\n
address_offset : 0x0 Bytes (0x0)
size : 0x400 byte (0x0)
mem_usage : registers
protection :
Comparator status register
address_offset : 0x0 Bytes (0x0)
size : 32 bit
access : read-only
reset_value : 0x0
reset_Mask : 0x0
C1VAL : COMP channel 1 output status bit
bits : 0 - 0 (1 bit)
C2VAL : COMP channel 2 output status bit
bits : 1 - 1 (1 bit)
C1IF : COMP channel 1 Interrupt Flag
bits : 16 - 16 (1 bit)
C2IF : COMP channel 2 Interrupt Flag
bits : 17 - 17 (1 bit)
Comparator configuration register 2
address_offset : 0x10 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : COMP channel 1 enable bit
bits : 0 - 0 (1 bit)
BRGEN : Scaler bridge enable
bits : 1 - 1 (1 bit)
SCALEN : Voltage scaler enable bit
bits : 2 - 2 (1 bit)
POLARITY : COMP channel 1 polarity selection bit
bits : 3 - 3 (1 bit)
WINMODE : Window comparator mode selection bit
bits : 4 - 4 (1 bit)
ITEN : COMP channel 1 interrupt enable
bits : 6 - 6 (1 bit)
HYST : COMP channel 1 hysteresis selection bits
bits : 8 - 9 (2 bit)
PWRMODE : Power Mode of the COMP channel 1
bits : 12 - 13 (2 bit)
INMSEL : COMP channel 1 inverting input selection field
bits : 16 - 18 (3 bit)
INPSEL : COMP channel 1 non-inverting input selection bit
bits : 20 - 20 (1 bit)
BLANKING : COMP channel 1 blanking source selection bits
bits : 24 - 27 (4 bit)
LOCK : Lock bit
bits : 31 - 31 (1 bit)
Comparator interrupt clear flag register
address_offset : 0x4 Bytes (0x0)
size : 32 bit
access : write-only
reset_value : 0x0
reset_Mask : 0x0
CC1IF : Clear COMP channel 1 Interrupt Flag
bits : 16 - 16 (1 bit)
CC2IF : Clear COMP channel 2 Interrupt Flag
bits : 17 - 17 (1 bit)
Comparator option register
address_offset : 0x8 Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
AFOP : Selection of source for alternate function of output ports
bits : 0 - 10 (11 bit)
OR : Option Register
bits : 11 - 31 (21 bit)
Comparator configuration register 1
address_offset : 0xC Bytes (0x0)
size : 32 bit
access : read-write
reset_value : 0x0
reset_Mask : 0x0
EN : COMP channel 1 enable bit
bits : 0 - 0 (1 bit)
BRGEN : Scaler bridge enable
bits : 1 - 1 (1 bit)
SCALEN : Voltage scaler enable bit
bits : 2 - 2 (1 bit)
POLARITY : COMP channel 1 polarity selection bit
bits : 3 - 3 (1 bit)
ITEN : COMP channel 1 interrupt enable
bits : 6 - 6 (1 bit)
HYST : COMP channel 1 hysteresis selection bits
bits : 8 - 9 (2 bit)
PWRMODE : Power Mode of the COMP channel 1
bits : 12 - 13 (2 bit)
INMSEL : COMP channel 1 inverting input selection field
bits : 16 - 18 (3 bit)
INPSEL : COMP channel 1 non-inverting input selection bit
bits : 20 - 20 (1 bit)
BLANKING : COMP channel 1 blanking source selection bits
bits : 24 - 27 (4 bit)
LOCK : Lock bit
bits : 31 - 31 (1 bit)
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.