Name : STM32F373
Architecture : ARM Cortex-M4 (CM4)
revision : r1p0
endian : little
Number of relevant bits in Interrupt priority : 3
name : ADC
description : Analog to digital converter
base address : 0x0
Interrupt (18) ADC1 : ADC1 interrupt
name : CAN
description : Controller area network
base address : 0x0
Interrupt (19) CAN_TX : USB high priority/CAN_TX
interrupt
Interrupt (20) CAN_RXD : USB low priority/CAN_RXD
interrupt
Interrupt (21) CAN_RXI : CAN_RXI interrupt
Interrupt (22) CAN_SCE : CAN_SCE interrupt
Interrupt (64) COMP1_2 : Comparator 1/comparator 2 global
name : CEC
description : HDMI-CEC controller
base address : 0x0
Interrupt (42) CEC : CEC interrupt
name : CRC
description : cyclic redundancy check calculation unit
base address : 0x0
name : DAC1
description : Digital-to-analog converter
base address : 0x0
Interrupt (54) TIM6_DAC1 : TIM6 global, DAC1 Cahnnel1 and Cahnnel2
underrun error Interrupts
name : DAC2
description : Digital-to-analog converter
base address : 0x0
name : DBGMCU
description : Debug support
base address : 0x0
name : DMA1
description : DMA controller 1
base address : 0x0
Interrupt (11) DMA1_CH1 : DMA1 channel 1 interrupt
Interrupt (12) DMA1_CH2 : DMA1 channel 2 interrupt
Interrupt (13) DMA1_CH3 : DMA1 channel 3 interrupt
Interrupt (14) DMA1_CH4 : DMA1 channel 4 interrupt
Interrupt (15) DMA1_CH5 : DMA1 channel 5 interrupt
Interrupt (16) DMA1_CH6 : DMA1 channel 6 interrupt
Interrupt (17) DMA1_CH7 : DMA1 Channel 7 interrupt
name : DMA2
description : DMA controller 1
base address : 0x0
Interrupt (56) DMA2_CH1 : DMA2 channel interrupt
Interrupt (57) DMA2_CH2 : DMA2 channel interrupt
Interrupt (58) DMA2_CH3 : DMA2 channel interrupt
Interrupt (59) DMA2_CH4 : DMA2 channel interrupt
Interrupt (60) DMA2_CH5 : DMA2 channel interrupt
name : EXTI
description : External interrupt/event controller
base address : 0x0
Interrupt (1) PVD : Power voltage detector through EXTI line
detection interrupt
Interrupt (2) TAMP : Tamper and timestamp through EXTI19
line
Interrupt (6) EXTI0 : EXTI Line 0 interrupt
Interrupt (7) EXTI1 : EXTI Line1 interrupt
Interrupt (8) EXTI2_TS : EXTI Line 2 and routing interface
interrupt
Interrupt (9) EXTI3 : EXTI Line1 interrupt
Interrupt (10) EXTI4 : EXTI Line4 interrupt
Interrupt (23) EXTI5_9 : EXTI Line[9:5] interrupts
Interrupt (31) I2C1_EV : I2C1_EV global interrupt/EXTI Line[3:2]
interrupts
Interrupt (33) I2C2_EV : I2C2_EV global interrupt/EXTI Line[4:2]
interrupts
Interrupt (37) USART1 : USART1 global interrupt/EXTI25 (USART1 wakeup
event)
Interrupt (38) USART2 : USART2 global interrupt/EXTI26 (USART1 wakeup
event)
Interrupt (39) USART3 : USART3 global interrupt/EXTI28 (USART1 wakeup
event)
Interrupt (40) EXTI15_10 : EXTI Line[15:10] interrupts
name : Flash
description : Flash
base address : 0x0
Interrupt (4) FLASH : Flash global interrupt
name : FPU
description : Floting point unit
base address : 0x0
Interrupt (81) FPU : Floating point interrupt
name : FPU_CPACR
description : Floating point unit CPACR
base address : 0x0
name : GPIOA
description : General-purpose I/Os
base address : 0x0
name : GPIOB
description : General-purpose I/Os
base address : 0x0
name : GPIOC
description : General-purpose I/Os
base address : 0x0
name : GPIOD
description : General-purpose I/Os
base address : 0x0
name : GPIOE
description : General-purpose I/Os
base address : 0x0
name : GPIOF
description : General-purpose I/Os
base address : 0x0
name : I2C1
description : Inter-integrated circuit
base address : 0x0
Interrupt (31) I2C1_EV : I2C1_EV global interrupt/EXTI Line[3:2]
interrupts
Interrupt (32) I2C1_ER : I2C1_ER
name : I2C2
description : Inter-integrated circuit
base address : 0x0
Interrupt (33) I2C2_EV : I2C2_EV global interrupt/EXTI Line[4:2]
interrupts
Interrupt (34) I2C2_ER : I2C2_ER
name : I2S2ext
description : Serial peripheral interface/Inter-IC sound
base address : 0x0
name : I2S3ext
description : Serial peripheral interface/Inter-IC sound
base address : 0x0
name : IWDG
description : Independent watchdog
base address : 0x0
name : MPU
description : Memory protection unit
base address : 0x0
name : NVIC
description : Nested Vectored Interrupt Controller
base address : 0x0
name : NVIC_STIR
description : Nested vectored interrupt controller
base address : 0x0
name : PWR
description : Power control
base address : 0x0
name : RCC
description : Reset and clock control
base address : 0x0
Interrupt (5) RCC : RCC global interrupt
name : RTC
description : Real-time clock
base address : 0x0
Interrupt (3) RTC_WKUP : RTC
Interrupt (41) RTC_ALARM : RTC alarm interrupt
name : SCB
description : System control block
base address : 0x0
name : SCB_ACTRL
description : System control block ACTLR
base address : 0x0
name : SDADC1
description : Sigma-delta analog-to-digital converter
base address : 0x0
Interrupt (61) SDADC1 : ADC sigma delta 1 (SDADC1) global
interrupt
name : SDADC2
description : Sigma-delta analog-to-digital converter
base address : 0x0
Interrupt (62) SDADC2 : ADC sigma delta 2 (SDADC2) global
interrupt
name : SDADC3
description : Sigma-delta analog-to-digital converter
base address : 0x0
Interrupt (63) SDADC3 : ADC sigma delta 3 (SDADC3) global
interrupt
name : SPI1
description : Serial peripheral interface/Inter-IC sound
base address : 0x0
Interrupt (35) SPI1 : SPI1 global interrupt
name : SPI2
description : Serial peripheral interface/Inter-IC sound
base address : 0x0
Interrupt (36) SPI2 : SPI2 global interrupt
name : SPI3
description : Serial peripheral interface/Inter-IC sound
base address : 0x0
Interrupt (51) SPI3 : SPI3 global interrupt
name : STK
description : SysTick timer
base address : 0x0
name : SYSCFG_COMP_OPAMP
description : System configuration controller
base address : 0x0
name : TIM12
description : General purpose timers
base address : 0x0
Interrupt (43) TIM12 : Timer 12 global interrupt
name : TIM13
description : General purpose timers
base address : 0x0
Interrupt (44) TIM13 : Timer 13 global interrupt
name : TIM14
description : General purpose timers
base address : 0x0
Interrupt (45) TIM14 : Timer 14 global interrupt
name : TIM15
description : General purpose timers
base address : 0x0
Interrupt (24) TIM15 : Timer 15 global interrupt
name : TIM16
description : General-purpose-timers
base address : 0x0
Interrupt (25) TIM16 : Timer 16 global interrupt
name : TIM17
description : General-purpose-timers
base address : 0x0
Interrupt (26) TIM17 : Timer 17 global interrupt
name : TIM18
description : Basic timers
base address : 0x0
Interrupt (27) TIM18_DAC : Timer 18 global interrupt/DAC3 underrun
interrupt
name : TIM19
description : General purpose timer
base address : 0x0
Interrupt (78) TIM19 : Timer 19 global interrupt
name : TIM2
description : General purpose timer
base address : 0x0
Interrupt (28) TIM2 : Timer 2 global interrupt
name : TIM3
description : General purpose timer
base address : 0x0
Interrupt (29) TIM3 : Timer 3 global interrupt
name : TIM4
description : General purpose timer
base address : 0x0
Interrupt (30) TIM4 : Timer 4 global interrupt
name : TIM5
description : General purpose timer
base address : 0x0
Interrupt (50) TIM5 : Timer 5 global interrupt
name : TIM6
description : Basic timers
base address : 0x0
Interrupt (54) TIM6_DAC1 : TIM6 global, DAC1 Cahnnel1 and Cahnnel2
underrun error Interrupts
name : TIM7
description : Basic timers
base address : 0x0
Interrupt (55) TIM7 : Timer 7 global interrupt
name : TSC
description : Touch sensing controller
base address : 0x0
name : USART1
description : Universal synchronous asynchronous receiver transmitter
base address : 0x0
Interrupt (37) USART1 : USART1 global interrupt/EXTI25 (USART1 wakeup
event)
name : USART2
description : Universal synchronous asynchronous receiver transmitter
base address : 0x0
Interrupt (38) USART2 : USART2 global interrupt/EXTI26 (USART1 wakeup
event)
name : USART3
description : Universal synchronous asynchronous receiver transmitter
base address : 0x0
Interrupt (39) USART3 : USART3 global interrupt/EXTI28 (USART1 wakeup
event)
name : USB
description : Universal serial bus full-speed device interface
base address : 0x0
Interrupt (19) CAN_TX : USB high priority/CAN_TX
interrupt
Interrupt (20) CAN_RXD : USB low priority/CAN_RXD
interrupt
Interrupt (74) USB_HP : USB High priority interrupt
Interrupt (75) USB_LP : USB Low priority interrupt
Interrupt (76) USB_WAKEUP : USB wakeup interrupt
name : WWDG
description : Window watchdog
base address : 0x0
Interrupt (0) WWDG : Window Watchdog interrupt
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.