor selection by IRQ18
bits : 6 - 12 (7 bit)
access : read-write
IRQ7PBE : Duty cut/period cut factor selection by IRQ19
bits : 7 - 14 (8 bit)
access : read-write
CMP0PBE : Duty cut/period cut factor selection by CMP00
bits : 8 - 16 (9 bit)
access : read
CMP1PBE : Duty cut/period cut factor selection by CMP10
bits : 9 - 18 (10 bit)
access : read-write
CMP2PBE : Duty cut/period cut factor selection by CMP20
bits : 10 - 20 (11 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 20 Dead Time Setti20g Register
address_offset : 0x50 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
DTSTA : Dead time setting of Timer A pin
bits : 0 - 7 (8 bit)
access : read-write
DTSTB : Dead time setting of Timer B pin
bits : 8 - 23 (16 bit)
access : read-write
Timer 21 Dead Time Setti21g Register
address_offset : 0x52 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
DTSTA : Dead time setting of Timer A pin
bits : 0 - 7 (8 bit)
access : read-write
DTSTB : Dead time setting of Timer B pin
bits : 8 - 23 (16 bit)
access : read-write
Timer 20 Output Shift Amou20t Setti20g Register
address_offset : 0x54 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
SFTST : Set the shift amount of timer pin output.
bits : 0 - 15 (16 bit)
access : read-write
Timer 21 Output Shift Amou21t Setti21g Register
address_offset : 0x56 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
SFTST : Set the shift amount of timer pin output.
bits : 0 - 15 (16 bit)
access : read-write
Timer 20 Leadi20g Edge Bla20ki20g Setti20g Register
address_offset : 0x58 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBST : Set the blanking amount.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 21 Leadi21g Edge Bla21ki21g Setti21g Register
address_offset : 0x5A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBST : Set the blanking amount.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 21 Mode2 Register
address_offset : 0x6 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
OUTMD : Output mode
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFEN : Task overflow detection enable
bits : 1 - 2 (2 bit)
access : read-write
DTEN : Dead time insertion
bits : 2 - 4 (3 bit)
access : read-write
ORMDA : Dead time insertion logic (TMnA)
bits : 3 - 6 (4 bit)
access : read-write
ORMDB : Dead time insertion logic (TMnB)
bits : 4 - 8 (5 bit)
access : read-write
SLFCNT : Dead time width auto control enable
bits : 5 - 10 (6 bit)
access : read-write
PXDTA : Output polarity of TMnA
bits : 6 - 12 (7 bit)
access : read-write
PXDTB : Output polarity of TMnB
bits : 7 - 14 (8 bit)
access : read-write
LEBEN : Leading edge blanking setting enable
bits : 8 - 16 (9 bit)
access : read-write
SFTEN : Output shift control enable
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : This bit must be set to 0.
bits : 10 - 20 (11 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 11 - 26 (16 bit)
access : read
Timer 20 Cou20t Directio20 Status Register
address_offset : 0x60 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 21 Cou21t Directio21 Status Register
address_offset : 0x62 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
BCSTR : The count direction of binary counter
bits : 0 - 0 (1 bit)
access : read
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Timer 20 Pi20 Protectio20 Status Register
address_offset : 0x64 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAST : Pin protection function state
bits : 0 - 0 (1 bit)
access : read
PRTBST : Duty cut function state
bits : 1 - 2 (2 bit)
access : read
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 21 Pi21 Protectio21 Status Register
address_offset : 0x66 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
PRTAST : Pin protection function state
bits : 0 - 0 (1 bit)
access : read
PRTBST : Duty cut function state
bits : 1 - 2 (2 bit)
access : read
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 20 Task Overflow Object Selectio20 Register
address_offset : 0x68 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TSKOVFE0 : Set TMnCA as task overflow judgment object.
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFE1 : Set TMnCB as task overflow judgment object.
bits : 1 - 2 (2 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 21 Task Overflow Object Selectio21 Register
address_offset : 0x6A Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TSKOVFE0 : Set TMnCA as task overflow judgment object.
bits : 0 - 0 (1 bit)
access : read-write
TSKOVFE1 : Set TMnCB as task overflow judgment object.
bits : 1 - 2 (2 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
Timer 20 Compare/Capture A Mode Register
address_offset : 0x8 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 20 Compare/Capture B Mode Register
address_offset : 0x9 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 21 Compare/Capture A Mode Register
address_offset : 0xA Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
AO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
AOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
ACE : Capture A operation enable
bits : 3 - 6 (4 bit)
access : read-write
ACLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
AEG : Capture factor A edge selection
bits : 5 - 11 (7 bit)
access : read-write
ACM : Compare A operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 21 Compare/Capture B Mode Register
address_offset : 0xB Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
BO : Timer pin A output waveform selection
bits : 0 - 1 (2 bit)
access : read-write
BOP : Timer output polarity
bits : 2 - 4 (3 bit)
access : read-write
BCE : Capture B operation enable
bits : 3 - 6 (4 bit)
access : read-write
BCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
BEG : Capture factor B edge selection
bits : 5 - 11 (7 bit)
access : read-write
BCM : Compare B operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 20 Compare/Capture C Mode Register
address_offset : 0xC Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Timer 21 Compare/Capture C Mode Register
address_offset : 0xE Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
__reserve0 : 0 is always read out.
bits : 0 - 1 (2 bit)
access : read
ADSTE : A/D start trigger enable
bits : 2 - 4 (3 bit)
access : read-write
CCE : Capture C operation enable
bits : 3 - 6 (4 bit)
access : read-write
CCLE : Capture counter clear
bits : 4 - 8 (5 bit)
access : read-write
CEG : Capture factor C edge selection
bits : 5 - 11 (7 bit)
access : read-write
CCM : Compare C operation mode selection
bits : 7 - 14 (8 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.