\n
address_offset : 0x0 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection :
address_offset : 0x10 Bytes (0x0)
size : 0x70 byte (0x0)
mem_usage : reserved
protection :
address_offset : 0x80 Bytes (0x0)
size : 0x10 byte (0x0)
mem_usage : registers
protection :
KWUP Control Register 0
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
KEY0EN : KEY0EN
bits : 0 - 0 (1 bit)
access : read-write
KEY0 : KEY0
bits : 4 - 6 (3 bit)
access : read-write
DPE0 : DPE0
bits : 7 - 7 (1 bit)
access : read-write
KWUP Control Register 1
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
KEY1EN : KEY1EN
bits : 0 - 0 (1 bit)
access : read-write
KEY1 : KEY1
bits : 4 - 6 (3 bit)
access : read-write
DPE1 : DPE1
bits : 7 - 7 (1 bit)
access : read-write
KWUP Control Register 2
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
KEY2EN : KEY2EN
bits : 0 - 0 (1 bit)
access : read-write
KEY2 : KEY2
bits : 4 - 6 (3 bit)
access : read-write
DPE2 : DPE2
bits : 7 - 7 (1 bit)
access : read-write
KWUP Port Monitor Register
address_offset : 0x80 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
PKEY0 : PKEY0
bits : 0 - 0 (1 bit)
access : read-only
PKEY1 : PKEY1
bits : 1 - 1 (1 bit)
access : read-only
PKEY2 : PKEY2
bits : 2 - 2 (1 bit)
access : read-only
PKEY3 : PKEY3
bits : 3 - 3 (1 bit)
access : read-only
KWUP Control Register
address_offset : 0x84 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
T1S : T1S
bits : 2 - 3 (2 bit)
access : read-write
T2S : T2S
bits : 4 - 5 (2 bit)
access : read-write
KWUP Interrupt All Clear Register
address_offset : 0x88 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
KEYCLR : KEYCLR
bits : 0 - 3 (4 bit)
access : write-only
KWUP Interrupt Monitor Register
address_offset : 0x8C Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
KEYINT0 : KEYINT0
bits : 0 - 0 (1 bit)
access : read-only
KEYINT1 : KEYINT1
bits : 1 - 1 (1 bit)
access : read-only
KEYINT2 : KEYINT2
bits : 2 - 2 (1 bit)
access : read-only
KEYINT3 : KEYINT3
bits : 3 - 3 (1 bit)
access : read-only
KWUP Control Register 3
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
KEY3EN : KEY3EN
bits : 0 - 0 (1 bit)
access : read-write
KEY3 : KEY3
bits : 4 - 6 (3 bit)
access : read-write
DPE3 : DPE3
bits : 7 - 7 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.