\n
address_offset : 0x0 Bytes (0x0)
size : 0x2DC byte (0x0)
mem_usage : registers
protection :
Synchronous Start Control Register
address_offset : 0x0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GTMRSTART : Global timer operation enable
bits : 0 - 0 (1 bit)
access : read-write
GTMRCKSEL : Selection of count clock at global timer
bits : 1 - 2 (2 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 2 - 17 (16 bit)
access : read
GPWM0 Sy0chro0ous Start Timi0g set Register
address_offset : 0x10 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
IRQ00 Bla00ki00g Co00trol Register
address_offset : 0x100 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ00 Bla00ki00g set Register
address_offset : 0x104 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ00 Bla00ki00g Target Port set Register
address_offset : 0x108 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ01 Bla01ki01g Co01trol Register
address_offset : 0x110 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ01 Bla01ki01g set Register
address_offset : 0x114 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ01 Bla01ki01g Target Port set Register
address_offset : 0x118 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ02 Bla02ki02g Co02trol Register
address_offset : 0x120 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ02 Bla02ki02g set Register
address_offset : 0x124 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ02 Bla02ki02g Target Port set Register
address_offset : 0x128 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ03 Bla03ki03g Co03trol Register
address_offset : 0x130 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ03 Bla03ki03g set Register
address_offset : 0x134 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ03 Bla03ki03g Target Port set Register
address_offset : 0x138 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
GPWM1 Sy1chro1ous Start Timi1g set Register
address_offset : 0x14 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
IRQ04 Bla04ki04g Co04trol Register
address_offset : 0x140 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ04 Bla04ki04g set Register
address_offset : 0x144 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ04 Bla04ki04g Target Port set Register
address_offset : 0x148 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ05 Bla05ki05g Co05trol Register
address_offset : 0x150 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ05 Bla05ki05g set Register
address_offset : 0x154 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ05 Bla05ki05g Target Port set Register
address_offset : 0x158 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
GPWM2 Sy2chro2ous Start Timi2g set Register
address_offset : 0x18 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
IRQ08 Bla08ki08g Co08trol Register
address_offset : 0x180 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ08 Bla08ki08g set Register
address_offset : 0x184 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ08 Bla08ki08g Target Port set Register
address_offset : 0x188 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ09 Bla09ki09g Co09trol Register
address_offset : 0x190 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ09 Bla09ki09g set Register
address_offset : 0x194 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ09 Bla09ki09g Target Port set Register
address_offset : 0x198 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ10 Bla10ki10g Co10trol Register
address_offset : 0x1A0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ10 Bla10ki10g set Register
address_offset : 0x1A4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ10 Bla10ki10g Target Port set Register
address_offset : 0x1A8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ11 Bla11ki11g Co11trol Register
address_offset : 0x1B0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ11 Bla11ki11g set Register
address_offset : 0x1B4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ11 Bla11ki11g Target Port set Register
address_offset : 0x1B8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
GPWM3 Sy3chro3ous Start Timi3g set Register
address_offset : 0x1C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
IRQ12 Bla12ki12g Co12trol Register
address_offset : 0x1C0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ12 Bla12ki12g set Register
address_offset : 0x1C4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ12 Bla12ki12g Target Port set Register
address_offset : 0x1C8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ13 Bla13ki13g Co13trol Register
address_offset : 0x1D0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ13 Bla13ki13g set Register
address_offset : 0x1D4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ13 Bla13ki13g Target Port set Register
address_offset : 0x1D8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ14 Bla14ki14g Co14trol Register
address_offset : 0x1E0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ14 Bla14ki14g set Register
address_offset : 0x1E4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ14 Bla14ki14g Target Port set Register
address_offset : 0x1E8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ15 Bla15ki15g Co15trol Register
address_offset : 0x1F0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ15 Bla15ki15g set Register
address_offset : 0x1F4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ15 Bla15ki15g Target Port set Register
address_offset : 0x1F8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
GPWM4 Sy4chro4ous Start Timi4g set Register
address_offset : 0x20 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
IRQ16 Bla16ki16g Co16trol Register
address_offset : 0x200 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ16 Bla16ki16g set Register
address_offset : 0x204 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ16 Bla16ki16g Target Port set Register
address_offset : 0x208 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ17 Bla17ki17g Co17trol Register
address_offset : 0x210 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ17 Bla17ki17g set Register
address_offset : 0x214 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ17 Bla17ki17g Target Port set Register
address_offset : 0x218 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ18 Bla18ki18g Co18trol Register
address_offset : 0x220 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ18 Bla18ki18g set Register
address_offset : 0x224 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ18 Bla18ki18g Target Port set Register
address_offset : 0x228 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
IRQ19 Bla19ki19g Co19trol Register
address_offset : 0x230 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
IRQ19 Bla19ki19g set Register
address_offset : 0x234 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
IRQ19 Bla19ki19g Target Port set Register
address_offset : 0x238 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
GPWM5 Sy5chro5ous Start Timi5g set Register
address_offset : 0x24 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
CMP00 Bla00ki00g Co00trol Register
address_offset : 0x240 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP00 Bla00ki00g set Register
address_offset : 0x244 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP00 Bla00ki00g Target Port set Register
address_offset : 0x248 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
CMP01 Bla01ki01g Co01trol Register
address_offset : 0x250 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP01 Bla01ki01g set Register
address_offset : 0x254 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP01 Bla01ki01g Target Port set Register
address_offset : 0x258 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
CMP10 Bla10ki10g Co10trol Register
address_offset : 0x260 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP10 Bla10ki10g set Register
address_offset : 0x264 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP10 Bla10ki10g Target Port set Register
address_offset : 0x268 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
CMP11 Bla11ki11g Co11trol Register
address_offset : 0x270 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP11 Bla11ki11g set Register
address_offset : 0x274 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP11 Bla11ki11g Target Port set Register
address_offset : 0x278 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
GPWM6 Sy6chro6ous Start Timi6g set Register
address_offset : 0x28 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
CMP20 Bla20ki20g Co20trol Register
address_offset : 0x280 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP20 Bla20ki20g set Register
address_offset : 0x284 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP20 Bla20ki20g Target Port set Register
address_offset : 0x288 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
CMP21 Bla21ki21g Co21trol Register
address_offset : 0x290 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP21 Bla21ki21g set Register
address_offset : 0x294 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP21 Bla21ki21g Target Port set Register
address_offset : 0x298 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
CMP30 Bla30ki30g Co30trol Register
address_offset : 0x2A0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP30 Bla30ki30g set Register
address_offset : 0x2A4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP30 Bla30ki30g Target Port set Register
address_offset : 0x2A8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
CMP31 Bla31ki31g Co31trol Register
address_offset : 0x2B0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP31 Bla31ki31g set Register
address_offset : 0x2B4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP31 Bla31ki31g Target Port set Register
address_offset : 0x2B8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
GPWM7 Sy7chro7ous Start Timi7g set Register
address_offset : 0x2C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
CMP40 Bla40ki40g Co40trol Register
address_offset : 0x2C0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP40 Bla40ki40g set Register
address_offset : 0x2C4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP40 Bla40ki40g Target Port set Register
address_offset : 0x2C8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
CMP41 Bla41ki41g Co41trol Register
address_offset : 0x2D0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBEN : Blanking function operation enable
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
CMP41 Bla41ki41g set Register
address_offset : 0x2D4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
LEBSET : Set Blanking period.
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
CMP41 Bla41ki41g Target Port set Register
address_offset : 0x2D8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output blanking target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output blanking target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output blanking target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output blanking target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output blanking target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output blanking target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output blanking target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output blanking target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output blanking target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output blanking target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output blanking target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output blanking target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output blanking target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output blanking target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output blanking target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output blanking target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output blanking target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output blanking target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output blanking target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output blanking target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 24 - 55 (32 bit)
access : read
GPWM8 Sy8chro8ous Start Timi8g set Register
address_offset : 0x30 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
GPWM9 Sy9chro9ous Start Timi9g set Register
address_offset : 0x34 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnDST : Set the count value of the global timer that starts GPWMn.
bits : 0 - 15 (16 bit)
access : read-write
Synchronous Start Target Selection Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM0SYST : GPWM0 synchronous start selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM1SYST : GPWM1 synchronous start selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM2SYST : GPWM2 synchronous start selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM3SYST : GPWM3 synchronous start selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM4SYST : GPWM4 synchronous start selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM5SYST : GPWM5 synchronous start selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM6SYST : GPWM6 synchronous start selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM7SYST : GPWM7 synchronous start selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM8SYST : GPWM8 synchronous start selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM9SYST : GPWM9 synchronous start selection
bits : 9 - 18 (10 bit)
access : read-write
__reserve0 : This bit must be set to 0 .
bits : 12 - 24 (13 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 13 - 28 (16 bit)
access : read
TM20SYST : Timer 20 synchronous start selection
bits : 16 - 32 (17 bit)
access : read-write
TM21SYST : Timer 21 synchronous start selection
bits : 17 - 34 (18 bit)
access : read-write
TM22SYST : Timer 22 synchronous start selection
bits : 18 - 36 (19 bit)
access : read-write
TM23SYST : Timer 23 synchronous start selection
bits : 19 - 38 (20 bit)
access : read-write
TM24SYST : Timer 24 synchronous start selection
bits : 20 - 40 (21 bit)
access : read-write
TM25SYST : Timer 25 synchronous start selection
bits : 21 - 42 (22 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 22 - 53 (32 bit)
access : read
Timer 20 Sy20chro20ous Start Timi20g set Register
address_offset : 0x40 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnDST : Set the count value of the global timer that starts Timer n.
bits : 0 - 15 (16 bit)
access : read-write
Timer 21 Sy21chro21ous Start Timi21g set Register
address_offset : 0x44 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnDST : Set the count value of the global timer that starts Timer n.
bits : 0 - 15 (16 bit)
access : read-write
Timer 22 Sy22chro22ous Start Timi22g set Register
address_offset : 0x48 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnDST : Set the count value of the global timer that starts Timer n.
bits : 0 - 15 (16 bit)
access : read-write
Timer 23 Sy23chro23ous Start Timi23g set Register
address_offset : 0x4C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnDST : Set the count value of the global timer that starts Timer n.
bits : 0 - 15 (16 bit)
access : read-write
Timer 24 Sy24chro24ous Start Timi24g set Register
address_offset : 0x50 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnDST : Set the count value of the global timer that starts Timer n.
bits : 0 - 15 (16 bit)
access : read-write
Timer 25 Sy25chro25ous Start Timi25g set Register
address_offset : 0x54 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnDST : Set the count value of the global timer that starts Timer n.
bits : 0 - 15 (16 bit)
access : read-write
Conflict Detection Control Register
address_offset : 0x60 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
CMPTEN : Operation enable of Conflict detection/Automatic avoidance function
bits : 0 - 0 (1 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 1 - 16 (16 bit)
access : read
Conflict Detection A/D Conversion Start Trigger Selection Register
address_offset : 0x64 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
AD0TATGT : Selection of conflict detection and avoidance operation of A/D0 conversion start trigger A
bits : 0 - 1 (2 bit)
access : read-write
AD0TBTGT : Selection of conflict detection and avoidance operation of A/D0 conversion start trigger B
bits : 2 - 5 (4 bit)
access : read-write
AD1TATGT : Selection of conflict detection and avoidance operation of A/D1 conversion start trigger A
bits : 4 - 9 (6 bit)
access : read-write
AD1TBTGT : Selection of conflict detection and avoidance operation of A/D1 conversion start trigger B
bits : 6 - 13 (8 bit)
access : read-write
AD2TATGT : Selection of conflict detection and avoidance operation of A/D2 conversion start trigger A
bits : 8 - 17 (10 bit)
access : read-write
AD2TBTGT : Selection of conflict detection and avoidance operation of A/D2 conversion start trigger B
bits : 10 - 21 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Conflict Detection Status Register
address_offset : 0x68 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
AD0TASTAT : Conflict detection of A/D0 conversion start trigger A
bits : 0 - 0 (1 bit)
access : read
AD0TBSTAT : Conflict detection of A/D0 conversion start trigger B
bits : 1 - 2 (2 bit)
access : read
AD1TASTAT : Conflict detection of A/D1 conversion start trigger A
bits : 2 - 4 (3 bit)
access : read
AD1TBSTAT : Conflict detection of A/D1 conversion start trigger B
bits : 3 - 6 (4 bit)
access : read
AD2TASTAT : Conflict detection of A/D2 conversion start trigger A
bits : 4 - 8 (5 bit)
access : read
AD2TBSTAT : Conflict detection of A/D2 conversion start trigger B
bits : 5 - 10 (6 bit)
access : read
__reserve0 : 0 is always read out.
bits : 6 - 13 (8 bit)
access : read
AD0TALMT : Delay status of A/D0 conversion start trigger A
bits : 8 - 16 (9 bit)
access : read
AD0TBLMT : Delay status of A/D0 conversion start trigger B
bits : 9 - 18 (10 bit)
access : read
AD1TALMT : Delay status of A/D1 conversion start trigger A
bits : 10 - 20 (11 bit)
access : read
AD1TBLMT : Delay status of A/D1 conversion start trigger B
bits : 11 - 22 (12 bit)
access : read
AD2TALMT : Delay status of A/D2 conversion start trigger A
bits : 12 - 24 (13 bit)
access : read
AD2TBLMT : Delay status of A/D2 conversion start trigger B
bits : 13 - 26 (14 bit)
access : read
__reserve1 : 0 is always read out.
bits : 14 - 29 (16 bit)
access : read
Conflict Detection Timer Output Selection Register A
address_offset : 0x70 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
GPWM00EN : GPWM00 output conflict detection target pin selection
bits : 0 - 0 (1 bit)
access : read-write
GPWM01EN : GPWM01 output conflict detection target pin selection
bits : 1 - 2 (2 bit)
access : read-write
GPWM10EN : GPWM10 output conflict detection target pin selection
bits : 2 - 4 (3 bit)
access : read-write
GPWM11EN : GPWM11 output conflict detection target pin selection
bits : 3 - 6 (4 bit)
access : read-write
GPWM20EN : GPWM20 output conflict detection target pin selection
bits : 4 - 8 (5 bit)
access : read-write
GPWM21EN : GPWM21 output conflict detection target pin selection
bits : 5 - 10 (6 bit)
access : read-write
GPWM30EN : GPWM30 output conflict detection target pin selection
bits : 6 - 12 (7 bit)
access : read-write
GPWM31EN : GPWM31 output conflict detection target pin selection
bits : 7 - 14 (8 bit)
access : read-write
GPWM40EN : GPWM40 output conflict detection target pin selection
bits : 8 - 16 (9 bit)
access : read-write
GPWM41EN : GPWM41 output conflict detection target pin selection
bits : 9 - 18 (10 bit)
access : read-write
GPWM50EN : GPWM50 output conflict detection target pin selection
bits : 10 - 20 (11 bit)
access : read-write
GPWM51EN : GPWM51 output conflict detection target pin selection
bits : 11 - 22 (12 bit)
access : read-write
GPWM60EN : GPWM60 output conflict detection target pin selection
bits : 12 - 24 (13 bit)
access : read-write
GPWM61EN : GPWM61 output conflict detection target pin selection
bits : 13 - 26 (14 bit)
access : read-write
GPWM70EN : GPWM70 output conflict detection target pin selection
bits : 14 - 28 (15 bit)
access : read-write
GPWM71EN : GPWM71 output conflict detection target pin selection
bits : 15 - 30 (16 bit)
access : read-write
GPWM80EN : GPWM80 output conflict detection target pin selection
bits : 16 - 32 (17 bit)
access : read-write
GPWM81EN : GPWM81 output conflict detection target pin selection
bits : 17 - 34 (18 bit)
access : read-write
GPWM90EN : GPWM90 output conflict detection target pin selection
bits : 18 - 36 (19 bit)
access : read-write
GPWM91EN : GPWM91 output conflict detection target pin selection
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : This bit must be set to 0 .
bits : 24 - 48 (25 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 25 - 56 (32 bit)
access : read
Conflict Detection Timer Output Selection Register B
address_offset : 0x74 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TM20AOEN : TM20AO output conflict detection target pin selection
bits : 0 - 0 (1 bit)
access : read-write
TM20BOEN : TM20BO output conflict detection target pin selection
bits : 1 - 2 (2 bit)
access : read-write
TM21AOEN : TM21AO output conflict detection target pin selection
bits : 2 - 4 (3 bit)
access : read-write
TM21BOEN : TM21BO output conflict detection target pin selection
bits : 3 - 6 (4 bit)
access : read-write
TM22AOEN : TM22AO output conflict detection target pin selection
bits : 4 - 8 (5 bit)
access : read-write
TM22BOEN : TM22BO output conflict detection target pin selection
bits : 5 - 10 (6 bit)
access : read-write
TM23AOEN : TM23AO output conflict detection target pin selection
bits : 6 - 12 (7 bit)
access : read-write
TM23BOEN : TM23BO output conflict detection target pin selection
bits : 7 - 14 (8 bit)
access : read-write
TM24AOEN : TM24AO output conflict detection target pin selection
bits : 8 - 16 (9 bit)
access : read-write
TM24BOEN : TM24BO output conflict detection target pin selection
bits : 9 - 18 (10 bit)
access : read-write
TM25AOEN : TM25AO output conflict detection target pin selection
bits : 10 - 20 (11 bit)
access : read-write
TM25BOEN : TM25BO output conflict detection target pin selection
bits : 11 - 22 (12 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 12 - 27 (16 bit)
access : read
Global timer cycle set register
address_offset : 0x8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GTIMERST : Set global timer count cycle
bits : 0 - 15 (16 bit)
access : read-write
GPWM0 Co0flict Detectio0 Period set Register
address_offset : 0x80 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM1 Co1flict Detectio1 Period set Register
address_offset : 0x84 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM2 Co2flict Detectio2 Period set Register
address_offset : 0x88 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM3 Co3flict Detectio3 Period set Register
address_offset : 0x8C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM4 Co4flict Detectio4 Period set Register
address_offset : 0x90 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM5 Co5flict Detectio5 Period set Register
address_offset : 0x94 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM6 Co6flict Detectio6 Period set Register
address_offset : 0x98 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM7 Co7flict Detectio7 Period set Register
address_offset : 0x9C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM8 Co8flict Detectio8 Period set Register
address_offset : 0xA0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
GPWM9 Co9flict Detectio9 Period set Register
address_offset : 0xA4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
GPWMnCPTC : Set conflict detection period of GPWMn output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 20 Co20flict Detectio20 Period set Register
address_offset : 0xB0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnCPTC : Set conflict detection period of Timer n output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 21 Co21flict Detectio21 Period set Register
address_offset : 0xB4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnCPTC : Set conflict detection period of Timer n output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 22 Co22flict Detectio22 Period set Register
address_offset : 0xB8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnCPTC : Set conflict detection period of Timer n output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 23 Co23flict Detectio23 Period set Register
address_offset : 0xBC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnCPTC : Set conflict detection period of Timer n output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 24 Co24flict Detectio24 Period set Register
address_offset : 0xC0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnCPTC : Set conflict detection period of Timer n output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Timer 25 Co25flict Detectio25 Period set Register
address_offset : 0xC4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
TMnCPTC : Set conflict detection period of Timer n output
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
A/D0A Co0Aversio0A Start Trigger Avoida0Ace Limit Set Register
address_offset : 0xD0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
ADnSTLMT : Set avoidance limit period of A/Dn conversion start trigger
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
A/D0B Co0Bversio0B Start Trigger Avoida0Bce Limit Set Register
address_offset : 0xD4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
ADnSTLMT : Set avoidance limit period of A/Dn conversion start trigger
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
A/D1A Co1Aversio1A Start Trigger Avoida1Ace Limit Set Register
address_offset : 0xD8 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
ADnSTLMT : Set avoidance limit period of A/Dn conversion start trigger
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
A/D1B Co1Bversio1B Start Trigger Avoida1Bce Limit Set Register
address_offset : 0xDC Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
ADnSTLMT : Set avoidance limit period of A/Dn conversion start trigger
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
A/D2A Co2Aversio2A Start Trigger Avoida2Ace Limit Set Register
address_offset : 0xE0 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
ADnSTLMT : Set avoidance limit period of A/Dn conversion start trigger
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
A/D2B Co2Bversio2B Start Trigger Avoida2Bce Limit Set Register
address_offset : 0xE4 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
ADnSTLMT : Set avoidance limit period of A/Dn conversion start trigger
bits : 0 - 9 (10 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 10 - 25 (16 bit)
access : read
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.