\n
address_offset : 0x0 Bytes (0x0)
size : 0x4C byte (0x0)
mem_usage : registers
protection :
Sampling Clock Setting Register 0
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CK0 : Sampling clock frequency selection for IRQ00
bits : 0 - 2 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read-write
CK1 : Sampling clock frequency selection for IRQ01
bits : 4 - 10 (7 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 7 - 14 (8 bit)
access : read-write
CK2 : Sampling clock frequency selection for IRQ02
bits : 8 - 18 (11 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 11 - 22 (12 bit)
access : read-write
CK3 : Sampling clock frequency selection for IRQ03
bits : 12 - 26 (15 bit)
access : read-write
__reserve3 : 0 is always read out.
bits : 15 - 30 (16 bit)
access : read-write
CK4 : Sampling clock frequency selection for IRQ04
bits : 16 - 34 (19 bit)
access : read-write
__reserve4 : 0 is always read out.
bits : 19 - 38 (20 bit)
access : read-write
CK5 : Sampling clock frequency selection for IRQ05
bits : 20 - 42 (23 bit)
access : read-write
__reserve5 : 0 is always read out.
bits : 23 - 46 (24 bit)
access : read-write
__reserve6 : 0 is always read out.
bits : 27 - 54 (28 bit)
access : read-write
__reserve7 : 0 is always read out.
bits : 31 - 62 (32 bit)
access : read-write
Sampling Clock Setting Register 4
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CK0 : Sampling clock frequency selection for TM00A
bits : 0 - 2 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read-write
CK1 : Sampling clock frequency selection for TM00B
bits : 4 - 10 (7 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 7 - 14 (8 bit)
access : read-write
CK2 : Sampling clock frequency selection for TM01A
bits : 8 - 18 (11 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 11 - 22 (12 bit)
access : read-write
CK3 : Sampling clock frequency selection for TM01B
bits : 12 - 26 (15 bit)
access : read-write
__reserve3 : 0 is always read out.
bits : 15 - 30 (16 bit)
access : read-write
CK4 : Sampling clock frequency selection for TM02A
bits : 16 - 34 (19 bit)
access : read-write
__reserve4 : 0 is always read out.
bits : 19 - 38 (20 bit)
access : read-write
CK5 : Sampling clock frequency selection for TM02B
bits : 20 - 42 (23 bit)
access : read-write
__reserve5 : 0 is always read out.
bits : 23 - 46 (24 bit)
access : read-write
CK6 : Sampling clock frequency selection for TM03A
bits : 24 - 50 (27 bit)
access : read-write
__reserve6 : 0 is always read out.
bits : 27 - 54 (28 bit)
access : read-write
CK7 : Sampling clock frequency selection for TM03B
bits : 28 - 58 (31 bit)
access : read-write
__reserve7 : 0 is always read out.
bits : 31 - 62 (32 bit)
access : read-write
Sampling Clock Setting Register 5
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CK0 : Sampling clock frequency selection for TM04A
bits : 0 - 2 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read-write
CK1 : Sampling clock frequency selection for TM04B
bits : 4 - 10 (7 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 7 - 14 (8 bit)
access : read-write
CK2 : Sampling clock frequency selection for TM05A
bits : 8 - 18 (11 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 11 - 22 (12 bit)
access : read-write
CK3 : Sampling clock frequency selection for TM05B
bits : 12 - 26 (15 bit)
access : read-write
__reserve3 : 0 is always read out.
bits : 15 - 30 (16 bit)
access : read-write
CK4 : Sampling clock frequency selection for TM06A
bits : 16 - 34 (19 bit)
access : read-write
__reserve4 : 0 is always read out.
bits : 19 - 38 (20 bit)
access : read-write
CK5 : Sampling clock frequency selection for TM06B
bits : 20 - 42 (23 bit)
access : read-write
__reserve5 : 0 is always read out.
bits : 23 - 46 (24 bit)
access : read-write
CK6 : Sampling clock frequency selection for TM07A
bits : 24 - 50 (27 bit)
access : read-write
__reserve6 : 0 is always read out.
bits : 27 - 54 (28 bit)
access : read-write
CK7 : Sampling clock frequency selection for TM07B
bits : 28 - 58 (31 bit)
access : read-write
__reserve7 : 0 is always read out.
bits : 31 - 62 (32 bit)
access : read-write
Sampling Clock Setting Register 6
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CK0 : Sampling clock frequency selection for TM08A
bits : 0 - 2 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read-write
CK1 : Sampling clock frequency selection for TM08B
bits : 4 - 10 (7 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 7 - 14 (8 bit)
access : read-write
CK2 : Sampling clock frequency selection for TM09A
bits : 8 - 18 (11 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 11 - 22 (12 bit)
access : read-write
CK3 : Sampling clock frequency selection for TM09B
bits : 12 - 26 (15 bit)
access : read-write
__reserve3 : 0 is always read out.
bits : 15 - 30 (16 bit)
access : read-write
CK4 : Sampling clock frequency selection for TM10A
bits : 16 - 34 (19 bit)
access : read-write
__reserve4 : 0 is always read out.
bits : 19 - 38 (20 bit)
access : read-write
CK5 : Sampling clock frequency selection for TM10B
bits : 20 - 42 (23 bit)
access : read-write
__reserve5 : 0 is always read out.
bits : 23 - 46 (24 bit)
access : read-write
CK6 : Sampling clock frequency selection for TM11A
bits : 24 - 50 (27 bit)
access : read-write
__reserve6 : 0 is always read out.
bits : 27 - 54 (28 bit)
access : read-write
CK7 : Sampling clock frequency selection for TM11B
bits : 28 - 58 (31 bit)
access : read-write
__reserve7 : 0 is always read out.
bits : 31 - 62 (32 bit)
access : read-write
Sampling Clock Setting Register 7
address_offset : 0x1C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CK0 : Sampling clock frequency selection for TM12A
bits : 0 - 2 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read-write
CK1 : Sampling clock frequency selection for TM12B
bits : 4 - 10 (7 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 7 - 14 (8 bit)
access : read-write
CK2 : Sampling clock frequency selection for TM13A
bits : 8 - 18 (11 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 11 - 22 (12 bit)
access : read-write
CK3 : Sampling clock frequency selection for TM13B
bits : 12 - 26 (15 bit)
access : read-write
__reserve3 : 0 is always read out.
bits : 15 - 30 (16 bit)
access : read-write
CK4 : Sampling clock frequency selection for TM20A
bits : 16 - 34 (19 bit)
access : read-write
__reserve4 : 0 is always read out.
bits : 19 - 38 (20 bit)
access : read-write
CK5 : Sampling clock frequency selection for TM20B
bits : 20 - 42 (23 bit)
access : read-write
__reserve5 : 0 is always read out.
bits : 23 - 46 (24 bit)
access : read-write
CK6 : Sampling clock frequency selection for TM21A
bits : 24 - 50 (27 bit)
access : read-write
__reserve6 : 0 is always read out.
bits : 27 - 54 (28 bit)
access : read-write
CK7 : Sampling clock frequency selection for TM21B
bits : 28 - 58 (31 bit)
access : read-write
__reserve7 : 0 is always read out.
bits : 31 - 62 (32 bit)
access : read-write
Sampling Clock Setting Register 8
address_offset : 0x20 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CK0 : Sampling clock frequency selection for TM22A
bits : 0 - 2 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read-write
CK1 : Sampling clock frequency selection for TM22B
bits : 4 - 10 (7 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 7 - 14 (8 bit)
access : read-write
CK2 : Sampling clock frequency selection for TM23A
bits : 8 - 18 (11 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 11 - 22 (12 bit)
access : read-write
CK3 : Sampling clock frequency selection for TM23B
bits : 12 - 26 (15 bit)
access : read-write
__reserve3 : 0 is always read out.
bits : 15 - 30 (16 bit)
access : read-write
CK4 : Sampling clock frequency selection for TM24A
bits : 16 - 34 (19 bit)
access : read-write
__reserve4 : 0 is always read out.
bits : 19 - 38 (20 bit)
access : read-write
CK5 : Sampling clock frequency selection for TM24B
bits : 20 - 42 (23 bit)
access : read-write
__reserve5 : 0 is always read out.
bits : 23 - 46 (24 bit)
access : read-write
CK6 : Sampling clock frequency selection for TM25A
bits : 24 - 50 (27 bit)
access : read-write
__reserve6 : 0 is always read out.
bits : 27 - 54 (28 bit)
access : read-write
CK7 : Sampling clock frequency selection for TM25B
bits : 28 - 58 (31 bit)
access : read-write
__reserve7 : 0 is always read out.
bits : 31 - 62 (32 bit)
access : read-write
Sampling Clock Setting Register 1
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CK0 : Sampling clock frequency selection for IRQ08
bits : 0 - 2 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read-write
CK1 : Sampling clock frequency selection for IRQ09
bits : 4 - 10 (7 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 7 - 14 (8 bit)
access : read-write
CK2 : Sampling clock frequency selection for IRQ10
bits : 8 - 18 (11 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 11 - 22 (12 bit)
access : read-write
CK3 : Sampling clock frequency selection for IRQ11
bits : 12 - 26 (15 bit)
access : read-write
__reserve3 : 0 is always read out.
bits : 15 - 30 (16 bit)
access : read-write
CK4 : Sampling clock frequency selection for IRQ12
bits : 16 - 34 (19 bit)
access : read-write
__reserve4 : 0 is always read out.
bits : 19 - 38 (20 bit)
access : read-write
CK5 : Sampling clock frequency selection for IRQ13
bits : 20 - 42 (23 bit)
access : read-write
__reserve5 : 0 is always read out.
bits : 23 - 46 (24 bit)
access : read-write
CK6 : Sampling clock frequency selection for IRQ14
bits : 24 - 50 (27 bit)
access : read-write
__reserve6 : 0 is always read out.
bits : 27 - 54 (28 bit)
access : read-write
CK7 : Sampling clock frequency selection for IRQ15
bits : 28 - 58 (31 bit)
access : read-write
__reserve7 : 0 is always read out.
bits : 31 - 62 (32 bit)
access : read-write
Noise Filter Control Register 0
address_offset : 0x40 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CNT0 : Noise filter enabled/disabled selection for IRQ0
bits : 0 - 0 (1 bit)
access : read-write
CNT1 : Noise filter enabled/disabled selection for IRQ1
bits : 1 - 2 (2 bit)
access : read-write
CNT2 : Noise filter enabled/disabled selection for IRQ2
bits : 2 - 4 (3 bit)
access : read-write
CNT3 : Noise filter enabled/disabled selection for IRQ3
bits : 3 - 6 (4 bit)
access : read-write
CNT4 : Noise filter enabled/disabled selection for IRQ4
bits : 4 - 8 (5 bit)
access : read-write
CNT5 : Noise filter enabled/disabled selection for IRQ5
bits : 5 - 10 (6 bit)
access : read-write
CNT8 : Noise filter enabled/disabled selection for IRQ8
bits : 8 - 16 (9 bit)
access : read-write
CNT9 : Noise filter enabled/disabled selection for IRQ9
bits : 9 - 18 (10 bit)
access : read-write
CNT10 : Noise filter enabled/disabled selection for IRQ10
bits : 10 - 20 (11 bit)
access : read-write
CNT11 : Noise filter enabled/disabled selection for IRQ11
bits : 11 - 22 (12 bit)
access : read-write
CNT12 : Noise filter enabled/disabled selection for IRQ12
bits : 12 - 24 (13 bit)
access : read-write
CNT13 : Noise filter enabled/disabled selection for IRQ13
bits : 13 - 26 (14 bit)
access : read-write
CNT14 : Noise filter enabled/disabled selection for IRQ14
bits : 14 - 28 (15 bit)
access : read-write
CNT15 : Noise filter enabled/disabled selection for IRQ15
bits : 15 - 30 (16 bit)
access : read-write
CNT16 : Noise filter enabled/disabled selection for IRQ16
bits : 16 - 32 (17 bit)
access : read-write
CNT17 : Noise filter enabled/disabled selection for IRQ17
bits : 17 - 34 (18 bit)
access : read-write
CNT18 : Noise filter enabled/disabled selection for IRQ18
bits : 18 - 36 (19 bit)
access : read-write
CNT19 : Noise filter enabled/disabled selection for IRQ19
bits : 19 - 38 (20 bit)
access : read-write
__reserve0 : 0s are always read out.
bits : 20 - 51 (32 bit)
access : read-write
Noise Filter Control Register 1
address_offset : 0x44 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CNT0 : Noise filter enabled/disabled selection for TM00A
bits : 0 - 0 (1 bit)
access : read-write
CNT1 : Noise filter enabled/disabled selection for TM00B
bits : 1 - 2 (2 bit)
access : read-write
CNT2 : Noise filter enabled/disabled selection for TM01A
bits : 2 - 4 (3 bit)
access : read-write
CNT3 : Noise filter enabled/disabled selection for TM01B
bits : 3 - 6 (4 bit)
access : read-write
CNT4 : Noise filter enabled/disabled selection for TM02A
bits : 4 - 8 (5 bit)
access : read-write
CNT5 : Noise filter enabled/disabled selection for TM02B
bits : 5 - 10 (6 bit)
access : read-write
CNT6 : Noise filter enabled/disabled selection for TM03A
bits : 6 - 12 (7 bit)
access : read-write
CNT7 : Noise filter enabled/disabled selection for TM03B
bits : 7 - 14 (8 bit)
access : read-write
CNT8 : Noise filter enabled/disabled selection for TM04A
bits : 8 - 16 (9 bit)
access : read-write
CNT9 : Noise filter enabled/disabled selection for TM04B
bits : 9 - 18 (10 bit)
access : read-write
CNT10 : Noise filter enabled/disabled selection for TM05A
bits : 10 - 20 (11 bit)
access : read-write
CNT11 : Noise filter enabled/disabled selection for TM05B
bits : 11 - 22 (12 bit)
access : read-write
CNT12 : Noise filter enabled/disabled selection for TM06A
bits : 12 - 24 (13 bit)
access : read-write
CNT13 : Noise filter enabled/disabled selection for TM06B
bits : 13 - 26 (14 bit)
access : read-write
CNT14 : Noise filter enabled/disabled selection for TM07A
bits : 14 - 28 (15 bit)
access : read-write
CNT15 : Noise filter enabled/disabled selection for TM07B
bits : 15 - 30 (16 bit)
access : read-write
CNT16 : Noise filter enabled/disabled selection for TM08A
bits : 16 - 32 (17 bit)
access : read-write
CNT17 : Noise filter enabled/disabled selection for TM08B
bits : 17 - 34 (18 bit)
access : read-write
CNT18 : Noise filter enabled/disabled selection for TM09A
bits : 18 - 36 (19 bit)
access : read-write
CNT19 : Noise filter enabled/disabled selection for TM09B
bits : 19 - 38 (20 bit)
access : read-write
CNT20 : Noise filter enabled/disabled selection for TM10A
bits : 20 - 40 (21 bit)
access : read-write
CNT21 : Noise filter enabled/disabled selection for TM10B
bits : 21 - 42 (22 bit)
access : read-write
CNT22 : Noise filter enabled/disabled selection for TM11A
bits : 22 - 44 (23 bit)
access : read-write
CNT23 : Noise filter enabled/disabled selection for TM11B
bits : 23 - 46 (24 bit)
access : read-write
CNT24 : Noise filter enabled/disabled selection for TM12A
bits : 24 - 48 (25 bit)
access : read-write
CNT25 : Noise filter enabled/disabled selection for TM12B
bits : 25 - 50 (26 bit)
access : read-write
CNT26 : Noise filter enabled/disabled selection for TM13A
bits : 26 - 52 (27 bit)
access : read-write
CNT27 : Noise filter enabled/disabled selection for TM13B
bits : 27 - 54 (28 bit)
access : read-write
CNT28 : Noise filter enabled/disabled selection for TM20A
bits : 28 - 56 (29 bit)
access : read-write
CNT29 : Noise filter enabled/disabled selection for TM20B
bits : 29 - 58 (30 bit)
access : read-write
CNT30 : Noise filter enabled/disabled selection for TM21A
bits : 30 - 60 (31 bit)
access : read-write
CNT31 : Noise filter enabled/disabled selection for TM21B
bits : 31 - 62 (32 bit)
access : read-write
Noise Filter Control Register 2
address_offset : 0x48 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CNT0 : Noise filter enabled/disabled selection for TM22A
bits : 0 - 0 (1 bit)
access : read-write
CNT1 : Noise filter enabled/disabled selection for TM22B
bits : 1 - 2 (2 bit)
access : read-write
CNT2 : Noise filter enabled/disabled selection for TM23A
bits : 2 - 4 (3 bit)
access : read-write
CNT3 : Noise filter enabled/disabled selection for TM23B
bits : 3 - 6 (4 bit)
access : read-write
CNT4 : Noise filter enabled/disabled selection for TM24A
bits : 4 - 8 (5 bit)
access : read-write
CNT5 : Noise filter enabled/disabled selection for TM24B
bits : 5 - 10 (6 bit)
access : read-write
CNT6 : Noise filter enabled/disabled selection for TM25A
bits : 6 - 12 (7 bit)
access : read-write
CNT7 : Noise filter enabled/disabled selection for TM25B
bits : 7 - 14 (8 bit)
access : read-write
__reserve0 : 0s are always read out.
bits : 8 - 39 (32 bit)
access : read-write
Sampling Clock Setting Register 2
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
CK0 : Sampling clock frequency selection for IRQ16
bits : 0 - 2 (3 bit)
access : read-write
__reserve0 : 0 is always read out.
bits : 3 - 6 (4 bit)
access : read-write
CK1 : Sampling clock frequency selection for IRQ17
bits : 4 - 10 (7 bit)
access : read-write
__reserve1 : 0 is always read out.
bits : 7 - 14 (8 bit)
access : read-write
CK2 : Sampling clock frequency selection for IRQ18
bits : 8 - 18 (11 bit)
access : read-write
__reserve2 : 0 is always read out.
bits : 11 - 22 (12 bit)
access : read-write
CK3 : Sampling clock frequency selection for IRQ19
bits : 12 - 26 (15 bit)
access : read-write
__reserve3 : 0 is always read out.
bits : 15 - 46 (32 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.