\n
address_offset : 0x0 Bytes (0x0)
size : 0x19 byte (0x0)
mem_usage : registers
protection :
control and status register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP1EN : Comparator 1 enable
bits : 0 - 0 (1 bit)
access : read-write
COMP1_INP_DAC : COMP1_INP_DAC
bits : 1 - 1 (1 bit)
access : read-write
COMP1MODE : Comparator 1 mode
bits : 2 - 3 (2 bit)
access : read-write
COMP1INSEL : Comparator 1 inverting input selection
bits : 4 - 6 (3 bit)
access : read-write
COMP1_OUT_SEL : Comparator 1 output selection
bits : 10 - 13 (4 bit)
access : read-write
COMP1POL : Comparator 1 output polarity
bits : 15 - 15 (1 bit)
access : read-write
COMP1HYST : Comparator 1 hysteresis
bits : 16 - 17 (2 bit)
access : read-write
COMP1_BLANKING : Comparator 1 blanking source
bits : 18 - 20 (3 bit)
access : read-write
COMP1OUT : Comparator 1 output
bits : 30 - 30 (1 bit)
access : read-only
COMP1LOCK : Comparator 1 lock
bits : 31 - 31 (1 bit)
access : read-write
control and status register
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP5EN : Comparator 5 enable
bits : 0 - 0 (1 bit)
access : read-write
COMP5MODE : Comparator 5 mode
bits : 2 - 3 (2 bit)
access : read-write
COMP5INSEL : Comparator 5 inverting input selection
bits : 4 - 6 (3 bit)
access : read-write
COMP5INPSEL : Comparator 5 non inverted input selection
bits : 7 - 7 (1 bit)
access : read-write
COMP5_OUT_SEL : Comparator 5 output selection
bits : 10 - 13 (4 bit)
access : read-write
COMP5POL : Comparator 5 output polarity
bits : 15 - 15 (1 bit)
access : read-write
COMP5HYST : Comparator 5 hysteresis
bits : 16 - 17 (2 bit)
access : read-write
COMP5_BLANKING : Comparator 5 blanking source
bits : 18 - 20 (3 bit)
access : read-write
COMP5OUT : Comparator51 output
bits : 30 - 30 (1 bit)
access : read-only
COMP5LOCK : Comparator 5 lock
bits : 31 - 31 (1 bit)
access : read-write
control and status register
address_offset : 0x14 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP6EN : Comparator 6 enable
bits : 0 - 0 (1 bit)
access : read-write
COMP6MODE : Comparator 6 mode
bits : 2 - 3 (2 bit)
access : read-write
COMP6INSEL : Comparator 6 inverting input selection
bits : 4 - 6 (3 bit)
access : read-write
COMP6INPSEL : Comparator 6 non inverted input selection
bits : 7 - 7 (1 bit)
access : read-write
COM6WINMODE : Comparator 6 window mode
bits : 9 - 9 (1 bit)
access : read-write
COMP6_OUT_SEL : Comparator 6 output selection
bits : 10 - 13 (4 bit)
access : read-write
COMP6POL : Comparator 6 output polarity
bits : 15 - 15 (1 bit)
access : read-write
COMP6HYST : Comparator 6 hysteresis
bits : 16 - 17 (2 bit)
access : read-write
COMP6_BLANKING : Comparator 6 blanking source
bits : 18 - 20 (3 bit)
access : read-write
COMP6OUT : Comparator 6 output
bits : 30 - 30 (1 bit)
access : read-only
COMP6LOCK : Comparator 6 lock
bits : 31 - 31 (1 bit)
access : read-write
control and status register
address_offset : 0x18 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP7EN : Comparator 7 enable
bits : 0 - 0 (1 bit)
access : read-write
COMP7MODE : Comparator 7 mode
bits : 2 - 3 (2 bit)
access : read-write
COMP7INSEL : Comparator 7 inverting input selection
bits : 4 - 6 (3 bit)
access : read-write
COMP7INPSEL : Comparator 7 non inverted input selection
bits : 7 - 7 (1 bit)
access : read-write
COMP7_OUT_SEL : Comparator 7 output selection
bits : 10 - 13 (4 bit)
access : read-write
COMP7POL : Comparator 7 output polarity
bits : 15 - 15 (1 bit)
access : read-write
COMP7HYST : Comparator 7 hysteresis
bits : 16 - 17 (2 bit)
access : read-write
COMP7_BLANKING : Comparator 7 blanking source
bits : 18 - 20 (3 bit)
access : read-write
COMP7OUT : Comparator 7 output
bits : 30 - 30 (1 bit)
access : read-only
COMP7LOCK : Comparator 7 lock
bits : 31 - 31 (1 bit)
access : read-write
control and status register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP2EN : Comparator 2 enable
bits : 0 - 0 (1 bit)
access : read-write
COMP2MODE : Comparator 2 mode
bits : 2 - 3 (2 bit)
access : read-write
COMP2INSEL : Comparator 2 inverting input selection
bits : 4 - 6 (3 bit)
access : read-write
COMP2INPSEL : Comparator 2 non inverted input selection
bits : 7 - 7 (1 bit)
access : read-write
COMP2INMSEL : Comparator 1inverting input selection
bits : 9 - 9 (1 bit)
access : read-write
COMP2_OUT_SEL : Comparator 2 output selection
bits : 10 - 13 (4 bit)
access : read-write
COMP2POL : Comparator 2 output polarity
bits : 15 - 15 (1 bit)
access : read-write
COMP2HYST : Comparator 2 hysteresis
bits : 16 - 17 (2 bit)
access : read-write
COMP2_BLANKING : Comparator 2 blanking source
bits : 18 - 20 (3 bit)
access : read-write
COMP2OUT : Comparator 2 output
bits : 30 - 30 (1 bit)
access : read-only
COMP2LOCK : Comparator 2 lock
bits : 31 - 31 (1 bit)
access : read-write
control and status register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP3EN : Comparator 3 enable
bits : 0 - 0 (1 bit)
access : read-write
COMP3MODE : Comparator 3 mode
bits : 2 - 3 (2 bit)
access : read-write
COMP3INSEL : Comparator 3 inverting input selection
bits : 4 - 6 (3 bit)
access : read-write
COMP3INPSEL : Comparator 3 non inverted input selection
bits : 7 - 7 (1 bit)
access : read-write
COMP3_OUT_SEL : Comparator 3 output selection
bits : 10 - 13 (4 bit)
access : read-write
COMP3POL : Comparator 3 output polarity
bits : 15 - 15 (1 bit)
access : read-write
COMP3HYST : Comparator 3 hysteresis
bits : 16 - 17 (2 bit)
access : read-write
COMP3_BLANKING : Comparator 3 blanking source
bits : 18 - 20 (3 bit)
access : read-write
COMP3OUT : Comparator 3 output
bits : 30 - 30 (1 bit)
access : read-only
COMP3LOCK : Comparator 3 lock
bits : 31 - 31 (1 bit)
access : read-write
control and status register
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
COMP4EN : Comparator 4 enable
bits : 0 - 0 (1 bit)
access : read-write
COMP4MODE : Comparator 4 mode
bits : 2 - 3 (2 bit)
access : read-write
COMP4INSEL : Comparator 4 inverting input selection
bits : 4 - 6 (3 bit)
access : read-write
COMP4INPSEL : Comparator 4 non inverted input selection
bits : 7 - 7 (1 bit)
access : read-write
COM4WINMODE : Comparator 4 window mode
bits : 9 - 9 (1 bit)
access : read-write
COMP4_OUT_SEL : Comparator 4 output selection
bits : 10 - 13 (4 bit)
access : read-write
COMP4POL : Comparator 4 output polarity
bits : 15 - 15 (1 bit)
access : read-write
COMP4HYST : Comparator 4 hysteresis
bits : 16 - 17 (2 bit)
access : read-write
COMP4_BLANKING : Comparator 4 blanking source
bits : 18 - 20 (3 bit)
access : read-write
COMP4OUT : Comparator 4 output
bits : 30 - 30 (1 bit)
access : read-only
COMP4LOCK : Comparator 4 lock
bits : 31 - 31 (1 bit)
access : read-write
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.