\n
address_offset : 0x0 Bytes (0x0)
size : 0x210 byte (0x0)
mem_usage : registers
protection :
Configuration Register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PSEL : This bitfield selects the positive input to the comparator.
bits : 0 - 1 (2 bit)
access : read-write
Enumeration:
0 : VDDADJ
Use VDDADJ for the positive input.
1 : VTEMP
Use the temperature sensor output for the positive input.
2 : VEXT1
Use external voltage 1 for positive input.
3 : VEXT2
Use external voltage 1 for positive input.
End of enumeration elements list.
NSEL : This bitfield selects the negative input to the comparator.
bits : 8 - 17 (10 bit)
access : read-write
Enumeration:
0 : VREFEXT1
Use external reference 1 for reference input.
1 : VREFEXT2
Use external reference 2 for reference input.
3 : VREFEXT3
Use external reference 3 for reference input.
End of enumeration elements list.
LVLSEL : When the reference input NSEL is set to NSEL_DAC, this bitfield selects the voltage level for the negative input to the comparator.
bits : 16 - 35 (20 bit)
access : read-write
Enumeration:
0 : 0P58V
Set Reference input to 0.58 Volts.
1 : 0P77V
Set Reference input to 0.77 Volts.
2 : 0P97V
Set Reference input to 0.97 Volts.
3 : 1P16V
Set Reference input to 1.16 Volts.
4 : 1P35V
Set Reference input to 1.35 Volts.
5 : 1P55V
Set Reference input to 1.55 Volts.
6 : 1P74V
Set Reference input to 1.74 Volts.
7 : 1P93V
Set Reference input to 1.93 Volts.
8 : 2P13V
Set Reference input to 2.13 Volts.
9 : 2P32V
Set Reference input to 2.32 Volts.
10 : 2P51V
Set Reference input to 2.51 Volts.
11 : 2P71V
Set Reference input to 2.71 Volts.
12 : 2P90V
Set Reference input to 2.90 Volts.
13 : 3P09V
Set Reference input to 3.09 Volts.
14 : 3P29V
Set Reference input to 3.29 Volts.
15 : 3P48V
Set Reference input to 3.48 Volts.
End of enumeration elements list.
Voltage Comparator Interrupt registers: Enable
address_offset : 0x200 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OUTLOW : This bit is the vcompout low interrupt.
bits : 0 - 0 (1 bit)
access : read-write
OUTHI : This bit is the vcompout high interrupt.
bits : 1 - 2 (2 bit)
access : read-write
Voltage Comparator Interrupt registers: Status
address_offset : 0x204 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OUTLOW : This bit is the vcompout low interrupt.
bits : 0 - 0 (1 bit)
access : read-write
OUTHI : This bit is the vcompout high interrupt.
bits : 1 - 2 (2 bit)
access : read-write
Voltage Comparator Interrupt registers: Clear
address_offset : 0x208 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OUTLOW : This bit is the vcompout low interrupt.
bits : 0 - 0 (1 bit)
access : read-write
OUTHI : This bit is the vcompout high interrupt.
bits : 1 - 2 (2 bit)
access : read-write
Voltage Comparator Interrupt registers: Set
address_offset : 0x20C Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
OUTLOW : This bit is the vcompout low interrupt.
bits : 0 - 0 (1 bit)
access : read-write
OUTHI : This bit is the vcompout high interrupt.
bits : 1 - 2 (2 bit)
access : read-write
Status Register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
CMPOUT : This bit is 1 if the positive input of the comparator is greater than the negative input.
bits : 0 - 0 (1 bit)
access : read-write
Enumeration:
0 : VOUT_LOW
The negative input of the comparator is greater than the positive input.
1 : VOUT_HIGH
The positive input of the comparator is greater than the negative input.
End of enumeration elements list.
PWDSTAT : This bit indicates the power down state of the voltage comparator.
bits : 1 - 2 (2 bit)
access : read-write
Enumeration:
1 : POWERED_DOWN
The voltage comparator is powered down.
End of enumeration elements list.
Key Register for Powering Down the Voltage Comparator
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
PWDKEY : Key register value.
bits : 0 - 31 (32 bit)
access : read-write
Enumeration:
55 : Key
Key
End of enumeration elements list.
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.