\n
address_offset : 0x0 Bytes (0x0)
size : 0x74 byte (0x0)
mem_usage : registers
protection :
CRC0 Data Register MSB 1st
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
DATA_MSB : Data written to this register will be taken to perform CRC calculation with Most Significant Bit (MSB) First.
bits : 0 - 31 (32 bit)
access : write
CRC0 Clear Register
address_offset : 0x10 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
CLR : Set CRC0 seed value.
bits : 0 - 0 (1 bit)
access : write
__reserve0 : 0 is always read out.
bits : 1 - 8 (8 bit)
access : read
CRC1 Data Register MSB 1st
address_offset : 0x20 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
DATA_MSB : Data written to this register will be taken to perform CRC calculation with Most Significant Bit (MSB) First.
bits : 0 - 7 (8 bit)
access : write
CRC1 Data Register LSB 1st
address_offset : 0x24 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
DATA_LSB : Data written to this register will be taken to perform CRC calculation with Least Significant Bit (LSB) First.
bits : 0 - 7 (8 bit)
access : write
CRC1 Checksum Register MSB 1st
address_offset : 0x28 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
RES_MSB : A write access to this register will load CRC1 seed value to CRC1RES_MSB register.
bits : 0 - 15 (16 bit)
access : read-write
CRC1 Checksum Register LSB 1st
address_offset : 0x2C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
RES_LSB : A read access to this register read out CRC1 checksum value with LSB First.
bits : 0 - 15 (16 bit)
access : read
CRC1 Clear Register
address_offset : 0x30 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
CLR : Set CRC1 seed value.
bits : 0 - 0 (1 bit)
access : write
__reserve0 : 0 is always read out.
bits : 1 - 8 (8 bit)
access : read
CRC0 Data Register LSB 1st
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
DATA_LSB : Data written to this register will be taken to perform CRC calculation with Least Significant Bit (LSB) First.
bits : 0 - 31 (32 bit)
access : write
CRC2 Data Register MSB 1st
address_offset : 0x40 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
DATA_MSB : Data written to this register will be taken to perform CRC calculation with Most Significant Bit (MSB) First.
bits : 0 - 7 (8 bit)
access : write
CRC2 Data Register LSB 1st
address_offset : 0x44 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
DATA_LSB : Data written to this register will be taken to perform CRC calculation with Least Significant Bit (LSB) First.
bits : 0 - 7 (8 bit)
access : write
CRC2 Checksum Register MSB 1st
address_offset : 0x48 Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
RES_MSB : A write access to this register will load CRC2 seed value to CRC1RES_MSB register.
bits : 0 - 15 (16 bit)
access : read-write
CRC2 Checksum Register LSB 1st
address_offset : 0x4C Bytes (0x0)
size : 16 bit
access : read-write
reset_value : 0x0
RES_LSB : A read access to this register read out CRC2 checksum value with LSB First.
bits : 0 - 15 (16 bit)
access : read
CRC2 Clear Register
address_offset : 0x50 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
CLR : Set CRC2 seed value.
bits : 0 - 0 (1 bit)
access : write
__reserve0 : 0 is always read out.
bits : 1 - 8 (8 bit)
access : read
CRC3Data Register MSB 1st
address_offset : 0x60 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
DATA_MSB : Data written to this register will be taken to perform CRC calculation with Most Significant Bit (MSB) First.
bits : 0 - 7 (8 bit)
access : write
CRC3 Data Register LSB 1st
address_offset : 0x64 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
DATA_LSB : Data written to this register will be taken to perform CRC calculation with Least Significant Bit (LSB) First.
bits : 0 - 7 (8 bit)
access : write
CRC3 Checksum Register MSB 1st
address_offset : 0x68 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
RES_MSB : A write access to this register will load CRC3 seed value to CRC1RES_MSB register.
bits : 0 - 7 (8 bit)
access : read-write
CRC3 Checksum Register LSB 1st
address_offset : 0x6C Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
RES_LSB : A read access to this register read out CRC3 checksum value with LSB First.
bits : 0 - 7 (8 bit)
access : read
CRC3 Clear Register
address_offset : 0x70 Bytes (0x0)
size : 8 bit
access : read-write
reset_value : 0x0
CLR : Set CRC3 seed value.
bits : 0 - 0 (1 bit)
access : write
__reserve0 : 0 is always read out.
bits : 1 - 8 (8 bit)
access : read
CRC0 Checksum Register MSB 1st
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
RES_MSB : A write access to this register will load CRC0 seed value to CRC0RES_MSB register.
bits : 0 - 31 (32 bit)
access : read-write
CRC0 Checksum Register LSB 1st
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
RES_LSB : A read access to this register read out CRC0 checksum value with LSB First.
bits : 0 - 31 (32 bit)
access : read
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.