\n
address_offset : 0x0 Bytes (0x0)
size : 0x34 byte (0x0)
mem_usage : registers
protection :
RTC Initialization Register
address_offset : 0x0 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ATVSTS : RTC Active Status (Read Only)
0: RTC is in reset state
1: RTC is in normal active state.
bits : 0 - 0 (1 bit)
access : read-only
INIT : RTC Initialization
After a power-on reset (POR) RTC block should be initialized by writing 0xA5EB1357 to INIT. This will force a hardware reset then release all logic and counters.
bits : 1 - 31 (31 bit)
access : read-write
Calendar Load Register
address_offset : 0x10 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DAY : 1-Day Calendar Digit (0~9)
bits : 0 - 3 (4 bit)
access : read-write
TENDAY : 10-Day Calendar Digit (0~3)
bits : 4 - 5 (2 bit)
access : read-write
MON : 1-Month Calendar Digit (0~9)
bits : 8 - 11 (4 bit)
access : read-write
TENMON : 10-Month Calendar Digit (0~1)
bits : 12 - 12 (1 bit)
access : read-write
YEAR : 1-Year Calendar Digit (0~9)
bits : 16 - 19 (4 bit)
access : read-write
TENYEAR : 10-Year Calendar Digit (0~9)
bits : 20 - 23 (4 bit)
access : read-write
Time Scale Selection Register
address_offset : 0x14 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
_24HEN : 24-hour / 12-hour Mode Selection
Determines whether RTC_TIME and RTC_TALM are in 24-hour mode or 12-hour mode
The range of 24-hour time scale is between 0 and 23.
12-hour time scale:
01(AM01), 02(AM02), 03(AM03), 04(AM04), 05(AM05), 06(AM06)
07(AM07), 08(AM08), 09(AM09), 10(AM10), 11(AM11), 12(AM12)
21(PM01), 22(PM02), 23(PM03), 24(PM04), 25(PM05), 26(PM06)
27(PM07), 28(PM08), 29(PM09), 30(PM10), 31(PM11), 32(PM12)
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
select 12-hour time scale with AM and PM indication
#1 : 1
select 24-hour time scale
End of enumeration elements list.
Day of the Week Register
address_offset : 0x18 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
WEEKDAY : Day of the Week Register
0 (Sunday), 1 (Monday), 2 (Tuesday), 3 (Wednesday)
4 (Thursday), 5 (Friday), 6 (Saturday)
bits : 0 - 2 (3 bit)
access : read-write
Time Alarm Register
address_offset : 0x1C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SEC : 1 Sec Time Digit of Alarm Setting (0~9)
bits : 0 - 3 (4 bit)
access : read-write
TENSEC : 10 Sec Time Digit of Alarm Setting (0~5)
bits : 4 - 6 (3 bit)
access : read-write
MIN : 1 Min Time Digit of Alarm Setting (0~9)
bits : 8 - 11 (4 bit)
access : read-write
TENMIN : 10 Min Time Digit of Alarm Setting (0~5)
bits : 12 - 14 (3 bit)
access : read-write
HR : 1 Hour Time Digit of Alarm Setting (0~9)
bits : 16 - 19 (4 bit)
access : read-write
TENHR : 10 Hour Time Digit of Alarm Setting (0~3)2
bits : 20 - 21 (2 bit)
access : read-write
Calendar Alarm Register
address_offset : 0x20 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
DAY : 1-Day Calendar Digit of Alarm Setting (0~9)
bits : 0 - 3 (4 bit)
access : read-write
TENDAY : 10-Day Calendar Digit of Alarm Setting (0~3)
bits : 4 - 5 (2 bit)
access : read-write
MON : 1-Month Calendar Digit of Alarm Setting (0~9)
bits : 8 - 11 (4 bit)
access : read-write
TENMON : 10-Month Calendar Digit of Alarm Setting (0~1)
bits : 12 - 12 (1 bit)
access : read-write
YEAR : 1-Year Calendar Digit of Alarm Setting (0~9)
bits : 16 - 19 (4 bit)
access : read-write
TENYEAR : 10-Year Calendar Digit of Alarm Setting (0~9)
bits : 20 - 23 (4 bit)
access : read-write
Leap Year Indicator Register
address_offset : 0x24 Bytes (0x0)
size : -1 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
LEAPYEAR : Leap Year Indication Register (Read Only)
bits : 0 - 0 (1 bit)
access : read-only
Enumeration:
#0 : 0
Current year is not a leap year
#1 : 1
Current year is leap year
End of enumeration elements list.
RTC Interrupt Enable Register
address_offset : 0x28 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ALMIEN : Alarm Interrupt Enable
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
RTC Alarm Interrupt is disabled
#1 : 1
RTC Alarm Interrupt is enabled
End of enumeration elements list.
TICKIEN : Time-tick Interrupt and Wakeup-by-tick Enable
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
RTC Time-Tick Interrupt is disabled
#1 : 1
RTC Time-Tick Interrupt is enabled
End of enumeration elements list.
RTC Interrupt Indicator Register
address_offset : 0x2C Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
ALMIF : RTC Alarm Interrupt Flag
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
#0 : 0
Indicates no Alarm Interrupt condition
#1 : 1
Indicates RTC Alarm Interrupt generated
End of enumeration elements list.
TICKIF : RTC Time-tick Interrupt Flag
bits : 1 - 1 (1 bit)
access : read-write
Enumeration:
#0 : 0
Indicates no Time-Tick Interrupt condition
#1 : 1
Indicates RTC Time-Tick Interrupt generated
End of enumeration elements list.
RTC Time Tick Register
address_offset : 0x30 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
TICKSEL : Time Tick Period Select
The RTC time tick period for Periodic Time-Tick Interrupt request.
Time Tick (second) : 1 / (2^TTR)
Note: This register can be read back after the RTC is active.
bits : 0 - 2 (3 bit)
access : read-write
TWKEN : RTC Timer Wakeup CPU Function Enable Bit
If TWKE is set before CPU is in power-down mode, when a RTC Time-Tick or Alarm Match occurs, CPU will wake up.
bits : 3 - 3 (1 bit)
access : read-write
Enumeration:
#0 : 0
Disable Wakeup CPU function
#1 : 1
Enable the Wakeup function
End of enumeration elements list.
RTC Access Enable Register
address_offset : 0x4 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
RWEN : RTC Register Access Enable Password (Write Only)
bits : 0 - 15 (16 bit)
access : write-only
Enumeration:
0xa965 : 43365
Enable RTC acces..s
End of enumeration elements list.
RWENF : RTC Register Access Enable Flag (Read Only)
RTC_INIT : R/W : R/W
RTC_FREQADJ : R/W : -
RTC_TIME : R/W : R
RTC_CAL : R/W : R
RTC_CLKFMT : R/W : R/W
RTC_WEEKDAY : R/W : R
RTC_TALM : R/W : -
RTC_CALM : R/W : -
RTC_LEAPYEAR : R : R
RTC_INTEN : R/W : R/W
RTC_INTSTS : R/W : R/W
RTC_TICK : R/W : -
bits : 16 - 16 (1 bit)
access : read-only
Enumeration:
#0 : 0
RTC register read/write disable
#1 : 1
RTC register read/write enable
End of enumeration elements list.
RTC Frequency Compensation Register
address_offset : 0x8 Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
FRACTION : Fractional Part
Refer to Table 576 RTC Frequency Compensation Example for the examples.
bits : 0 - 5 (6 bit)
access : read-write
INTEGER : Integer Part
Register should contain the value (INT(Factual) - 32761)
The range between 32761 and 32776
bits : 8 - 11 (4 bit)
access : read-write
Time Load Register
address_offset : 0xC Bytes (0x0)
size : -1 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
SEC : 1 Sec Time Digit (0~9)
bits : 0 - 3 (4 bit)
access : read-write
TENSEC : 10 Sec Time Digit (0~5)
bits : 4 - 6 (3 bit)
access : read-write
MIN : 1 Min Time Digit (0~9)
bits : 8 - 11 (4 bit)
access : read-write
TENMIN : 10 Min Time Digit (0~5)
bits : 12 - 14 (3 bit)
access : read-write
HR : 1 Hour Time Digit (0~9)
bits : 16 - 19 (4 bit)
access : read-write
TENHR : 10 Hour Time Digit (0~3)
bits : 20 - 21 (2 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.